[U-Boot] [PATCH] Add support for the KwikByte KBOC OMAP35xx board

[Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>]

Could you regenerate it with the following option
git format-patch -M -B -C
> > + ? ? ? /* Configure GPIOs to output */
> > + ? ? ? writel(~(GPIO23 | GPIO17 | GPIO12 | GPIO11 | GPIO10 | GPIO8 | GPIO2),
> > + ? ? ? ? ? ? ? &gpio6_base->oe);
> > + ? ? ? writel(~(GPIO31 | GPIO30 | GPIO29 | GPIO28 | GPIO22 | GPIO21 |
> > + ? ? ? ? ? ? ? GPIO13 | GPIO12), &gpio5_base->oe);
> > + ? ? ? writel(~(GPIO22 | GPIO13), &gpio1_base->oe);
> > +
> > + ? ? ? /* Set GPIOs */
> > + ? ? ? writel(GPIO23 | GPIO17 | GPIO10 | GPIO8 | GPIO2,
> > + ? ? ? ? ? ? ? &gpio6_base->setdataout);
> > + ? ? ? writel(GPIO31 | GPIO29 | GPIO28 | GPIO22 | GPIO21 | GPIO13 | GPIO12,
> > + ? ? ? ? ? ? ? &gpio5_base->setdataout);
> > + ? ? ? writel(GPIO22 | GPIO13,
> > + ? ? ? ? ? ? ? &gpio1_base->setdataout);
> Aieeeee....... what are these gpios and why do they need to be set high?
> 
> normally you might want to do setdataout followed by oe?
btw we have a gpio API now please use it
> > +
> > + ? ? ? dieid_num_r();
> > +
> > + ? ? ? return 0;
> > +}
> > +
> > +/*
> > + * Routine: set_muxconf_regs
> > + * Description: Setting up the configuration Mux registers specific to the
> > + * ? ? ? ? ? ? hardware. Many pins need to be moved from protect to primary
> > + * ? ? ? ? ? ? mode.
> > + */
> > +void set_muxconf_regs(void)
> > +{
> > + ? ? ? MUX_KBOC();
> > +}
> > diff --git a/board/omap3/kboc/kboc.h b/board/omap3/kboc/kboc.h
please create you own vendor dirent
> > new file mode 100644
> > index 0000000..41c3b9e
> > --- /dev/null
> > +++ b/board/omap3/kboc/kboc.h
> > @@ -0,0 +1,382 @@
> > +/*
> > + * (C) Copyright 2009
> > + * KwikByte <www.kwikbyte.com>
> > + *
> > + * Author :
> > + * ?Christian Owens <christian@kwikbyte.com>
> > + *
> > + * Derived from the following:
> > + *
> > + * (C) Copyright 2008
> > + * Dirk Behme <dirk.behme@gmail.com>
> > + *
> > + * See file CREDITS for list of people who contributed to this
> > + * project.
> > + *
> > + * This program is free software; you can redistribute it and/or
> > + * modify it under the terms of the GNU General Public License as
> > + * published by the Free Software Foundation; either version 2 of
> > + * the License, or (at your option) any later version.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. ?See the
> > + * GNU General Public License for more details.
> > + *
> > + * You should have received a copy of the GNU General Public License
> > + * along with this program; if not, write to the Free Software
> > + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> > + * MA 02111-1307 USA
> > + */
> > +#ifndef _KBOC_H_
> > +#define _KBOC_H_
> > +
> > +const omap3_sysinfo sysinfo = {
> > + ? ? ? DDR_STACKED,
> > + ? ? ? "OMAP3 KBOC board",
> > +#if defined(CONFIG_ENV_IS_IN_ONENAND)
> > + ? ? ? "OneNAND",
> > +#else
> > + ? ? ? "NAND",
> > +#endif
> 
> err... CONFIG_ENV_IS_IN_NAND is defined as 1 in config header.. means
> never support onenand?
