* [U-Boot] [PATCH 02/03 v2] Add support for Olimex SAM9-L9261 SBC
2009-07-14 19:09 [U-Boot] [PATCH 01/03 v2] Add inverted clock polarity support for Atmel LCD driver Dimitar Dimitrov
@ 2009-07-14 19:13 ` Dimitar Dimitrov
2009-11-22 20:59 ` Wolfgang Denk
2009-07-14 19:16 ` [U-Boot] [PATCH 03/03 v2] Add support for Olimex SAM9-L9260 SBC Dimitar Dimitrov
2009-07-14 19:49 ` [U-Boot] [PATCH 01/03 v2] Add inverted clock polarity support for Atmel LCD driver Wolfgang Denk
2 siblings, 1 reply; 5+ messages in thread
From: Dimitar Dimitrov @ 2009-07-14 19:13 UTC (permalink / raw)
To: u-boot
The SAM9-L9261 board support is based on code for AT91SAM9261EK. Networking
is missing and will be added after the DM9000 support for AT91 boards is
fixed to comply with U-Boot guide-lines.
Signed-off-by: Dimitar Dimitrov <dinuxbg@gmail.com>
---
MAINTAINERS | 3 +
MAKEALL | 1 +
Makefile | 17 +++
board/olimex/sam9_l9261/Makefile | 56 ++++++++
board/olimex/sam9_l9261/config.mk | 1 +
board/olimex/sam9_l9261/led.c | 43 +++++++
board/olimex/sam9_l9261/partition.c | 40 ++++++
board/olimex/sam9_l9261/sam9_l9261.c | 214 +++++++++++++++++++++++++++++++
include/configs/sam9_l9261.h | 229 ++++++++++++++++++++++++++++++++++
tools/Makefile | 3 +
tools/logos/olimex.bmp | Bin 0 -> 27510 bytes
11 files changed, 607 insertions(+), 0 deletions(-)
create mode 100644 board/olimex/sam9_l9261/Makefile
create mode 100644 board/olimex/sam9_l9261/config.mk
create mode 100644 board/olimex/sam9_l9261/led.c
create mode 100644 board/olimex/sam9_l9261/partition.c
create mode 100644 board/olimex/sam9_l9261/sam9_l9261.c
create mode 100644 include/configs/sam9_l9261.h
create mode 100644 tools/logos/olimex.bmp
diff --git a/MAINTAINERS b/MAINTAINERS
index 575a7ec..dfcccf5 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -133,6 +133,9 @@ Jon Diekema <jon.diekema@smiths-aerospace.com>
sbc8260 MPC8260
+Dimitar Dimitrov <dinuxbg@gmail.com>
+ sam9_l9261 AT91SAM9261
+
Dirk Eibach <eibach@gdsys.de>
gdppc440etx PPC440EP/GR
diff --git a/MAKEALL b/MAKEALL
index 020ff73..ecabfcf 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -599,6 +599,7 @@ LIST_at91=" \
m501sk \
pm9261 \
pm9263 \
+ sam9_l9261 \
"
#########################################################################
diff --git a/Makefile b/Makefile
index 090e645..b19c3b0 100644
--- a/Makefile
+++ b/Makefile
@@ -2847,6 +2847,23 @@ at91sam9g45ekes_config : unconfig
pm9263_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm926ejs pm9263 ronetix at91
+sam9_l9261_nandflash_config \
+sam9_l9261_dataflash_cs0_config \
+sam9_l9261_dataflash_cs3_config \
+sam9_l9261_config : unconfig
+ @mkdir -p $(obj)include
+ @if [ "$(findstring _nandflash,$@)" ] ; then \
+ echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \
+ $(XECHO) "... with environment variable in NAND FLASH" ; \
+ elif [ "$(findstring dataflash_cs3,$@)" ] ; then \
+ echo "#define CONFIG_SYS_USE_DATAFLASH_CS3 1" >>$(obj)include/config.h ; \
+ $(XECHO) "... with environment variable in SPI DATAFLASH CS3" ; \
+ else \
+ echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1" >>$(obj)include/config.h ; \
+ $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
+ fi;
