From mboxrd@z Thu Jan  1 00:00:00 1970
From: Stefan Roese <sr@denx.de>
Date: Thu, 19 Mar 2009 14:59:39 +0100
Subject: [U-Boot] [PATCH] CFI: geometry reversal for STMicro M29W320DT
In-Reply-To: <49C24DA1.4080508@RuggedCom.com>
References: <49B13CB1.8010704@RuggedCom.com> <200903090930.01771.sr@denx.de>
	<49C24DA1.4080508@RuggedCom.com>
Message-ID: <200903191459.39802.sr@denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hi Richard,

On Thursday 19 March 2009, Richard Retanubun wrote:
> Just following up on this patch, the only other action I've seen on with
> regards to this is to fake the device identification from top-boot to
> bottom boot, but I think this is more 'masking' the problem and I don't
> have enough visibility to see if it is a safe thing to do.
>
> In any case, even the reversal from top-boot to bottom-boot still
> needs identification on a chip-per-chip basis.
>
> In any case, I'd like to know if this patch is [ACK|NACK]?

It's an ACK. Sorry, I forgot to take care of this patch. I'll apply it in 
quickly and ask Wolfgang to pull shortly so that this fix can be included in 
the upcoming 2009-03 release.

Thanks.

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================