> > +};
> > +
> > +/*
> > + * IEN ?- Input Enable
> > + * IDIS - Input Disable
> > + * PTD ?- Pull type Down
> > + * PTU ?- Pull type Up
> > + * DIS ?- Pull type selection is inactive
> > + * EN ? - Pull type selection is active
> > + * M0 ? - Mode 0
> > + * The commented string gives the final mux configuration for that pin
> > + */
> > +#define MUX_KBOC() \
> > + /*SDRC*/\
> > + MUX_VAL(CP(SDRC_D0), ? ? ? ? ?(IEN ?| PTD | DIS | M0)) /*SDRC_D0*/\
> > + MUX_VAL(CP(SDRC_D1), ? ? ? ? ?(IEN ?| PTD | DIS | M0)) /*SDRC_D1*/\
> > + MUX_VAL(CP(SDRC_D2), ? ? ? ? ?(IEN ?| PTD | DIS | M0)) /*SDRC_D2*/\
> > + MUX_VAL(CP(SDRC_D3), ? ? ? ? ?(IEN ?| PTD | DIS | M0)) /*SDRC_D3*/\
> > + MUX_VAL(CP(SDRC_D4), ? ? ? ? ?(IEN ?| PTD | DIS | M0)) /*SDRC_D4*/\
> > + MUX_VAL(CP(SDRC_D5), ? ? ? ? ?(IEN ?| PTD | DIS | M0)) /*SDRC_D5*/\
> > + MUX_VAL(CP(SDRC_D6), ? ? ? ? ?(IEN ?| PTD | DIS | M0)) /*SDRC_D6*/\
> > + MUX_VAL(CP(SDRC_D7), ? ? ? ? ?(IEN ?| PTD | DIS | M0)) /*SDRC_D7*/\
> > + MUX_VAL(CP(SDRC_D8), ? ? ? ? ?(IEN ?| PTD | DIS | M0)) /*SDRC_D8*/\
> > + MUX_VAL(CP(SDRC_D9), ? ? ? ? ?(IEN ?| PTD | DIS | M0)) /*SDRC_D9*/\
> > + MUX_VAL(CP(SDRC_D10), ? ? ? ? (IEN ?| PTD | DIS | M0)) /*SDRC_D10*/\
> > + MUX_VAL(CP(SDRC_D11), ? ? ? ? (IEN ?| PTD | DIS | M0)) /*SDRC_D11*/\
> > + MUX_VAL(CP(SDRC_D12), ? ? ? ? (IEN ?| PTD | DIS | M0)) /*SDRC_D12*/\
> > + MUX_VAL(CP(SDRC_D13), ? ? ? ? (IEN ?| PTD | DIS | M0)) /*SDRC_D13*/\
<snip>
> > + MUX_VAL(CP(D2D_FRINT), ? ? ? ? ? ? ? ?(IEN ?| PTD | EN ?| M0)) /*d2d_frint*/\
> > + MUX_VAL(CP(D2D_DMAREQ0), ? ? ?(IEN ?| PTD | DIS | M0)) /*d2d_dmareq0*/\
> > + MUX_VAL(CP(D2D_DMAREQ1), ? ? ?(IEN ?| PTD | DIS | M0)) /*d2d_dmareq1*/\
> > + MUX_VAL(CP(D2D_DMAREQ2), ? ? ?(IEN ?| PTD | DIS | M0)) /*d2d_dmareq2*/\
> > + MUX_VAL(CP(D2D_DMAREQ3), ? ? ?(IEN ?| PTD | DIS | M0)) /*d2d_dmareq3*/\
> > + MUX_VAL(CP(D2D_N3GTRST), ? ? ?(IEN ?| PTD | DIS | M0)) /*d2d_n3gtrst*/\
> > + MUX_VAL(CP(D2D_N3GTDI), ? ? ? (IEN ?| PTD | DIS | M0)) /*d2d_n3gtdi*/\
> > + MUX_VAL(CP(D2D_N3GTDO), ? ? ? (IEN ?| PTD | DIS | M0)) /*d2d_n3gtdo*/\
> > + MUX_VAL(CP(D2D_N3GTMS), ? ? ? (IEN ?| PTD | DIS | M0)) /*d2d_n3gtms*/\
> > + MUX_VAL(CP(D2D_N3GTCK), ? ? ? (IEN ?| PTD | DIS | M0)) /*d2d_n3gtck*/\
> > + MUX_VAL(CP(D2D_N3GRTCK), ? ? ?(IEN ?| PTD | DIS | M0)) /*d2d_n3grtck*/\
> > + MUX_VAL(CP(D2D_MSTDBY), ? ? ? (IEN ?| PTU | EN ?| M0)) /*d2d_mstdby*/\
> > + MUX_VAL(CP(D2D_SWAKEUP), ? ? ?(IEN ?| PTD | EN ?| M0)) /*d2d_swakeup*/\
> > + MUX_VAL(CP(D2D_IDLEREQ), ? ? ?(IEN ?| PTD | DIS | M0)) /*d2d_idlereq*/\
> > + MUX_VAL(CP(D2D_IDLEACK), ? ? ?(IEN ?| PTU | EN ?| M0)) /*d2d_idleack*/\
> > + MUX_VAL(CP(D2D_MWRITE), ? ? ? (IEN ?| PTD | DIS | M0)) /*d2d_mwrite*/\
> > + MUX_VAL(CP(D2D_SWRITE), ? ? ? (IEN ?| PTD | DIS | M0)) /*d2d_swrite*/\
> > + MUX_VAL(CP(D2D_MREAD), ? ? ? ? ? ? ? ?(IEN ?| PTD | DIS | M0)) /*d2d_mread*/\
> > + MUX_VAL(CP(D2D_SREAD), ? ? ? ? ? ? ? ?(IEN ?| PTD | DIS | M0)) /*d2d_sread*/\
> > + MUX_VAL(CP(D2D_MBUSFLAG), ? ? (IEN ?| PTD | DIS | M0)) /*d2d_mbusflag*/\
> > + MUX_VAL(CP(D2D_SBUSFLAG), ? ? (IEN ?| PTD | DIS | M0)) /*d2d_sbusflag*/\
> > + MUX_VAL(CP(SDRC_CKE0), ? ? ? ? ? ? ? ?(IDIS | PTU | EN ?| M0)) /*sdrc_cke0*/\
> > + MUX_VAL(CP(SDRC_CKE1), ? ? ? ? ? ? ? ?(IDIS | PTU | EN ?| M0)) /*sdrc_cke1*/
> 
> one more reason why the mux needs a big change in mux handling :( I
> think we will end up with 1/2 a dozen crazy and code repetition for
> each board... Arrggghhh...
NM: yes, it's really not easy to follow here
do you plan to do it soon?
> > +
> > +#endif
> > diff --git a/include/configs/omap3_kboc.h b/include/configs/omap3_kboc.h
> > new file mode 100644
> > index 0000000..8a59612
> > --- /dev/null
> > +++ b/include/configs/omap3_kboc.h
> > @@ -0,0 +1,317 @@
> > +/*
> > + * (C) Copyright 2009
> > + * KwikByte <www.kwikbyte.com>
> > + *
> > + * Author :
> > + * ?Christian Owens <christian@kwikbyte.com>
> > + *
> > + * Configuration settings for the KwikByte OMAP3530 KBOC Module.
> > + *
> > + * Derived from the following:
> > + *
> > + * (C) Copyright 2006-2008
> > + * Texas Instruments.
> > + * Richard Woodruff <r-woodruff2@ti.com>
> > + * Syed Mohammed Khasim <x0khasim@ti.com>
> > + *
> > + * Configuration settings for the TI OMAP3530 Beagle board.
> > + *
> > + * See file CREDITS for list of people who contributed to this
> > + * project.
> > + *
> > + * This program is free software; you can redistribute it and/or
> > + * modify it under the terms of the GNU General Public License as
> > + * published by the Free Software Foundation; either version 2 of
> > + * the License, or (at your option) any later version.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. ? ? ? ? See the
> > + * GNU General Public License for more details.
