[U-Boot] ARM Pull Request

[Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>]

Hi Wolfgang,

please pull
The following changes since commit 59869ca72df8bc4e4ffa9dd17cb6673bbe010272:
  Wolfgang Denk (1):
        Merge branch 'master' of git://git.denx.de/u-boot-video

are available in the git repository at:

  git://git.denx.de/u-boot-arm.git master

Daniel Mack (2):
      pxa: add clock for system bus 2 arbiter
      pxa: fix CKEN_B register bits

Grazvydas Ignotas (4):
      OMAP3 pandora: pin mux cleanup
      OMAP3 pandora: setup pin mux for pins used on rev3 boards
      OMAP3 pandora: setup pulls for various GPIOs
      OMAP3 pandora: Fix CKE1 MUX setting to allow self-refresh

Jean-Christophe PLAGNIOL-VILLARD (2):
      versatile: specify the board type on the prompt
      versatile: update config and merge to cfi flash driver

Prafulla Wadaskar (2):
      nand: Add Marvell Kirkwood NAND driver
      arm: Kirkwood: bugfix: UART1 bar correction

Sedji Gaouaou (2):
      at91: Introduction of at91sam9g45 SOC.
      at91: Introduction of at91sam9g10 SOC.

 MAINTAINERS                                     |    4 +
 MAKEALL                                         |   38 +-
 Makefile                                        |   41 ++-
 board/armltd/versatile/Makefile                 |    2 +-
 board/armltd/versatile/flash.c                  |  514 -----------------------
 board/atmel/at91sam9261ek/at91sam9261ek.c       |   36 ++
 board/atmel/at91sam9m10g45ek/Makefile           |   55 +++
 board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c |  334 +++++++++++++++
 board/atmel/at91sam9m10g45ek/config.mk          |    1 +
 board/atmel/at91sam9m10g45ek/led.c              |   41 ++
 board/omap3/pandora/pandora.h                   |   86 ++---
 cpu/arm926ejs/at91/Makefile                     |    3 +
 cpu/arm926ejs/at91/at91sam9m10g45_devices.c     |  175 ++++++++
 cpu/arm926ejs/at91/clock.c                      |   12 +-
 doc/README.at91                                 |   22 +-
 drivers/mtd/nand/Makefile                       |    1 +
 drivers/mtd/nand/kirkwood_nand.c                |   82 ++++
 drivers/net/macb.c                              |    6 +-
 include/asm-arm/arch-at91/at91_pmc.h            |    1 +
 include/asm-arm/arch-at91/at91sam9_matrix.h     |    2 +
 include/asm-arm/arch-at91/at91sam9g45.h         |  139 ++++++
 include/asm-arm/arch-at91/at91sam9g45_matrix.h  |  153 +++++++
 include/asm-arm/arch-at91/clk.h                 |    5 +
 include/asm-arm/arch-at91/hardware.h            |    8 +-
 include/asm-arm/arch-at91/memory-map.h          |    1 +
 include/asm-arm/arch-kirkwood/kirkwood.h        |    2 +-
 include/asm-arm/arch-pxa/pxa-regs.h             |   13 +-
 include/configs/at91sam9261ek.h                 |   13 +-
 include/configs/at91sam9m10g45ek.h              |  225 ++++++++++
 include/configs/versatile.h                     |   77 +++-
 30 files changed, 1474 insertions(+), 618 deletions(-)
 delete mode 100644 board/armltd/versatile/flash.c
 create mode 100644 board/atmel/at91sam9m10g45ek/Makefile
 create mode 100644 board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c
 create mode 100644 board/atmel/at91sam9m10g45ek/config.mk
 create mode 100644 board/atmel/at91sam9m10g45ek/led.c
 create mode 100644 cpu/arm926ejs/at91/at91sam9m10g45_devices.c
 create mode 100644 drivers/mtd/nand/kirkwood_nand.c
 create mode 100644 include/asm-arm/arch-at91/at91sam9g45.h
 create mode 100644 include/asm-arm/arch-at91/at91sam9g45_matrix.h
 create mode 100644 include/configs/at91sam9m10g45ek.h

Best Regards,
J.