[U-Boot] [PATCH v4 3/3] Marvell Sheevaplug Board support

[Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>]

On 02:32 Fri 19 Jun     , Prafulla Wadaskar wrote:
> 
> > -----Original Message-----
> > From: Prafulla Wadaskar [mailto:prafulla at marvell.com] 
> > Sent: Monday, June 08, 2009 5:35 PM
> > To: u-boot at lists.denx.de
> > Cc: Nicolas Pitre; Manas Saksena; Lennert Buijtenhek; 
> > Prabhanjan Sarnaik; Ronen Shitrit; Ashish Karkare; Prafulla Wadaskar
> > Subject: [PATCH v4 3/3] Marvell Sheevaplug Board support
> > 
> > Reference:
> > http://plugcomputer.org/
> > http://openplug.org/plugwiki/index.php/Das_U-boot_plug_support
> > 
> > This patch is tested for-
> > 1. Boot from DRAM/NAND flash
> > 2. File transfer using tftp
> > 3. NAND flash read/write/erase
> > 4. Linux kernel and RFS Boot from NAND
> > 
> > Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
> > ---
> > Change log:
> > v2: updated as per feedback for v1
> > 
> > v3: updated as per feedback for v2
> > 
> > v4: removed PHY driver dependency, coded in sheevaplug.c
> 
> Hi Jean,
> 
> Network driver dependency (2/3) in this patch series is accepted by Ben
> Anther dependency (1/3), the nand driver is all done, waiting for reply from scott.
> Since this is arm board- who will be custodian to accept this patch? are you? :-)
the board I the others as you point Ben and Scott

Best Regards,
J.