> > + *
> > + * You should have received a copy of the GNU General Public License
> > + * along with this program; if not, write to the Free Software
> > + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> > + * MA 02111-1307 USA
> > + */
> > +
> > +#ifndef __CONFIG_H
> > +#define __CONFIG_H
> > +#include <asm/sizes.h>
> > +
> > +/*
> > + * High Level Configuration Options
> > + */
> > +#define CONFIG_ARMCORTEXA8 ? ? 1 ? ? ? /* This is an ARM V7 CPU core */
> > +#define CONFIG_OMAP ? ? ? ? ? ? ? ? ? ?1 ? ? ? /* in a TI OMAP core */
> > +#define CONFIG_OMAP34XX ? ? ? ? ? ? ? ?1 ? ? ? /* which is a 34XX */
> > +#define CONFIG_OMAP3430 ? ? ? ? ? ? ? ?1 ? ? ? /* which is in a 3430 */
> > +#define CONFIG_OMAP3_KBOC ? ? ?1 ? ? ? /* working with KBOC */
> > +
> > +#include <asm/arch/cpu.h> ? ? ? ? ? ? ?/* get chip and board defs */
> > +#include <asm/arch/omap3.h>
> > +
> > +/*
> > + * Display CPU and Board information
> > + */
> > +#define CONFIG_DISPLAY_CPUINFO ? ? ? ? 1
> > +#define CONFIG_DISPLAY_BOARDINFO ? ? ? 1
> > +
> > +/* Clock Defines */
> > +#define V_OSCK ? ? ? ? ? ? ? ? 26000000 ? ? ? ?/* Clock output from T2 */
> > +#define V_SCLK ? ? ? ? ? ? ? ? (V_OSCK >> 1)
> > +
> > +#undef CONFIG_USE_IRQ ? ? ? ? ? ? ? ? ? ? ? ? ?/* no support for IRQs */
> > +#define CONFIG_MISC_INIT_R
> > +
> > +#define CONFIG_CMDLINE_TAG ? ? ? ? ? ? 1 ? ? ? /* enable passing of ATAGs */
> > +#define CONFIG_SETUP_MEMORY_TAGS ? ? ? 1
> > +#define CONFIG_INITRD_TAG ? ? ? ? ? ? ?1
> > +#define CONFIG_REVISION_TAG ? ? ? ? ? ?1
> > +
> > +/*
> > + * Size of malloc() pool
> > + */
> > +#define CONFIG_ENV_SIZE ? ? ? ? ? ? ? ? ? ? ? ?SZ_128K /* Total Size Environment */
> > + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? /* Sector */
> > +#define CONFIG_SYS_MALLOC_LEN ? ? ? ? ?(CONFIG_ENV_SIZE + SZ_128K)
> > +#define CONFIG_SYS_GBL_DATA_SIZE ? ? ? 128 ? ? /* bytes reserved for */
> > + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? /* initial data */
> > +
> > +/*
> > + * Hardware drivers
> > + */
> > +
> > +/*
> > + * NS16550 Configuration
> > + */
> > +#define V_NS16550_CLK ? ? ? ? ? ? ? ? ?48000000 ? ? ? ?/* 48MHz (APLL96/2) */
> > +
> > +#define CONFIG_SYS_NS16550
> > +#define CONFIG_SYS_NS16550_SERIAL
> > +#define CONFIG_SYS_NS16550_REG_SIZE ? ?(-4)
> > +#define CONFIG_SYS_NS16550_CLK ? ? ? ? V_NS16550_CLK
> > +
> > +/*
> > + * select serial console configuration