+ @$(MKCONFIG) -a sam9_l9261 arm arm926ejs sam9_l9261 olimex at91
+
########################################################################
## ARM Integrator boards - see doc/README-integrator for more info.
integratorap_config \
diff --git a/board/olimex/sam9_l9261/Makefile b/board/olimex/sam9_l9261/Makefile
new file mode 100644
index 0000000..3a1e163
--- /dev/null
+++ b/board/olimex/sam9_l9261/Makefile
@@ -0,0 +1,56 @@
+#
+# (C) Copyright 2003-2008
+# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
+#
+# (C) Copyright 2008
+# Stelian Pop <stelian.pop@leadtechdesign.com>
+# Lead Tech Design <www.leadtechdesign.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS-y += sam9_l9261.o
+COBJS-y += led.o
+COBJS-$(CONFIG_HAS_DATAFLASH) += partition.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS-y))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/olimex/sam9_l9261/config.mk b/board/olimex/sam9_l9261/config.mk
new file mode 100644
index 0000000..ff2cfd1
--- /dev/null
+++ b/board/olimex/sam9_l9261/config.mk
@@ -0,0 +1 @@
+TEXT_BASE = 0x23f00000
diff --git a/board/olimex/sam9_l9261/led.c b/board/olimex/sam9_l9261/led.c
new file mode 100644
index 0000000..5d1c5f2
--- /dev/null
+++ b/board/olimex/sam9_l9261/led.c
@@ -0,0 +1,43 @@
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/at91sam9261.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/io.h>
+
+void coloured_LED_init(void)
+{
+ /* Enable clock */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9261_ID_PIOA);
+
+ at91_set_gpio_output(CONFIG_RED_LED, 1);
+ at91_set_gpio_output(CONFIG_GREEN_LED, 1);
+ at91_set_gpio_output(CONFIG_YELLOW_LED, 1);
+
+ at91_set_gpio_value(CONFIG_RED_LED, 0);
+ at91_set_gpio_value(CONFIG_GREEN_LED, 1);
+ at91_set_gpio_value(CONFIG_YELLOW_LED, 1);
+}
diff --git a/board/olimex/sam9_l9261/partition.c b/board/olimex/sam9_l9261/partition.c
new file mode 100644
index 0000000..c739b11
--- /dev/null
+++ b/board/olimex/sam9_l9261/partition.c
@@ -0,0 +1,40 @@
+/*
+ * (C) Copyright 2008
+ * Ulf Samuelsson <ulf@atmel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+#include <common.h>
+#include <config.h>
+#include <asm/hardware.h>
+#include <dataflash.h>
+
+AT91S_DATAFLASH_INFO dataflash_info[CONFIG_SYS_MAX_DATAFLASH_BANKS];
+
+struct dataflash_addr cs[CONFIG_SYS_MAX_DATAFLASH_BANKS] = {
+ {CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0, 0}, /* Logical adress, CS */
+ {CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3, 3}
+};
+
+/*define the area offsets*/
+dataflash_protect_t area_list[NB_DATAFLASH_AREA] = {
+ {0x00000000, 0x000041FF, FLAG_PROTECT_SET, 0, "Bootstrap"},
+ {0x00004200, 0x000083FF, FLAG_PROTECT_CLEAR, 0, "Environment"},
+ {0x00008400, 0x00041FFF, FLAG_PROTECT_SET, 0, "U-Boot"},
+ {0x00042000, 0x00251FFF, FLAG_PROTECT_CLEAR, 0, "Kernel"},
+ {0x00252000, 0xFFFFFFFF, FLAG_PROTECT_CLEAR, 0, "FS"},
+};
diff --git a/board/olimex/sam9_l9261/sam9_l9261.c b/board/olimex/sam9_l9261/sam9_l9261.c
new file mode 100644
index 0000000..3880204
--- /dev/null
+++ b/board/olimex/sam9_l9261/sam9_l9261.c
@@ -0,0 +1,214 @@
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/at91sam9261.h>
+#include <asm/arch/at91sam9261_matrix.h>
+#include <asm/arch/at91sam9_smc.h>
+#include <asm/arch/at91_common.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_rstc.h>
+#include <asm/arch/clk.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/io.h>
+#include <lcd.h>
+#include <atmel_lcdc.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* ------------------------------------------------------------------------- */
+/*
+ * Miscelaneous platform dependent initialisations
+ */
+
+#ifdef CONFIG_CMD_NAND
+static void at91sam9261_nand_hw_init(void)
+{
+ unsigned long csa;
+
+ /* Enable CS3 */
+ csa = at91_sys_read(AT91_MATRIX_EBICSA);
+ at91_sys_write(AT91_MATRIX_EBICSA,
+ csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
+
+ /* Configure SMC CS3 for NAND/SmartMedia */
+ at91_sys_write(AT91_SMC_SETUP(3),
+ AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(0) |
+ AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(0));
+ at91_sys_write(AT91_SMC_PULSE(3),
+ AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3) |
+ AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3));
+ at91_sys_write(AT91_SMC_CYCLE(3),
+ AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5));
+ at91_sys_write(AT91_SMC_MODE(3),
+ AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
+ AT91_SMC_EXNWMODE_DISABLE |
+#ifdef CONFIG_SYS_NAND_DBW_16
+ AT91_SMC_DBW_16 |
+#else /* CONFIG_SYS_NAND_DBW_8 */
+ AT91_SMC_DBW_8 |
+#endif
+ AT91_SMC_TDF_(2));
+
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9261_ID_PIOC);
+
+ /* Configure RDY/BSY */
+ at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1);
+
+ /* Enable NandFlash */
+ at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
+ at91_set_gpio_output(AT91_PIN_PC14, 1);
+
+ at91_set_A_periph(AT91_PIN_PC0, 0); /* NANDOE */
+ at91_set_A_periph(AT91_PIN_PC1, 0); /* NANDWE */
+}
+#endif
+
+#ifdef CONFIG_LCD
+vidinfo_t panel_info = {
+ vl_col: 320,
+ vl_row: 240,
+ vl_clk: 4965000,
+ vl_sync: 0 /*ATMEL_LCDC_INVLINE_INVERTED |
+ ATMEL_LCDC_INVFRAME_INVERTED */,
+ vl_bpix: 3,
+ vl_tft: 1,
+ vl_hsync_len: 30,
+ vl_left_margin: 20,
+ vl_right_margin:38,
+ vl_vsync_len: 3,
+ vl_upper_margin:4,
+ vl_lower_margin:15,
+ mmio: AT91SAM9261_LCDC_BASE,
+};
+
+void lcd_enable(void)
+{
+ at91_set_gpio_output(AT91_PIN_PA12, 0); /* power up */
+}
+
+void lcd_disable(void)
+{
+ at91_set_gpio_output(AT91_PIN_PA12, 1); /* power down */
+}
+
+static void at91sam9261_lcd_hw_init(void)
+{
+ at91_set_A_periph(AT91_PIN_PB0, 0); /* LCDVSYNC */
+ at91_set_A_periph(AT91_PIN_PB1, 0); /* LCDHSYNC */
+ at91_set_A_periph(AT91_PIN_PB2, 0); /* LCDDOTCK */
+ at91_set_A_periph(AT91_PIN_PB3, 0); /* LCDDEN */
+
+ at91_set_A_periph(AT91_PIN_PB5, 0); /* LCDD R0 */
+ at91_set_A_periph(AT91_PIN_PB6, 0); /* LCDD R1 */
+ at91_set_A_periph(AT91_PIN_PB7, 0); /* LCDD R2 */
+ at91_set_A_periph(AT91_PIN_PB8, 0); /* LCDD R3 */
+ at91_set_A_periph(AT91_PIN_PB9, 0); /* LCDD R4 */
+ at91_set_A_periph(AT91_PIN_PB10, 0); /* LCDD R5 */
+ at91_set_A_periph(AT91_PIN_PB11, 0); /* LCDD R6 */
+ at91_set_A_periph(AT91_PIN_PB12, 0); /* LCDD R7 */
+
+ at91_set_A_periph(AT91_PIN_PB13, 0); /* LCDD G0 */
+ at91_set_A_periph(AT91_PIN_PB14, 0); /* LCDD G1 */
+ at91_set_A_periph(AT91_PIN_PB15, 0); /* LCDD G2 */
+ at91_set_A_periph(AT91_PIN_PB16, 0); /* LCDD G3 */
+ at91_set_A_periph(AT91_PIN_PB17, 0); /* LCDD G4 */
+ at91_set_A_periph(AT91_PIN_PB18, 0); /* LCDD G5 */
+ at91_set_A_periph(AT91_PIN_PB19, 0); /* LCDD G6 */
+ at91_set_A_periph(AT91_PIN_PB20, 0); /* LCDD G7 */
+
+ at91_set_B_periph(AT91_PIN_PB21, 0); /* LCDD B0 */
+ at91_set_B_periph(AT91_PIN_PB22, 0); /* LCDD B1 */
+ at91_set_B_periph(AT91_PIN_PB23, 0); /* LCDD B2 */
+ at91_set_B_periph(AT91_PIN_PB24, 0); /* LCDD B3 */
+ at91_set_B_periph(AT91_PIN_PB25, 0); /* LCDD B4 */
+ at91_set_B_periph(AT91_PIN_PB26, 0); /* LCDD B5 */
+ at91_set_B_periph(AT91_PIN_PB27, 0); /* LCDD B6 */
+ at91_set_B_periph(AT91_PIN_PB28, 0); /* LCDD B7 */
+
+ at91_sys_write(AT91_PMC_SCER, AT91_PMC_HCK1);
+
+ gd->fb_base = AT91SAM9261_SRAM_BASE;
+}
+
+#ifdef CONFIG_LCD_INFO
+#include <nand.h>
+#include <version.h>
+
+void lcd_show_board_info(void)
+{
+ ulong dram_size, nand_size;
+ int i;
+ char temp[32];
+
+ lcd_printf ("%s\n", U_BOOT_VERSION);
+ lcd_printf ("(C) 2009 Olimex Ltd\n");
+ lcd_printf ("support at olimex.com\n");
+ lcd_printf ("%s CPU at %s MHz\n",
+ AT91_CPU_NAME,
+ strmhz(temp, get_cpu_clk_rate()));
+
+ dram_size = 0;
+ for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
+ dram_size += gd->bd->bi_dram[i].size;
+ nand_size = 0;
+ for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
+ nand_size += nand_info[i].size;
+ lcd_printf (" %ld MB SDRAM, %ld MB NAND\n",
+ dram_size >> 20,
+ nand_size >> 20 );
+}
+#endif /* CONFIG_LCD_INFO */
+#endif
+
+int board_init(void)
+{
+ /* Enable Ctrlc */
+ console_init_f();
+
+ /* arch number of AT91SAM9261EK-Board */
+ gd->bd->bi_arch_number = MACH_TYPE_SAM9_L9261;
+ /* adress of boot parameters */
+ gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+
+ at91_serial_hw_init();
+#ifdef CONFIG_CMD_NAND
+ at91sam9261_nand_hw_init();
+#endif
+#ifdef CONFIG_HAS_DATAFLASH
+ at91_spi0_hw_init(1 << 0);
+#endif
+#ifdef CONFIG_LCD
+ at91sam9261_lcd_hw_init();
+#endif
+ return 0;
+}
+
+int dram_init(void)
+{
+ gd->bd->bi_dram[0].start = PHYS_SDRAM;
+ gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
+ return 0;
+}
+
diff --git a/include/configs/sam9_l9261.h b/include/configs/sam9_l9261.h
new file mode 100644
index 0000000..466ee76
--- /dev/null
+++ b/include/configs/sam9_l9261.h
@@ -0,0 +1,229 @@
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * Configuation settings for the SAM9-L9261 board, based on the
