* [U-Boot] how to build u-boot environment
@ 2009-04-08 8:01 ong
2009-04-13 22:26 ` Jean-Christophe PLAGNIOL-VILLARD
0 siblings, 1 reply; 2+ messages in thread
From: ong @ 2009-04-08 8:01 UTC (permalink / raw)
To: u-boot
Hi,
May i know how to build the u-boot environment for my board?
Whats the different below. I would like to know how to build u-boot environment. As i know its different with u-boot.bin.
make distclean
make at91sam9263ek_config
make CROSS_COMPILE=<path_to_cross-compiler/cross-compiler-prefix->
make distclean
make at91sam9263ek_dataflash_cs0_config
make CROSS_COMPILE=<path_to_cross-compiler/cross-compiler-prefix->
/Ong
^ permalink raw reply [flat|nested] 2+ messages in thread
* [U-Boot] how to build u-boot environment
2009-04-08 8:01 [U-Boot] how to build u-boot environment ong
@ 2009-04-13 22:26 ` Jean-Christophe PLAGNIOL-VILLARD
0 siblings, 0 replies; 2+ messages in thread
From: Jean-Christophe PLAGNIOL-VILLARD @ 2009-04-13 22:26 UTC (permalink / raw)
To: u-boot
On 16:01 Wed 08 Apr , ong wrote:
> Hi,
>
> May i know how to build the u-boot environment for my board?
you will not build it
you will built where will be store the env
> Whats the different below. I would like to know how to build u-boot environment. As i know its different with u-boot.bin.
please read doc/README.at91
Best Regards,
J.
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2009-04-13 22:26 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-04-08 8:01 [U-Boot] how to build u-boot environment ong
2009-04-13 22:26 ` Jean-Christophe PLAGNIOL-VILLARD
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox