[U-Boot] [PATCH] nand/mpc512x: Add MPC512x NAND support (NFC)

[Stefan Roese <sr@denx.de>]

On Monday 08 June 2009 12:54:45 Piotr Zi?cik wrote:
> Monday 08 June 2009 09:51:15 Stefan Roese wrote:
> > This patch adds NAND Flash Controller driver for MPC5121 revision 2.
> > All device features, except hardware ECC and power management, are
> > supported.
> >
> > This NFC driver replaces the one orignally posted by John Rigby:
> >
> > "[PATCH] Freescale NFC NAND driver"
> >
> > It's a port of the Linux driver version posted by Piotr Ziecik a few
> > weeks ago. Using this driver has the following advantages (from my poont
> > of view):
> >
> > - Compatibility with the Linux NAND driver (e.g. ECC usage)
>
> I do not see ADS5121 support in posted driver code. ADS5121 board controls
> NAND chip selects via external CPLD and do not use controller chip select
> signals. Linux driver has workaround for this special case.

Yes, I know. I explicitly removed this code because of two reasons:

a) My basic testing platform was the esd mecp5123 board.

b) I did some quick tests on the MCP5121ADS with this code (without
   this ADS specific chip-select handling) and didn't see any error.

So I suggest to add the code as is for now. Such board specific routines can 
be added later on when really needed.

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================