+ * AT91SAM9261EK board configuration.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* ARM asynchronous clock */
+#define AT91_CPU_NAME "AT91SAM9261"
+#define AT91_MAIN_CLOCK 18432000 /* 18.432 MHz crystal */
+#define CONFIG_SYS_HZ 1000
+
+#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */
+#define CONFIG_AT91SAM9261 1 /* It's an Atmel AT91SAM9261 SoC*/
+#define CONFIG_SAM9_L9261 1 /* on an SAM9_L9261 Board */
+#define CONFIG_ARCH_CPU_INIT
+#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
+
+#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS 1
+#define CONFIG_INITRD_TAG 1
+
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_SKIP_RELOCATE_UBOOT
+
+/*
+ * Hardware drivers
+ */
+#define CONFIG_ATMEL_USART 1
+#undef CONFIG_USART0
+#undef CONFIG_USART1
+#undef CONFIG_USART2
+#define CONFIG_USART3 1 /* USART 3 is DBGU */
+
+/* LCD */
+#define CONFIG_LCD 1
+#define LCD_BPP LCD_COLOR8
+#define CONFIG_LCD_LOGO 1
+#undef LCD_TEST_PATTERN
+#define CONFIG_LCD_INFO 1
+#define CONFIG_LCD_INFO_BELOW_LOGO 1
+#define CONFIG_SYS_WHITE_ON_BLACK 1
+#define CONFIG_ATMEL_LCD 1
+#define CONFIG_ATMEL_LCD_BGR555 1
+#define CONFIG_ATMEL_LCD_INVCLK 1
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1
+/* LED */
+#define CONFIG_AT91_LED
+#define CONFIG_RED_LED AT91_PIN_PA23 /* this is the power led */
+#define CONFIG_GREEN_LED AT91_PIN_PA13 /* this is the user1 led */
+#define CONFIG_YELLOW_LED AT91_PIN_PA14 /* this is the user2 led */
+
+#define CONFIG_BOOTDELAY 3
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE 1
+#define CONFIG_BOOTP_BOOTPATH 1
+#define CONFIG_BOOTP_GATEWAY 1
+#define CONFIG_BOOTP_HOSTNAME 1
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+#undef CONFIG_CMD_BDI
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_IMI
+#undef CONFIG_CMD_IMLS
+#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_SOURCE
+
+#define CONFIG_CMD_PING 1
+#define CONFIG_CMD_DHCP 1
+#define CONFIG_CMD_NAND 1
+#define CONFIG_CMD_USB 1
+
+/* SDRAM */
+#define CONFIG_NR_DRAM_BANKS 1
+#define PHYS_SDRAM 0x20000000
+#define PHYS_SDRAM_SIZE 0x04000000 /* 64 megs */
+
+/* DataFlash */
+#define CONFIG_ATMEL_DATAFLASH_SPI
+#define CONFIG_HAS_DATAFLASH 1
+#define CONFIG_SYS_SPI_WRITE_TOUT (5*CONFIG_SYS_HZ)
+#define CONFIG_SYS_MAX_DATAFLASH_BANKS 2
+#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */
+#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3 0xD0000000 /* CS3 */
+#define AT91_SPI_CLK 15000000
+#define DATAFLASH_TCSS (0x1a << 16)
+#define DATAFLASH_TCHS (0x1 << 24)
+
+/* NAND flash */
+#ifdef CONFIG_CMD_NAND
+#define CONFIG_NAND_ATMEL
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+#define CONFIG_SYS_NAND_BASE 0x40000000
+#define CONFIG_SYS_NAND_DBW_8 1
+/* our ALE is AD22 */
+#define CONFIG_SYS_NAND_MASK_ALE (1 << 22)
+/* our CLE is AD21 */
+#define CONFIG_SYS_NAND_MASK_CLE (1 << 21)
+#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14
+#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC15
+#endif
+
+/* NOR flash - no real flash on this board */
+#define CONFIG_SYS_NO_FLASH 1
+
+/* Ethernet */
+#define CONFIG_NET_MULTI 1
+#define CONFIG_DRIVER_DM9000 1
+#define CONFIG_DM9000_BASE 0x30000000
+#define DM9000_IO CONFIG_DM9000_BASE
+#define DM9000_DATA (CONFIG_DM9000_BASE + 4)
+#define CONFIG_DM9000_USE_16BIT 1
+#define CONFIG_DM9000_NO_SROM 1
+#define CONFIG_NET_RETRY_COUNT 20
+
+/* USB */
+#define CONFIG_USB_ATMEL
+#define CONFIG_USB_OHCI_NEW 1
+#define CONFIG_DOS_PARTITION 1
+#define CONFIG_SYS_USB_OHCI_CPU_INIT 1
+#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00500000
+#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9261"
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
+#define CONFIG_USB_STORAGE 1
+#define CONFIG_CMD_FAT 1
+
+#define CONFIG_SYS_LOAD_ADDR 0x22000000
+
+#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
+#define CONFIG_SYS_MEMTEST_END 0x23e00000
+
+#ifdef CONFIG_SYS_USE_DATAFLASH_CS0
+
+/* bootstrap + u-boot + env + linux in dataflash on CS0 */
+#define CONFIG_ENV_IS_IN_DATAFLASH 1
+#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400)
+#define CONFIG_ENV_OFFSET 0x4200
+#define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET)
+#define CONFIG_ENV_SIZE 0x4200
+#define CONFIG_BOOTCOMMAND "cp.b 0xC0042000 0x22000000 0x210000; bootm"
+#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
