[U-Boot] [PATCH] ppc4xx: Set default PCI device ID for 405EP boards

[Matthias Fuchs <matthias.fuchs@esd.eu>]

Current code only sets the PCI vendor id to 0x1014 and
leaved device id to 0x0000.

Ths patch ....
a) uses the correct PCI_VENDOR_ID_IBM macro for this
b) sets the default device ID as stated in the UM to 0x0156
   by using PCI_DEVICE_ID_IBM_405GP for this.

Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
---
 cpu/ppc4xx/4xx_pci.c |   11 +++++++++--
 1 files changed, 9 insertions(+), 2 deletions(-)

diff --git a/cpu/ppc4xx/4xx_pci.c b/cpu/ppc4xx/4xx_pci.c
index 33dd743..4b5d636 100644
--- a/cpu/ppc4xx/4xx_pci.c
+++ b/cpu/ppc4xx/4xx_pci.c
@@ -337,8 +337,15 @@ void pci_405gp_init(struct pci_controller *hose)
 	}
 #endif
 
-#if defined(CONFIG_405EP) /* on ppc405ep vendor id is not set */
-	pci_write_config_word(PCIDEVID_405GP, PCI_VENDOR_ID, 0x1014); /* IBM */
+#if defined(CONFIG_405EP)
+	/*
+	 * on ppc405ep vendor/device id is not set
+	 * The user manual says 0x1014 (IBM) / 0x0156 (405GP!)
+	 * are the correct values.
+	 */
+	pci_write_config_word(PCIDEVID_405GP, PCI_VENDOR_ID, PCI_VENDOR_ID_IBM);
+	pci_write_config_word(PCIDEVID_405GP,
+			      PCI_DEVICE_ID, PCI_DEVICE_ID_IBM_405GP);
 #endif
 
 	/*
-- 
1.6.1