From mboxrd@z Thu Jan  1 00:00:00 1970
From: Wolfgang Denk <wd@denx.de>
Date: Sat, 18 Jul 2009 22:35:33 +0200
Subject: [U-Boot] [PATCH 1/2] Add support for Eukrea CPU9260 SBC
In-Reply-To: <1247948834-30856-1-git-send-email-eric@eukrea.com>
References: <20090718152124.GE30699@game.jcrosoft.org>
	<1247948834-30856-1-git-send-email-eric@eukrea.com>
Message-ID: <20090718203533.0F7CE832E416@gemini.denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Dear Eric Benard,

In message <1247948834-30856-1-git-send-email-eric@eukrea.com> you wrote:
> CPUAT91 is built around Atmel's AT91SAM9260 and has up to 64MB of NOR
> flash, up to 128MB of SDRAM, up to 2GB of NAND and includes a 10/100
> Ethernet PHY in RMII mode.
> 
...
> --- a/Makefile
> +++ b/Makefile
> @@ -2813,6 +2813,19 @@ at91sam9rlek_config	:	unconfig
>  	fi;
>  	@$(MKCONFIG) -a at91sam9rlek arm arm926ejs at91sam9rlek atmel at91
>  
> +cpu9260_64m_config \
> +cpu9260_config	:	unconfig
> +	@$(MKCONFIG) -a cpu9260 arm arm926ejs cpu9260 eukrea at91
> +	@if [ "$(findstring _64m,$@)" ] ; then \
> +		echo "#define CONFIG_SYS_SDRC_CR_VAL CONFIG_SYS_SDRC_CR_VAL_64MB" \
> +			>>$(obj)include/config.h ; \
> +		$(XECHO) "... with 64MB SDRAM" ; \
> +	else \
> +		echo "#define CONFIG_SYS_SDRC_CR_VAL CONFIG_SYS_SDRC_CR_VAL_128MB" \
> +			>>$(obj)include/config.h ; \
> +		$(XECHO) "... with 128MB SDRAM" ; \
> +	fi;

This makes no sense to me. "mkconfig  -a"  (i.  e.  in  append  mode)
should  be  used AFTER manually initializing the config files. Either
omit the "-a", or move the line down.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Drawing on my fine command of language, I said nothing.