> > + */
> > +#define CONFIG_CONS_INDEX ? ? ? ? ? ? ?3
> > +#define CONFIG_SYS_NS16550_COM3 ? ? ? ? ? ? ? ?OMAP34XX_UART3
> > +#define CONFIG_SERIAL3 ? ? ? ? ? ? ? ? 3 ? ? ? /* UART3 on KBOC Rev 0.90 */
> > +
> > +/* allow to overwrite serial and ethaddr */
> > +#define CONFIG_ENV_OVERWRITE
> > +#define CONFIG_BAUDRATE ? ? ? ? ? ? ? ? ? ? ? ?115200
> > +#define CONFIG_SYS_BAUDRATE_TABLE ? ? ?{4800, 9600, 19200, 38400, 57600,\
> > + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? 115200}
> > +#define CONFIG_MMC ? ? ? ? ? ? ? ? ? ? 1
> > +#define CONFIG_OMAP3_MMC ? ? ? ? ? ? ? 1
> > +#define CONFIG_DOS_PARTITION ? ? ? ? ? 1
> > +
> > +/* commands to include */
> > +#include <config_cmd_default.h>
> > +
> > +#define CONFIG_CMD_EXT2 ? ? ? ? ? ? ? ?/* EXT2 Support ? ? ? ? ? ? ? ? */
> > +#define CONFIG_CMD_FAT ? ? ? ? /* FAT support ? ? ? ? ? ? ? ? ?*/
> > +#define CONFIG_CMD_JFFS2 ? ? ? /* JFFS2 Support ? ? ? ? ? ? ? ?*/
> > +#define CONFIG_CMD_MTDPARTS ? ?/* Enable MTD parts commands */
> > +#define CONFIG_MTD_DEVICE ? ? ?/* needed for mtdparts commands */
> > +#define MTDIDS_DEFAULT ? ? ? ? ? ? ? ? "nand0=nand"
> > +#define MTDPARTS_DEFAULT ? ? ? ? ? ? ? "mtdparts=nand:512k(x-loader),"\
> > + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? "1920k(u-boot),128k(u-boot-env),"\
> > + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? "4m(kernel),-(fs)"
> > +
> > +#define CONFIG_CMD_I2C ? ? ? ? /* I2C serial bus support ? ? ? */
> > +#define CONFIG_CMD_MMC ? ? ? ? /* MMC support ? ? ? ? ? ? ? ? ?*/
> > +#define CONFIG_CMD_NAND ? ? ? ? ? ? ? ?/* NAND support ? ? ? ? ? ? ? ? */
> > +
> > +#undef CONFIG_CMD_FLASH ? ? ? ? ? ? ? ?/* flinfo, erase, protect ? ? ? */
> > +#undef CONFIG_CMD_FPGA ? ? ? ? /* FPGA configuration Support ? */
> > +#undef CONFIG_CMD_IMI ? ? ? ? ?/* iminfo ? ? ? ? ? ? ? ? ? ? ? */
> > +#undef CONFIG_CMD_IMLS ? ? ? ? /* List all found images ? ? ? ?*/
> > +#undef CONFIG_CMD_NET ? ? ? ? ?/* bootp, tftpboot, rarpboot ? ?*/
> > +#undef CONFIG_CMD_NFS ? ? ? ? ?/* NFS support ? ? ? ? ? ? ? ? ?*/
> > +
> > +#define CONFIG_SYS_NO_FLASH
> > +#define CONFIG_SYS_I2C_SPEED ? ? ? ? ? 100000
> > +#define CONFIG_SYS_I2C_SLAVE ? ? ? ? ? 1
> > +#define CONFIG_SYS_I2C_BUS ? ? ? ? ? ? 0
> > +#define CONFIG_SYS_I2C_BUS_SELECT ? ? ?1
> > +#define CONFIG_DRIVER_OMAP34XX_I2C ? ? 1
> > +
> > +/*
> > + * Board NAND Info.
