From mboxrd@z Thu Jan  1 00:00:00 1970
From: Stefan Roese <sr@denx.de>
Date: Fri, 10 Jul 2009 16:27:15 +0200
Subject: [U-Boot] [PATCH] flread: new command for reading indirect
	mapped flashes
In-Reply-To: <200907061047.41621.sr@denx.de>
References: <1246387465-13156-1-git-send-email-vapier@gentoo.org>
	<200907060437.11544.vapier@gentoo.org>
	<200907061047.41621.sr@denx.de>
Message-ID: <200907101627.15704.sr@denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On Monday 06 July 2009 10:47:41 Stefan Roese wrote:
> > > > i guess each flash type would parse the additional commands however
> > > > it liked and so the mtd command would just act as a multiplexer at
> > > > this point. the current spi flash "sf" command is pretty flexible --
> > > > you specify the spi chip select to select the device and you can
> > > > specify other parameters dynamically (like frequency).  so when
> > > > folding it in, we'd have: => mtd device sf <cs> [speed] [mode]
> > > >
> > > > common/cmd_mtd.c
> > > > common/cmd_mtd_sf.c
> > > > common/cmd_mtd_nor.c
> > >
> > > I was more thinking about adding the MTD layer to all FLASH types
> > > supported by this new commandset. Then accessing the device is done via
> > > the MTD functions pointers (mtd->erase, mtd->read, etc). Special FLASH
> > > type specific stuff still needs to be handled in some additional
> > > drivers (like OOB handling for NAND/OneNAND, or SF specific stuff)
> > > though.
> >
> > ok, this seems like it should be doable in a gradual progression.  i.e.
> > today i am only concerned with nor flash, so getting a base framework
> > with that as the only supported flash should be fine.  once we know it
> > can replace the existing cmd_flash.c functions, we can look at folding in
> > other flash types. -mike
>
> I think this is a doable approach. But we first need a general consent on
> this. Other opinions on this are welcome...

No further responses on this. So it seems nobody objects this approach to move 
to a common command interface for all flash types.

Mike, what are your plans here? Will you work in this "mtd" commands interface 
at some time?

Thanks.

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================