+ "root=/dev/mtdblock0 " \
+ "mtdparts=at91_nand:-(root) " \
+ "rw rootfstype=jffs2"
+
+#elif CONFIG_SYS_USE_DATAFLASH_CS3
+
+/* bootstrap + u-boot + env + linux in dataflash on CS3 */
+#define CONFIG_ENV_IS_IN_DATAFLASH 1
+#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3 + 0x8400)
+#define CONFIG_ENV_OFFSET 0x4200
+#define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3 + CONFIG_ENV_OFFSET)
+#define CONFIG_ENV_SIZE 0x4200
+#define CONFIG_BOOTCOMMAND "cp.b 0xD0042000 0x22000000 0x210000; bootm"
+#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
+ "root=/dev/mtdblock0 " \
+ "mtdparts=at91_nand:-(root) " \
+ "rw rootfstype=jffs2"
+
+#else /* CONFIG_SYS_USE_NANDFLASH */
+
+/* bootstrap + u-boot + env + linux in nandflash */
+#define CONFIG_ENV_IS_IN_NAND 1
+#define CONFIG_ENV_OFFSET 0x60000
+#define CONFIG_ENV_OFFSET_REDUND 0x80000
+#define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */
+#define CONFIG_BOOTCOMMAND "nand read 0x22000000 0xA0000 0x200000; bootm"
+#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
+ "root=/dev/mtdblock5 " \
+ "mtdparts=at91_nand:128k(bootstrap)ro," \
+ "256k(uboot)ro,128k(env1)ro," \
+ "128k(env2)ro,2M(linux),-(root) " \
+ "rw rootfstype=jffs2"
+
+#endif
+
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 }
+
+#define CONFIG_SYS_PROMPT "U-Boot> "
+#define CONFIG_SYS_CBSIZE 256
+#define CONFIG_SYS_MAXARGS 16
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_LONGHELP 1
+#define CONFIG_CMDLINE_EDITING 1
+
+#define ROUND(A, B) (((A) + (B)) & ~((B) - 1))
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
+#define CONFIG_SYS_GBL_DATA_SIZE 128 /* 128 bytes for initial data */
+
+#define CONFIG_STACKSIZE (32*1024) /* regular stack */
+
+#ifdef CONFIG_USE_IRQ
+#error CONFIG_USE_IRQ not supported
+#endif
+
+#endif
diff --git a/tools/Makefile b/tools/Makefile
index 43c284c..c56c56a 100644
--- a/tools/Makefile
+++ b/tools/Makefile
@@ -122,6 +122,9 @@ endif
ifeq ($(VENDOR),atmel)
LOGO_BMP= logos/atmel.bmp
endif
+ifeq ($(VENDOR),olimex)
+LOGO_BMP= logos/olimex.bmp
+endif
ifeq ($(VENDOR),ronetix)
LOGO_BMP= logos/ronetix.bmp
endif
diff --git a/tools/logos/olimex.bmp b/tools/logos/olimex.bmp
new file mode 100644
index 0000000000000000000000000000000000000000..a787d71dd6b9da0f3122d0cce16845bf18e04610
GIT binary patch
literal 27510
zcmeI0J8~w)7KDGn5J3bUHVeRH4fyN<d+@PYu2z66>UB=$c~y5yNX!JS%c!$5zdTi4
z`e)|CufP5I$76i`-M;_ae*N_Hc>La;Pmk~0_s8R}&yUBCKg?ghv~~aW^77KZ%Ri6j
z=jXQmdcL04*EjO@?fTMJ`0juEb>B_>qrdOwzMJ|6>g4|1+;>yoK%Ly5oBM9+8>kcg
zzcIJCZ{WUx`v&eCxNqRTf%^vT8 at O-a?KdF*T0)b=YX9-@<d-&{&Ua3Z9+=F((s?^8
zyY}at#?Hw%eMRNU$!Yv?jbN7BB7>Fg16;P9xx%B0%XxWu{9%Eov)&b%t90-CY&Uad
z2NfTi_3?Ov%ZIzHIhvMbCA>0~AbTCFsp^rM>?=NXYn at UF$8Ud|d)BOr4Ggnc#H-mJ
zW$hLQ at +m^-4Tcl#@!f#}YmH=j^1`<Bq#qWbs?veRlwn%o<4d at Cnqgrf#THB%2pGav
zPmoX*E52;oUTRsrOA at 1^!VqcD-AK57#+l?uvsqJ8=A@wY(-m~)z9IX{6SX+cIx-gx
z+>K-hPdm`Aq^jd>jFo`fC-9-RY!5rNpePRiVvuSdBU_DqX)S*FltO&QN at Ru;!PK$s
z6fq{hlmy{D?NDBYihOP)IPv6ptdlCoq!Ti=sG{$fg5Ja}X~MG#t?Uwld4IQ-j(sK#
z3+O5#3rj24u7-bK$YhKvm7wdnIOiTMv*}qU<F37>PRPcWUT at h@=WK=Ttlv`3JY2>d
z(n`dd<4DgGv9<T5nVN<#<ZDxrKW*HBW7D?cANoG;>o{dN7LAb2Wr}q}i(?5hPqO^U
z4cXZJFtehmwS{GT8UVr#OTI{x>qf>El%EQ~RLh+fgjZ-#g-mj}%0$<@%*BklAA=bq
zoY`ub><M@DMCXW<91S{HYD!~12^kWpPiQV6RZOdCMS_rJ+06=_4P+uT=p9ni)cg+|
zpB(B=>3VL-xQk?&AY=)3_(bOrT>u&v at 5cRsEtf;{x;#7v at fAym%p<F61s|Od6$Toz
zZv#^^3?OPqTbyYqd4q=dNY;eN8Oajr@QKbLx&Sm}-xj21oJd$MV<k9L4B0XWku#E2
zwStdMi256+rgo63l~z)YDk=fiO5u7dLgWp|N=G9{oOvTX5y-xc2Tdk+fg&)G;A%y+
z3L->~Lsr^CjyUsr3g7>DD9OgiVUSrx^&l--tf*BG+2M~`$T2kYS_-=>;5LF!JWNqD
zv at 0rz6yV?~czaePA;OTAwvZ#vJbyJZf40ydKQ-4blF6pBc29|qo>Z$)Lgb8Or7h%$
zGtYf$8Uo(j8*Gd*Yy&8fh%IOg+bc9=Uf>B4hOB^h13BW%BXGswd5Y|7Mw8iFnBUc!
zW6il*(eZ=I6--F7W!gdoapvg at HEibK#Th<qjM=Nzh!92{De6`zA at 6lJee1amAA&Z9
zP3B&%iia at iP*JsF3Hb`|Mn9VKHL91)e0uRL?j9lUbvJG9+Jz568^b0ulR8L_isn^i
z#usH~7D859LXJ4|<VMnr!)y#nP@P*VR9>erw5wtULkl4*Eg?sodGa1<#$h%FC8*A=
z6)LY&7&=rwgrP-{m3ELL&OCXKG~+NEgA!Ed)(Vx^DGVJdAHvWg$VxlN5oeyhh=jnK
z60<$wlew2tv6Q&SPurstaFwCulf|TJ<Z98I!fOg>QzqdEf#G+HRq+TW9jH~56XrBe
zj~k{PR1jxgPvN_($rHl2a%~(LoM^9RQxBNKJbn>mr5)smGjF6P0=hNOTNMwgIF7Vc
zlW&NM1lOTWteC8%AmciP7#(;+oe0t~WcE22gKdqc3%7r<RD6n at VrUU$r5)smGjF6P
z0=fp!WX@d>tzBVQg+pzWt%S||mijTEUOF8);>;WAiGWT9noR7%iclw+s`RM}Lu(LO
z>1gDLGjF6P0=fp!WMUUmL<UJ%DNU)Mm{|x}X$d*v%p2*6fUW^Fnb-x2z(j&8m1z|e
zGYcUrEg?soc_Td$&^3T26T7G)E|m(_f_fE1h#ZHkw1pgT=8d!r=&zn^j2s3TDGaR?
