[U-Boot] [PATCH v5 6/6] Marvell Sheevaplug Board support

[Stefan Roese <sr@denx.de>]

On Wednesday 08 July 2009 07:52:27 Prafulla Wadaskar wrote:
> > > > > +/*
> > > > > + * Commands configuration
> > > > > + */
> > > >
> > > > please include config_cmd_default.h
> > >
> > > Hi Jean
> > > I do not want to include config_cmd_default.h All commands in this
> > > file are not supported/required for this board.
> >
> > include/config_cmd_default.h
> >
> > please include this one and undef what you do not needis
>
> Hi Jean,
> Total 13 commands used for this board out of which only 7 are configured in
> config_cmd_default.h. There are total 20 commands defined in
> config_cmd_default.h i.e. I need to undef 13 commands This will add ~15
> lines to the code unnecessarily.
> Secondly config_cmd_default.h may be updated frequently for commands
> addition, which may not be supported/required on this board. Then again we
> have to apply undef patch for this board. Is it mandatory to include this
> file?

It's not mandatory. But one advantage is that by using this file (and not 
uncommenting most of the stuff) all boards have the same look-and-feel by 
supporting the same command sets.

But your command selection looks fine and I think that it's ok to define then 
the way you did.

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================