[U-Boot] [PATCH-ARM] Add support for Embest SBC2440-II Board 5/7

[Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>]

> +
> +#include <config.h>
> +
> +#ifdef CONFIG_S3C24X0
> +
> +/* Register addresses. */
> +# ifdef CONFIG_S3C2400
> +	#define pWTCON		0x15300000
> +	#define INTMSK		0x14400008
> +	#define CLKDIVN		0x14800014
> +#else
> +	#define pWTCON		0x53000000
> +	#define INTMSK		0x4A000008
> +	#define INTSUBMSK	0x4A00001C
> +	#define CLKDIVN		0x4C000014
> +#endif
pplease move this to soc header
> +
> +/* Configuration values. */
> +#ifdef CONFIG_S3C2440
> +	#define INTSMASK	0xffff
> +	#define CLKDIVVAL	0x5
> +#else
> +	#define INTSMASK	0x3ff
> +	#define CLKDIVVAL	0x3
> +#endif
ditto
> +
> +.globl arch_pre_lowlevel_init
> +arch_pre_lowlevel_init:
> +
> +	/* turn off the watchdog */
> +	ldr	r0, =pWTCON
> +	mov	r1, #0x0
> +	str	r1, [r0]
> +
> +	/*
> +	 * mask all IRQs by setting all bits in the INTMR - default
> +	 */
> +	mov	r1, #0xffffffff
> +	ldr	r0, =INTMSK
> +	str	r1, [r0]
> +# if defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440)
> +	ldr	r1, =INTSMASK
> +	ldr	r0, =INTSUBMSK
> +	str	r1, [r0]
> +# endif
> +
> +	/* FCLK:HCLK:PCLK = 1:2:4 */
> +	/* default FCLK is 120 MHz ! */
> +	ldr	r0, =CLKDIVN
> +	mov	r1, #CLKDIVVAL
> +	str	r1, [r0]
> +
> +#ifdef CONFIG_S3C2440
> +	/* Set asynchronous bus mode */
> +	mrc	p15, 0, r1, c1, c0, 0   /* read ctrl register */
whitespace please fix
> +	orr	r1, r1, #0xc0000000     /* Asynchronous */
whitespace please fix
> +	mcr	p15, 0, r1, c1, c0, 0   /* write ctrl register */
whitespace please fix
> +#endif  /* CONFIG_S3C2440 */
whitespace please fix
> +
> +	mov	pc, lr
> +
> +#endif  /* CONFIG_S3C24X0 */
whitespace please fix
> diff --git a/cpu/arm920t/s3c24x0/speed.c b/cpu/arm920t/s3c24x0/speed.c
> index bb86335..95c4407 100644
> --- a/cpu/arm920t/s3c24x0/speed.c
> +++ b/cpu/arm920t/s3c24x0/speed.c
> @@ -30,15 +30,10 @@
>   */
>  
>  #include <common.h>
> -#if defined(CONFIG_S3C2400) || defined (CONFIG_S3C2410) || defined (CONFIG_TRAB)
> +#ifdef CONFIG_S3C24X0
>  
>  #include <asm/io.h>
> -
> -#if defined(CONFIG_S3C2400)
> -#include <s3c2400.h>
> -#elif defined(CONFIG_S3C2410)
> -#include <s3c2410.h>
> -#endif
> +#include <s3c24x0_cpu.h>
>  
>  #define MPLL 0
>  #define UPLL 1
> @@ -69,6 +64,11 @@ static ulong get_PLLCLK(int pllreg)
please rename it as get_pll_clk_rate
>  	p = ((r & 0x003F0) >> 4) + 2;
>  	s = r & 0x3;
>  
> +#ifdef CONFIG_S3C2440
> +	if (pllreg == MPLL)
> +		return (2 * CONFIG_SYS_CLK_FREQ * m) / (p << s);
> +	else
> +#endif
>  	return (CONFIG_SYS_CLK_FREQ * m) / (p << s);
>  }
>  
> @@ -83,7 +83,23 @@ ulong get_HCLK(void)
please use this style get_xxx_clk_rate

Best Regards,
J.