z!G)w|LC^``<<DX|fqz>>I2$}qgK>YM_eyGUBhe?eB1DcuRx*>%ffyZlO~LNUM3liN
z9;R0WP1%9e^i5uKfql{mLKcCL$oF16F!-kSW86hj6TPKoR at hXu((pEt6(h?dODOY1
z4m<Pc?IlLx)psMK^eHpd5FtVS6ly**#t;i2FRRciBSt6lkkZEiW>JAn3azD(Z6ZLb
z9Id_z3oM&V1z8}6n|QE{(hgj;=-PV<UlmGAY0^XphrtAC4^uRx%_SvQEPhgq)3bS5
z>-5V_9AM1I`#RnV5ARaVsH7eQrA>-&-HR(3QvKxXacEAJlb%}Z9L`(}pcJMk3WvPB
zj~~$1GP^yKbYoF*caDfnXEWJE)F+?ZB`F-Tusyb2^DbM^h1?VEkhzr5KT|lE+ at g@}
zp(&ek5y5ApF}w`g>=M$_Fg0CdxQ1S2u=h-dLgV*^WU3Y+e)b$l7KpcIoERmI{<JNu
z!1zOgQ3beCiVi`P4ccmD-6yFFs;ZnbbeV`r==X$3EX9LRxFu5u1ct(e067#<E|I;)
z&un26p^lR>!r8nOM4p^gTG;G4J0l^Pk<F_%$eTomc`NHaNnKFY#A8kjBQrNFNew1f
ze8*U*0&TX=OhjlAQ)U=B5$dqCeNI?gs;@ZBbZoFA4IRT_)Pl$7mJMOmkA8PtJ%<9;
zTNOHeH`gyi*#mAJ_+>b(FA0q)g+ngF+nn)`vm75Hba-H at eItebee*xs_S%cMLtZPt
zfwud;VbFV4%^}}&BR8A(b<vlzq(gq_p|J0VZhLXFb;^sa8^3ShzJdD&?i;vo;Dc}A
w)2B!K=P|#1 at ZMkgcI|4~#f<-b=|}zW^Q~*?AD#Ql-GKat8c&zqOTB@A01O0K1ONa4
literal 0
HcmV?d00001
--
1.5.6.1
^ permalink raw reply related [flat|nested] 5+ messages in thread* [U-Boot] [PATCH 03/03 v2] Add support for Olimex SAM9-L9260 SBC
2009-07-14 19:09 [U-Boot] [PATCH 01/03 v2] Add inverted clock polarity support for Atmel LCD driver Dimitar Dimitrov
2009-07-14 19:13 ` [U-Boot] [PATCH 02/03 v2] Add support for Olimex SAM9-L9261 SBC Dimitar Dimitrov
@ 2009-07-14 19:16 ` Dimitar Dimitrov
2009-07-14 19:49 ` [U-Boot] [PATCH 01/03 v2] Add inverted clock polarity support for Atmel LCD driver Wolfgang Denk
2 siblings, 0 replies; 5+ messages in thread
From: Dimitar Dimitrov @ 2009-07-14 19:16 UTC (permalink / raw)
To: u-boot
The SAM9-L9260 board support is based on code for AT91SAM9260EK. Networking
is missing and will be added after the MACB support for AT91 boards is
fixed to comply with U-Boot guide-lines.
Signed-off-by: Dimitar Dimitrov <dinuxbg@gmail.com>
---
MAINTAINERS | 1 +
Makefile | 17 +++
board/olimex/sam9_l9260/Makefile | 56 +++++++++
board/olimex/sam9_l9260/config.mk | 1 +
board/olimex/sam9_l9260/led.c | 41 +++++++
board/olimex/sam9_l9260/partition.c | 40 +++++++
board/olimex/sam9_l9260/sam9_l9260.c | 111 ++++++++++++++++++
include/configs/sam9_l9260.h | 214 ++++++++++++++++++++++++++++++++++
8 files changed, 481 insertions(+), 0 deletions(-)
create mode 100644 board/olimex/sam9_l9260/Makefile
create mode 100644 board/olimex/sam9_l9260/config.mk
create mode 100644 board/olimex/sam9_l9260/led.c
create mode 100644 board/olimex/sam9_l9260/partition.c
create mode 100644 board/olimex/sam9_l9260/sam9_l9260.c
create mode 100644 include/configs/sam9_l9260.h
diff --git a/MAINTAINERS b/MAINTAINERS
index dfcccf5..8487c36 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -134,6 +134,7 @@ Jon Diekema <jon.diekema@smiths-aerospace.com>
sbc8260 MPC8260
Dimitar Dimitrov <dinuxbg@gmail.com>
+ sam9_l9260 AT91SAM9260
sam9_l9261 AT91SAM9261
Dirk Eibach <eibach@gdsys.de>
diff --git a/Makefile b/Makefile
index b19c3b0..1e39850 100644
--- a/Makefile
+++ b/Makefile
@@ -2847,6 +2847,23 @@ at91sam9g45ekes_config : unconfig
pm9263_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm926ejs pm9263 ronetix at91
+sam9_l9260_nandflash_config \
+sam9_l9260_dataflash_cs0_config \
+sam9_l9260_dataflash_cs1_config \
+sam9_l9260_config : unconfig
+ @mkdir -p $(obj)include
+ @if [ "$(findstring _nandflash,$@)" ] ; then \
+ echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \
+ $(XECHO) "... with environment variable in NAND FLASH" ; \
+ elif [ "$(findstring dataflash_cs0,$@)" ] ; then \
+ echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1" >>$(obj)include/config.h ; \
+ $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
+ else \
+ echo "#define CONFIG_SYS_USE_DATAFLASH_CS1 1" >>$(obj)include/config.h ; \
+ $(XECHO) "... with environment variable in SPI DATAFLASH CS1" ; \
+ fi;
+ @$(MKCONFIG) -a sam9_l9260 arm arm926ejs sam9_l9260 olimex at91
+
sam9_l9261_nandflash_config \
sam9_l9261_dataflash_cs0_config \
sam9_l9261_dataflash_cs3_config \
diff --git a/board/olimex/sam9_l9260/Makefile b/board/olimex/sam9_l9260/Makefile
new file mode 100644
index 0000000..39db0ea
--- /dev/null
+++ b/board/olimex/sam9_l9260/Makefile
@@ -0,0 +1,56 @@
+#
+# (C) Copyright 2003-2008
+# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
+#
+# (C) Copyright 2008
+# Stelian Pop <stelian.pop@leadtechdesign.com>
+# Lead Tech Design <www.leadtechdesign.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS-y += sam9_l9260.o
+COBJS-y += led.o
+COBJS-$(CONFIG_HAS_DATAFLASH) += partition.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS-y))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/olimex/sam9_l9260/config.mk b/board/olimex/sam9_l9260/config.mk
new file mode 100644
index 0000000..ff2cfd1
--- /dev/null
+++ b/board/olimex/sam9_l9260/config.mk
@@ -0,0 +1 @@
+TEXT_BASE = 0x23f00000
diff --git a/board/olimex/sam9_l9260/led.c b/board/olimex/sam9_l9260/led.c
new file mode 100644
index 0000000..2424d27
--- /dev/null
+++ b/board/olimex/sam9_l9260/led.c
@@ -0,0 +1,41 @@
