[U-Boot] CONFIG_API, EABI and raise()

[Stefan Roese <sr@denx.de>]

Hi Rafal,

On Thursday 16 July 2009 10:37:34 Rafal Jaworowski wrote:
> On 2009-07-15, at 18:09, Mike Frysinger wrote:
> > On Wednesday 15 July 2009 11:15:46 Rafal Jaworowski wrote:
> >> On 2009-07-15, at 16:58, Mike Frysinger wrote:
> >>> On Tuesday 14 July 2009 09:47:26 Piotr Zi?cik wrote:
> >>>> While working on U-Boot for our board we have found problem related
> >>>> to CONFIG_API option. In general, enabling it causes build failure.
> >>>> Our tests showed that problem exists also on other ARM U-Boot
> >>>> targets
> >>>> (for example davinci_dvevm).
> >>>>
> >>>> Do you think that this problem may be caused by your libgcc-related
> >>>> cleanups ? If so, do you have any idea how to fix it ?
> >>>
> >>> sounds more like it's always been a bug, but Jean's cleanup will fix
> >>> it eventually
> >>
> >> CONFIG_API worked fine for ARM builds some time ago, and this
> >> breakage
> >> seems like a recent development.
> >
> > or, it still works fine if your toolchain doesnt suck and isnt broken
>
> The toolchain is ELDK 4.2 and has worked fine for longer time.

Just to make it clear: The libgcc removal patches for ARM from Jean-Christophe 
are not added yet. So if you see a problem with EABI etc, some other patches 
have to be the reason for this. And very likely Jean-Christophe's patches 
could fix the problems.

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================