[U-Boot] [PATCH V5] ppc4xx: Add 405EP based PMC405DE board

[Matthias Fuchs <matthias.fuchs@esd.eu>]

On Wednesday 22 July 2009 09:36, Stefan Roese wrote:
> Hi Wolfgang,
> 
> On Wednesday 22 July 2009 09:26:09 Wolfgang Denk wrote:
> > > +struct ppc4xx_config ppc4xx_config_val[] = {
> > > +
> > > +	{ "133", "CPU: 133 PLB: 133 OPB: 66 EBC: 44 PCI: 44/66",
> > > +	  { 0x19, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> > > +	    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> > > +	    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> > > +	    0x00, 0x40, 0x12, 0x12, 0x42, 0x3e, 0x00, 0x00 } },
> > > +	{ "266", "CPU: 266 PLB: 133 OPB: 66 EBC: 44 PCI: 44/66",
> > > +	  { 0x19, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> > > +	    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> > > +	    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> > > +	    0x00, 0x50, 0x22, 0x2d, 0x42, 0x3e, 0x00, 0x00 } },
> > > +	{ "333", "CPU: 333 PLB: 111 OPB: 55 EBC: 55 PCI: 55/111",
> > > +	  { 0x19, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> > > +	    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> > > +	    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> > > +	    0x00, 0x60, 0x29, 0x2d, 0x42, 0xbe, 0x00, 0x00 } },
> > > +};
> >
> > Indentation by TAB , please.
> 
> I don't see a problem here. The code is aligned to the lines above via spaces 
> (< 8 spaces). Example:
> 
> 	  { 0x19, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> 	    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
>             ^^^^
> 
> The "0x00" is aligned using two spaces to the "0x19" above. Nothing wrong with 
> it.
Yes, I think the identation is correct also. The only think that might be improved
is one empty line that might be too much. And the spaces before and after the curly braces.

These all should not be a reason for stopping this patch. Please let it make it's 
way into Stefan's repo.

Matthias
> 
> Best regards,
> Stefan
> 
> =====================================================================
> DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
> =====================================================================
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
> 
> 

-- 
-------------------------------------------------------------------------
Dipl.-Ing. Matthias Fuchs
Head of System Design

esd electronic system design gmbh
Vahrenwalder Str. 207 - 30165 Hannover - GERMANY
Phone: +49-511-37298-0 - Fax: +49-511-37298-68
Please visit our homepage http://www.esd.eu
Quality Products - Made in Germany
-------------------------------------------------------------------------
Gesch?ftsf?hrer: Klaus Detering, Dr. Werner Schulze
Amtsgericht Hannover HRB 51373 - VAT-ID DE 115672832
-------------------------------------------------------------------------