From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefan Roese Date: Fri, 24 Jul 2009 14:07:12 +0200 Subject: [U-Boot] [PATCH v4] ppc4xx: Add GDsys CompactCenter board support. In-Reply-To: <1248427555-29395-1-git-send-email-eibach@gdsys.de> References: <1248427555-29395-1-git-send-email-eibach@gdsys.de> Message-ID: <200907241407.12265.sr@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Dirk, On Friday 24 July 2009 11:25:55 Dirk Eibach wrote: > Changes since v3: > - took nor fixup from canyonlands (This still depends on __ft_board_setup() > working properly, which is not the case yet) I just checked and noticed that this fixup I introduced a while ago for the physical NOR address is not needed any more. Please give this version a try, completely without additional fixup: diff --git a/board/amcc/canyonlands/canyonlands.c b/board/amcc/canyonlands/canyonlands.c index cfc1023..12385bf 100644 --- a/board/amcc/canyonlands/canyonlands.c +++ b/board/amcc/canyonlands/canyonlands.c @@ -579,23 +579,8 @@ extern void __ft_board_setup(void *blob, bd_t *bd); void ft_board_setup(void *blob, bd_t *bd) { - u32 val[4]; - int rc; - __ft_board_setup(blob, bd); - /* Fixup NOR mapping */ - val[0] = CONFIG_SYS_NOR_CS; /* chip select number */ - val[1] = 0; /* always 0 */ - val[2] = CONFIG_SYS_FLASH_BASE_PHYS_L; /* we fixed up this address */ - val[3] = gd->bd->bi_flashsize; - rc = fdt_find_and_setprop(blob, "/plb/opb/ebc", "ranges", - val, sizeof(val), 1); - if (rc) { - printf("Unable to update property NOR mapping, err=%s\n", - fdt_strerror(rc)); - } - if (gd->board_type == BOARD_CANYONLANDS_SATA) { /* * When SATA is selected we need to disable the first PCIe And let me know if this works for you. Thanks. Best regards, Stefan ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de =====================================================================