> > + */
> > +#define CONFIG_NAND_OMAP_GPMC
> > +#define CONFIG_SYS_NAND_ADDR ? ? ? ? ? NAND_BASE ? ? ? /* physical address */
> > + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? /* to access nand */
> > +#define CONFIG_SYS_NAND_BASE ? ? ? ? ? NAND_BASE ? ? ? /* physical address */
> > + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? /* to access nand at */
> > + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? /* CS0 */
> > +#define GPMC_NAND_ECC_LP_x16_LAYOUT ? ?1
> > +
> > +#define CONFIG_SYS_MAX_NAND_DEVICE ? ? 1 ? ? ? ? ? ? ? /* Max number of NAND */
> > + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? /* devices */
> > +
> > +#define CONFIG_JFFS2_NAND
> > +/* nand device jffs2 lives on */
> > +#define CONFIG_JFFS2_DEV ? ? ? ? ? ? ? "nand0"
> > +/* start of jffs2 partition */
> > +#define CONFIG_JFFS2_PART_OFFSET ? ? ? 0x680000
> > +#define CONFIG_JFFS2_PART_SIZE ? ? ? ? 0xf980000 ? ? ? /* size of jffs2 */
> > + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? /* partition */
> > +
> > +/* Environment information */
> > +#define CONFIG_BOOTDELAY ? ? ? ? ? ? ? 3
> > +
> > +#define CONFIG_EXTRA_ENV_SETTINGS \
> > + ? ? ? "loadaddr=0x82000000\0" \
> > + ? ? ? "console=ttyS2,115200n8\0" \
> > + ? ? ? "videomode=1024x768 at 60,vxres=1024,vyres=768\0" \
> > + ? ? ? "videospec=omapfb:vram:2M,vram:4M\0" \
> > + ? ? ? "mmcargs=setenv bootargs console=${console} " \
> > + ? ? ? ? ? ? ? "video=${videospec},mode:${videomode} " \
> > + ? ? ? ? ? ? ? "root=/dev/mmcblk0p2 rw " \
> > + ? ? ? ? ? ? ? "rootfstype=ext3 rootwait " \
> > + ? ? ? ? ? ? ? "${optargs}\0" \
> > + ? ? ? "nandargs=setenv bootargs console=${console} " \
> > + ? ? ? ? ? ? ? "video=${videospec},mode:${videomode} " \
> > + ? ? ? ? ? ? ? "root=/dev/mtdblock4 rw " \
> > + ? ? ? ? ? ? ? "rootfstype=jffs2 " \
> > + ? ? ? ? ? ? ? "${optargs}\0" \
> > + ? ? ? "loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \
> > + ? ? ? "bootscript=echo Running bootscript from mmc ...; " \
> > + ? ? ? ? ? ? ? "source ${loadaddr}\0" \
> > + ? ? ? "loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \
> > + ? ? ? "mmcboot=echo Booting from mmc ...; " \
> > + ? ? ? ? ? ? ? "run mmcargs; " \
> > + ? ? ? ? ? ? ? "bootm ${loadaddr}\0" \
> > + ? ? ? "nandboot=echo Booting from nand ...; " \
> > + ? ? ? ? ? ? ? "run nandargs; " \
> > + ? ? ? ? ? ? ? "nand read ${loadaddr} 280000 400000; " \
> > + ? ? ? ? ? ? ? "bootm ${loadaddr}\0" \
> > +
> > +#define CONFIG_BOOTCOMMAND \
> > + ? ? ? "if mmc init; then " \
> > + ? ? ? ? ? ? ? "if run loadbootscript; then " \
> > + ? ? ? ? ? ? ? ? ? ? ? "run bootscript; " \
> > + ? ? ? ? ? ? ? "else " \
> > + ? ? ? ? ? ? ? ? ? ? ? "if run loaduimage; then " \
> > + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? "run mmcboot; " \
> > + ? ? ? ? ? ? ? ? ? ? ? "else run nandboot; " \
> > + ? ? ? ? ? ? ? ? ? ? ? "fi; " \
> > + ? ? ? ? ? ? ? "fi; " \
> > + ? ? ? "else run nandboot; fi"
> > +
> > +#define CONFIG_AUTO_COMPLETE ? ? ? ? ? 1
> > +/*
> > + * Miscellaneous configurable options
> > + */
> > +#define V_PROMPT ? ? ? ? ? ? ? ? ? ? ? "OMAP3_KBOC # "
no need of add V_PROMPT define
please use CONFIG_SYS_PROMPT
> > +
> > +#define CONFIG_SYS_LONGHELP ? ? ? ? ? ?/* undef to save memory */
> > +#define CONFIG_SYS_HUSH_PARSER ? ? ? ? /* use "hush" command parser */
> > +#define CONFIG_SYS_PROMPT_HUSH_PS2 ? ? "> "
> > +#define CONFIG_SYS_PROMPT ? ? ? ? ? ? ?V_PROMPT
> > +#define CONFIG_SYS_CBSIZE ? ? ? ? ? ? ?256 ? ? /* Console I/O Buffer Size */
> > +/* Print Buffer Size */
> > +#define CONFIG_SYS_PBSIZE ? ? ? ? ? ? ?(CONFIG_SYS_CBSIZE + \
> > + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? sizeof(CONFIG_SYS_PROMPT) + 16)
Best Regards,
J.