[U-Boot] [PATCH] Add some second source legacy flash chips 256x8

[Stefan Roese <sr@denx.de>]

On Wednesday 22 July 2009 08:41:49 Niklaus Giger wrote:
> Signed-off-by: Niklaus Giger <niklaus.giger@member.fsf.org>

Apart from Wolfgang's comments, please find some minor coding style comments 
below.

> We tested some boot flashes as possible second source.
> As some had ids above 0x7f, we had to implement JEDEC JEP106Z in
> cfi_flash.c. I now that I just missed the merge window, but the patches are
> not urgent and I was away for a three week
>
>  drivers/mtd/cfi_flash.c   |   16 +++++++++--
>  drivers/mtd/jedec_flash.c |   67
> +++++++++++++++++++++++++++++++++++++++++++++ include/flash.h           |  
> 10 ++++++-
>  3 files changed, 89 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c
> index 81ac5d3..4cd0116 100644
> --- a/drivers/mtd/cfi_flash.c
> +++ b/drivers/mtd/cfi_flash.c
> @@ -106,6 +106,8 @@
>  #define ATM_CMD_SOFTLOCK_START		0x80
>  #define ATM_CMD_LOCK_SECT		0x40
>
> +#define FLASH_CONTINUATION_CODE         0x7F
> +
>  #define FLASH_OFFSET_MANUFACTURER_ID	0x00
>  #define FLASH_OFFSET_DEVICE_ID		0x01
>  #define FLASH_OFFSET_DEVICE_ID2		0x0E
> @@ -1541,13 +1543,21 @@ static int cmdset_intel_init(flash_info_t *info,
> struct cfi_qry *qry)
>
>  static void cmdset_amd_read_jedec_ids(flash_info_t *info)
>  {
> -	flash_write_cmd(info, 0, 0, AMD_CMD_RESET);
> +	ushort bankId = 0;
> +	uchar  manuId;
> +
> +        flash_write_cmd(info, 0, 0, AMD_CMD_RESET);
>  	flash_unlock_seq(info, 0);
>  	flash_write_cmd(info, 0, info->addr_unlock1, FLASH_CMD_READ_ID);
>  	udelay(1000); /* some flash are slow to respond */
>
> -	info->manufacturer_id = flash_read_uchar (info,
> -					FLASH_OFFSET_MANUFACTURER_ID);
> +	manuId = flash_read_uchar (info, FLASH_OFFSET_MANUFACTURER_ID);
> +	/* JEDEC JEP106Z specifies ID codes up to bank 7 */
> +	while(manuId == FLASH_CONTINUATION_CODE && bankId < 0x800) {

Space before "(".

Thanks.

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office@denx.de
=====================================================================