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/at91sam9260.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/io.h>
+
+void coloured_LED_init(void)
+{
+ /* Enable clock */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_PIOA);
+
+ at91_set_gpio_output(CONFIG_RED_LED, 1);
+ at91_set_gpio_output(CONFIG_GREEN_LED, 1);
+
+ at91_set_gpio_value(CONFIG_RED_LED, 0);
+ at91_set_gpio_value(CONFIG_GREEN_LED, 1);
+}
diff --git a/board/olimex/sam9_l9260/partition.c b/board/olimex/sam9_l9260/partition.c
new file mode 100644
index 0000000..2629c67
--- /dev/null
+++ b/board/olimex/sam9_l9260/partition.c
@@ -0,0 +1,40 @@
+/*
+ * (C) Copyright 2008
+ * Ulf Samuelsson <ulf@atmel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+#include <common.h>
+#include <config.h>
+#include <asm/hardware.h>
+#include <dataflash.h>
+
+AT91S_DATAFLASH_INFO dataflash_info[CONFIG_SYS_MAX_DATAFLASH_BANKS];
+
+struct dataflash_addr cs[CONFIG_SYS_MAX_DATAFLASH_BANKS] = {
+ {CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0, 0}, /* Logical adress, CS */
+ {CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1, 1}
+};
+
+/*define the area offsets*/
+dataflash_protect_t area_list[NB_DATAFLASH_AREA] = {
+ {0x00000000, 0x000041FF, FLAG_PROTECT_SET, 0, "Bootstrap"},
+ {0x00004200, 0x000083FF, FLAG_PROTECT_CLEAR, 0, "Environment"},
+ {0x00008400, 0x00041FFF, FLAG_PROTECT_SET, 0, "U-Boot"},
+ {0x00042000, 0x00251FFF, FLAG_PROTECT_CLEAR, 0, "Kernel"},
+ {0x00252000, 0xFFFFFFFF, FLAG_PROTECT_CLEAR, 0, "FS"},
+};
diff --git a/board/olimex/sam9_l9260/sam9_l9260.c b/board/olimex/sam9_l9260/sam9_l9260.c
new file mode 100644
index 0000000..30ea3d0
--- /dev/null
+++ b/board/olimex/sam9_l9260/sam9_l9260.c
@@ -0,0 +1,111 @@
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/at91sam9260.h>
+#include <asm/arch/at91sam9260_matrix.h>
+#include <asm/arch/at91sam9_smc.h>
+#include <asm/arch/at91_common.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_rstc.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/io.h>
+#include <asm/arch/hardware.h>
+#include <netdev.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* ------------------------------------------------------------------------- */
+/*
+ * Miscelaneous platform dependent initialisations
+ */
+
+#ifdef CONFIG_CMD_NAND
+static void at91sam9260_nand_hw_init(void)
+{
+ unsigned long csa;
+
+ /* Enable CS3 */
+ csa = at91_sys_read(AT91_MATRIX_EBICSA);
+ at91_sys_write(AT91_MATRIX_EBICSA,
+ csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
+
+ /* Configure SMC CS3 for NAND/SmartMedia */
+ at91_sys_write(AT91_SMC_SETUP(3),
+ AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(0) |
+ AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(0));
+ at91_sys_write(AT91_SMC_PULSE(3),
+ AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3) |
+ AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3));
+ at91_sys_write(AT91_SMC_CYCLE(3),
+ AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5));
+ at91_sys_write(AT91_SMC_MODE(3),
+ AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
+ AT91_SMC_EXNWMODE_DISABLE |
+#ifdef CONFIG_SYS_NAND_DBW_16
+ AT91_SMC_DBW_16 |
+#else /* CONFIG_SYS_NAND_DBW_8 */
+ AT91_SMC_DBW_8 |
+#endif
+ AT91_SMC_TDF_(2));
+
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_PIOC);
+
+ /* Configure RDY/BSY */
+ at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1);
+
+ /* Enable NandFlash */
+ at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
+}
+#endif
+
+
+int board_init(void)
+{
+ /* Enable Ctrlc */
+ console_init_f();
+
+ /* arch number of SAM9_L9260-Board */
+ gd->bd->bi_arch_number = MACH_TYPE_SAM9_L9260;
+ /* adress of boot parameters */
+ gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+
+ at91_serial_hw_init();
+#ifdef CONFIG_CMD_NAND
+ at91sam9260_nand_hw_init();
+#endif
+#ifdef CONFIG_HAS_DATAFLASH
+ at91_spi0_hw_init((1 << 0) || (1 << 1));
+#endif
+
+ return 0;
+}
+
+int dram_init(void)
+{
+ gd->bd->bi_dram[0].start = PHYS_SDRAM;
+ gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
+ return 0;
+}
+
diff --git a/include/configs/sam9_l9260.h b/include/configs/sam9_l9260.h
new file mode 100644
index 0000000..9232c13
--- /dev/null
+++ b/include/configs/sam9_l9260.h
@@ -0,0 +1,214 @@
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ * Dimitar Dimitrov <dimitar@olimex.com>
+ *
+ * Configuation settings for the SAM9-L9260 board.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* ARM asynchronous clock */
+#define AT91_MAIN_CLOCK 18432000 /* 18.432 MHz crystal */
+#define CONFIG_SYS_HZ 1000
+
+#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */
+
+#define AT91_CPU_NAME "AT91SAM9260"
+#define CONFIG_AT91SAM9260 1 /* It's an Atmel AT91SAM9260 SoC*/
+#define CONFIG_SAM9_L9260 1 /* on an SAM9_L9260 Board */
+
+#define CONFIG_ARCH_CPU_INIT
+#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
+
+#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS 1
+#define CONFIG_INITRD_TAG 1
+
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_SKIP_RELOCATE_UBOOT
