[U-Boot] [PATCH 00/14] XPedite1K updates

[Stefan Roese <sr@denx.de>]

On Saturday 18 July 2009 02:01:02 Peter Tyser wrote:
> The XPedite1000 is a 440gx-based PMC made by X-ES.  Support was added
> for XPedite100 to U-Boot > 5 years ago by Travis Sawyer
> (travis.sawyer at sandburst.com) independent of X-ES.  Sandburst was
> bought out by Broadcom some time ago.  I attempted to contact
> Travis at both his old Sandburst and Broadcom email addresses
> but neither account still exist.
>
> We never sold any XPedite1000's to Sandburst, so I'm not quite sure
> how Travis initially got his hands on one (ebay?).  In any case,
> now that other X-ES products are supported by U-Boot I thought
> it would make sense to sync up the XPedite1000 with other X-ES
> boards.  In my opinion, these changes add some functionality and
> are generally an improvement.  No one is currently using U-Boot
> on the XPedite1000 that I'm aware of so I hope the changes don't
> affect others in a negative way.
>
> In any case, I was hoping to take over maintainership for the board,
> but was never able to get the OK from Travis.  I hope this is OK...

It's ok with me.

> Peter Tyser (14):
>   xpedite1k: Use standard CFI flash driver
>   xpedite1k: Remove CONFIG_SYS_DRAM_TEST support
>   xpedite1k: Remove support for fixed SDRAM configuration
>   xpedite1k: Remove support for reading MACs from EEPROM
>   xpedite1k: Cleanup coding style
>   xpedite1k: Add support for optional flashes
>   xpedite1k: Add support for additional GPIO pins
>   xpedite1k: Store environment in flash
>   xpedite1k: Disable unused ethernet port 1
>   xpedite1k: Sync up commands and environment with other X-ES boards
>   xpedite1k: Sync organization of board config with other X-ES boards
>   xpedite1k: Sync up board config options with other X-ES boards
>   xpedite1k: Sync checkboard() with other X-ES boards
>   xpedite1k: Move to X-ES vendor directory

All 14 patches applied to ppc4xx. Thanks.

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================