From mboxrd@z Thu Jan  1 00:00:00 1970
From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date: Mon, 1 Jun 2009 18:22:35 +0200
Subject: [U-Boot] [PATCH 2/3] ZOOM2 detect the version of the
	zoom2	board at runtime.
In-Reply-To: <1243609112-11777-3-git-send-email-Tom.Rix@windriver.com>
References: <1243609112-11777-1-git-send-email-Tom.Rix@windriver.com>
	<1243609112-11777-2-git-send-email-Tom.Rix@windriver.com>
	<1243609112-11777-3-git-send-email-Tom.Rix@windriver.com>
Message-ID: <20090601162235.GC6399@game.jcrosoft.org>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On 09:58 Fri 29 May     , Tom Rix wrote:
> There are currently 3 versions of the zoom2 board.
> The production board, that is currently being released.
> The beta board, similar in form to the production board but not released.
> The alpha board, a set of PCBs with a very limited circulation.
> 
> GPIO 94 is used to determine the version of the board. If GPIO 94 is clear,
> the board is a production board, otherwise it is a beta board.
> 
> The alpha board will likely be mistaken for a beta board.  An alpha board
> was unavailible for testing.
> 
> This has been tested on the beta and production boards.
> 
> Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
> ---
>  board/omap3/zoom2/zoom2.c |   48 ++++++++++++++++++++++++++++++++++++++++++--
>  board/omap3/zoom2/zoom2.h |    6 +++++
>  2 files changed, 51 insertions(+), 3 deletions(-)
> 
> diff --git a/board/omap3/zoom2/zoom2.c b/board/omap3/zoom2/zoom2.c
> index e5c248d..06e644f 100644
> --- a/board/omap3/zoom2/zoom2.c
> +++ b/board/omap3/zoom2/zoom2.c
> @@ -33,6 +33,7 @@
>  #include <status_led.h>
>  #endif
>  #include <asm/io.h>
> +#include <asm/arch/gpio.h>
>  #include <asm/arch/mem.h>
>  #include <asm/arch/mux.h>
>  #include <asm/arch/sys_proto.h>
> @@ -60,6 +61,46 @@ static u32 gpmc_serial_TL16CP754C[GPMC_MAX_REG] = {
>  	0x1D0904C4, 0
>  };
>  
> +/* Used to track the revision of the board */
> +int zoom2_revision = ZOOM2_REVISION_UNKNOWN;
add static and as the beagle provide a function to get the current version
> +
> +/*
> + * Routine: zoom2_identify
> + * Description: Detect which version of Zoom2 we are running on.
> + */
> +void zoom2_identify(void)
> +{
> +	/*
> +	 * To check for production board vs beta board,
> +	 * check if gpio 94 is clear.
> +	 *
> +	 * No way yet to check for alpha board identity.
> +	 * Alpha boards were produced in very limited quantities
> +	 * and they are not commonly used.  They are mentioned here
> +	 * only for completeness.
> +	 */
> +	if (!omap_request_gpio(94)) {
> +		unsigned int val;
> +
> +		omap_set_gpio_direction(94, 1);
> +		val = omap_get_gpio_datain(94);
> +		omap_free_gpio(94);
> +
> +		if (val)
> +			zoom2_revision = ZOOM2_REVISION_BETA;
> +		else
> +			zoom2_revision = ZOOM2_REVISION_PRODUCTION;
> +	}
> +
> +	printf("Board revision ");
> +	if (ZOOM2_REVISION_PRODUCTION == zoom2_revision)
> +		printf("Production\n");
> +	else if (ZOOM2_REVISION_BETA == zoom2_revision)
> +		printf("Beta\n");
> +	else
> +		printf("Unknown\n");
please use switch
> +}
> +
>  /*
>   * Routine: board_init
>   * Description: Early hardware init.
> @@ -96,10 +137,11 @@ int board_init (void)
>   * Routine: misc_init_r
>   * Description: Configure zoom board specific configurations
>   */
> -int misc_init_r (void)
> +int misc_init_r(void)
>  {
> -	power_init_r ();
> -	dieid_num_r ();
> +	zoom2_identify();
> +	power_init_r();
> +	dieid_num_r();
>  	return 0;
>  }
>  
> diff --git a/board/omap3/zoom2/zoom2.h b/board/omap3/zoom2/zoom2.h
> index cae8a7a..7f15260 100644
> --- a/board/omap3/zoom2/zoom2.h
> +++ b/board/omap3/zoom2/zoom2.h
> @@ -32,6 +32,12 @@ const omap3_sysinfo sysinfo = {
>  	"NAND",
>  };
>  
> +#define ZOOM2_REVISION_UNKNOWN		0
> +#define ZOOM2_REVISION_ALPHA		1
> +#define ZOOM2_REVISION_BETA		2
> +#define ZOOM2_REVISION_PRODUCTION	3
please use an emum

Best Regards,
J.