+
+/*
+ * Hardware drivers
+ */
+#define CONFIG_ATMEL_USART 1
+#undef CONFIG_USART0
+#undef CONFIG_USART1
+#undef CONFIG_USART2
+#define CONFIG_USART3 1 /* USART 3 is DBGU */
+
+/* LED */
+#define CONFIG_AT91_LED
+#define CONFIG_RED_LED AT91_PIN_PA9 /* this is the power led */
+#define CONFIG_GREEN_LED AT91_PIN_PA6 /* this is the user led */
+
+#define CONFIG_BOOTDELAY 3
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE 1
+#define CONFIG_BOOTP_BOOTPATH 1
+#define CONFIG_BOOTP_GATEWAY 1
+#define CONFIG_BOOTP_HOSTNAME 1
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+#undef CONFIG_CMD_BDI
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_IMI
+#undef CONFIG_CMD_IMLS
+#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_SOURCE
+
+#define CONFIG_CMD_PING 1
+#define CONFIG_CMD_DHCP 1
+#define CONFIG_CMD_NAND 1
+#define CONFIG_CMD_USB 1
+
+/* SDRAM */
+#define CONFIG_NR_DRAM_BANKS 1
+#define PHYS_SDRAM 0x20000000
+#define PHYS_SDRAM_SIZE 0x04000000 /* 64 megs */
+
+/* DataFlash */
+#define CONFIG_ATMEL_DATAFLASH_SPI
+#define CONFIG_HAS_DATAFLASH 1
+#define CONFIG_SYS_SPI_WRITE_TOUT (5*CONFIG_SYS_HZ)
+#define CONFIG_SYS_MAX_DATAFLASH_BANKS 2
+#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */
+#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1 0xD0000000 /* CS1 */
+#define AT91_SPI_CLK 15000000
+#define DATAFLASH_TCSS (0x1a << 16)
+#define DATAFLASH_TCHS (0x1 << 24)
+
+/* NAND flash */
+#ifdef CONFIG_CMD_NAND
+#define CONFIG_NAND_ATMEL
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+#define CONFIG_SYS_NAND_BASE 0x40000000
+#define CONFIG_SYS_NAND_DBW_8 1
+/* our ALE is AD21 */
+#define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
+/* our CLE is AD22 */
+#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
+#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14
+#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC13
+#endif
+
+/* NOR flash - no real flash on this board */
+#define CONFIG_SYS_NO_FLASH 1
+
+/* Ethernet */
+#define CONFIG_MACB 1
+#undef CONFIG_RMII
+#define CONFIG_NET_MULTI 1
+#define CONFIG_NET_RETRY_COUNT 20
+
+/* USB */
+#define CONFIG_USB_ATMEL
+#define CONFIG_USB_OHCI_NEW 1
+#define CONFIG_DOS_PARTITION 1
+#define CONFIG_SYS_USB_OHCI_CPU_INIT 1
+#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00500000
+#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9260"
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
+#define CONFIG_USB_STORAGE 1
+#define CONFIG_CMD_FAT 1
+
+#define CONFIG_SYS_LOAD_ADDR 0x22000000
+
+#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
+#define CONFIG_SYS_MEMTEST_END 0x23e00000
+
+#ifdef CONFIG_SYS_USE_DATAFLASH_CS0
+
+/* bootstrap + u-boot + env + linux in dataflash on CS0 */
+#define CONFIG_ENV_IS_IN_DATAFLASH 1
+#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400)
+#define CONFIG_ENV_OFFSET 0x4200
+#define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET)
+#define CONFIG_ENV_SIZE 0x4200
+#define CONFIG_BOOTCOMMAND "cp.b 0xC0042000 0x22000000 0x210000; bootm"
+#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
+ "root=/dev/mtdblock0 " \
+ "mtdparts=at91_nand:-(root) " \
+ "rw rootfstype=jffs2"
+
+#elif CONFIG_SYS_USE_DATAFLASH_CS1
+
+/* bootstrap + u-boot + env + linux in dataflash on CS1 */
+#define CONFIG_ENV_IS_IN_DATAFLASH 1
+#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1 + 0x8400)
+#define CONFIG_ENV_OFFSET 0x4200
+#define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1 + CONFIG_ENV_OFFSET)
+#define CONFIG_ENV_SIZE 0x4200
+#define CONFIG_BOOTCOMMAND "cp.b 0xD0042000 0x22000000 0x210000; bootm"
+#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
+ "root=/dev/mtdblock0 " \
+ "mtdparts=at91_nand:-(root) " \
+ "rw rootfstype=jffs2"
+
+#else /* CONFIG_SYS_USE_NANDFLASH */
+
+/* bootstrap + u-boot + env + linux in nandflash */
+#define CONFIG_ENV_IS_IN_NAND 1
+#define CONFIG_ENV_OFFSET 0x60000
+#define CONFIG_ENV_OFFSET_REDUND 0x80000
+#define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */
+#define CONFIG_BOOTCOMMAND "nand read 0x22000000 0xA0000 0x200000; bootm"
+#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
+ "root=/dev/mtdblock5 " \
+ "mtdparts=at91_nand:128k(bootstrap)ro," \
+ "256k(uboot)ro,128k(env1)ro," \
+ "128k(env2)ro,2M(linux),-(root) " \
+ "rw rootfstype=jffs2"
+
+#endif
+
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 }
+
+#define CONFIG_SYS_PROMPT "U-Boot> "
+#define CONFIG_SYS_CBSIZE 256
+#define CONFIG_SYS_MAXARGS 16
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_LONGHELP 1
+#define CONFIG_CMDLINE_EDITING 1
+
+#define ROUND(A, B) (((A) + (B)) & ~((B) - 1))
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
+#define CONFIG_SYS_GBL_DATA_SIZE 128 /* 128 bytes for initial data */
+
+#define CONFIG_STACKSIZE (32*1024) /* regular stack */
+
+#ifdef CONFIG_USE_IRQ
+#error CONFIG_USE_IRQ not supported
+#endif
+
+#endif
--
1.5.6.1
^ permalink raw reply related [flat|nested] 5+ messages in thread