[U-Boot] [patch] rm9200 ethernet driver: board-specific quirk (csb337)

[David Brownell <david-b@pacbell.net>]

On Friday 12 June 2009, Jean-Christophe PLAGNIOL-VILLARD wrote:
> On 11:14 Tue 09 Jun     , David Brownell wrote:

> I'm not really a fan of this
> but ok if I see the csn337 board patch

I meant to send that in before, thanks for the reminder.
The email I just sent has that.

If you don't like it, what would you propose instead?
Remember that *EVERY* Linux kernel (for example) is
expecting these boards to work this way.  I don't
think it's realistic, or desirable, to change Linux
in this way.  It's not supposed to matter what boot
loader gets used.


> > +	/* The CSB337 originally used a version of the MicroMonitor bootloader
> > +	 * which saved Ethernet addresses in the "wrong" order.  Operating
> > +	 * systems (like Linux) know this, and apply a workaround.  Replicate
> > +	 * that MicroMonitor behavior so we avoid needing to make such OS code
> > +	 * care about which bootloader was used.
> > +	 */
> > +	if (machine_is_csb337()) {
>
> please use ifdef to avoid other people size impact due this

The machine_is_X() macros are automatically #ifdeffed in
the header; no size impact.  Read <asm/mach-types.h> ...


> > +		p_mac->EMAC_SA2H = (enetaddr[0] <<  8) | (enetaddr[1]);
> > +		p_mac->EMAC_SA2L = (enetaddr[2] << 24) | (enetaddr[3] << 16)
> > +				 | (enetaddr[4] <<  8) | (enetaddr[5]);
> > +	} else {
> > +		p_mac->EMAC_SA2L = (enetaddr[3] << 24) | (enetaddr[2] << 16)
> > +				 | (enetaddr[1] <<  8) | (enetaddr[0]);
> > +		p_mac->EMAC_SA2H = (enetaddr[5] <<  8) | (enetaddr[4]);
> > +	}
> >  
> Best Regards,
> J.
> 
>