[U-Boot] [PATCH] ARM Cortex A8: Move OMAP3 specific reset handler to OMAP3 code

[Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>]

On 09:30 Sat 30 May     , Dirk Behme wrote:
> Reset is SoC specific and not ARM Cortex A8 generic. Move it from generic
> code to OMAP3 SoC specific file.
> 
> CC: "Kim, Heung Jun" <riverful@gmail.com>
> Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
> 
> ---
> 
> This patches fixes the second issue found by riverful in
> 
> http://lists.denx.de/pipermail/u-boot/2009-May/053433.html
> 
> The first issue is fixed by
> 
> http://lists.denx.de/pipermail/u-boot/2009-May/053444.html
> 
>  cpu/arm_cortexa8/omap3/lowlevel_init.S |   12 ++++++++++++
>  cpu/arm_cortexa8/start.S               |   14 --------------
>  2 files changed, 12 insertions(+), 14 deletions(-)
> 
> Index: u-boot-arm/cpu/arm_cortexa8/omap3/lowlevel_init.S
> ===================================================================
> --- u-boot-arm.orig/cpu/arm_cortexa8/omap3/lowlevel_init.S
> +++ u-boot-arm/cpu/arm_cortexa8/omap3/lowlevel_init.S
> @@ -181,6 +181,18 @@ lowlevel_init:
>  	/* back to arch calling code */
>  	mov	pc, lr
>  
> +.global reset_cpu
> +reset_cpu:
> +	ldr	r1, rstctl			@ get addr for global reset
> +						@ reg
> +	mov	r3, #0x2			@ full reset pll + mpu
> +	str	r3, [r1]			@ force reset
> +	mov	r0, r0
> +_loop_forever:
> +	b	_loop_forever
> +rstctl:
> +	.word	PRM_RSTCTRL
> +
please move this to reset.S other wise fine

Best Regards,
J.