From mboxrd@z Thu Jan  1 00:00:00 1970
From: Stefan Roese <sr@denx.de>
Date: Wed, 15 Apr 2009 16:14:07 +0200
Subject: [U-Boot] Disabling PCI on PPC460EX
In-Reply-To: <49E5E665.1090409@embedded-sol.com>
References: <49E5E665.1090409@embedded-sol.com>
Message-ID: <200904151614.07341.sr@denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hi Felix,

On Wednesday 15 April 2009, Felix Radensky wrote:
> Is there a way to disable PCI on 460EX (via some config option)
> while leaving PCI-E enabled ? I'm asking because on custom board
> I have PCI is unused, but both PCI-E slots should be enabled.  I had
> problems with this in u-boot-1.3.4, and had to modify pci_init_board()
> to not invoke pci_440_init().

Could be that you need to change some code here. Patches as always welcome. ;)

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================