From mboxrd@z Thu Jan  1 00:00:00 1970
From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date: Wed, 22 Jul 2009 23:37:13 +0200
Subject: [U-Boot] [PATCH] imx27lite: add support for imx27lite board
	from LogicPD
In-Reply-To: <1247828401-9515-1-git-send-email-yanok@emcraft.com>
References: <20090621112124.GH22845@game.jcrosoft.org>
	<1247828401-9515-1-git-send-email-yanok@emcraft.com>
Message-ID: <20090722213713.GG5890@game.jcrosoft.org>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

> + */
> +
> +#include <common.h>
> +#include <asm/io.h>
> +#include <asm/arch/imx-regs.h>
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +static int imx27lite_devices_init(void)
> +{
> +	struct gpio_regs *regs = (struct gpio_regs *)IMX_GPIO_BASE;
> +	int i;
> +	unsigned int mode[] = {
> +		PD0_AIN_FEC_TXD0,
> +		PD1_AIN_FEC_TXD1,
> +		PD2_AIN_FEC_TXD2,
> +		PD3_AIN_FEC_TXD3,
> +		PD4_AOUT_FEC_RX_ER,
> +		PD5_AOUT_FEC_RXD1,
> +		PD6_AOUT_FEC_RXD2,
> +		PD7_AOUT_FEC_RXD3,
> +		PD8_AF_FEC_MDIO,
> +		PD9_AIN_FEC_MDC | GPIO_PUEN,
> +		PD10_AOUT_FEC_CRS,
> +		PD11_AOUT_FEC_TX_CLK,
> +		PD12_AOUT_FEC_RXD0,
> +		PD13_AOUT_FEC_RX_DV,
> +		PD14_AOUT_FEC_CLR,
> +		PD15_AOUT_FEC_COL,
> +		PD16_AIN_FEC_TX_ER,
> +		PF23_AIN_FEC_TX_EN,
> +		PE12_PF_UART1_TXD,
> +		PE13_PF_UART1_RXD,
> +		PB4_PF_SD2_D0,
> +		PB5_PF_SD2_D1,
> +		PB6_PF_SD2_D2,
> +		PB7_PF_SD2_D3,
> +		PB8_PF_SD2_CMD,
> +		PB9_PF_SD2_CLK,
> +		(GPIO_PORTC | GPIO_OUT | GPIO_PUEN | GPIO_GPIO | 31),
> +	};
> +
> +	for (i = 0; i < ARRAY_SIZE(mode); i++)
> +		imx_gpio_mode(mode[i]);
you do not answer about my api comment?
do you plan to create one for device init?

otherwise ok

Best Regards,
J.