From: Stefan Roese <sr@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] Please pull u-boot-ppc4xx/master
Date: Tue, 28 Jul 2009 07:29:23 +0200 [thread overview]
Message-ID: <200907280729.23996.sr@denx.de> (raw)
The following changes since commit 10c7604d021949464b1e4ba903df95e6b2f0d2ff:
Wolfgang Denk (1):
Prepare 2009.08-rc1
are available in the git repository at:
git://www.denx.de/git/u-boot-ppc4xx.git master
Dirk Eibach (1):
ppc4xx: Add GDsys CompactCenter board support.
Stefan Roese (4):
ppc4xx: Fix Arches DDR2 initialization
ppc4xx: Kilauea: Fix SDRAM init in NAND booting version
ppc4xx: Add some NAND-booting bootstrap entries to Kilauea chip_config cmd
ppc4xx: Fix problem with NOR range assignment in Canyonlands ft_board_setup
MAINTAINERS | 2 +
MAKEALL | 2 +
Makefile | 8 +
board/amcc/canyonlands/canyonlands.c | 45 ++--
board/amcc/kilauea/chip_config.c | 24 ++-
board/gdsys/compactcenter/Makefile | 53 ++++
board/gdsys/compactcenter/chip_config.c | 87 ++++++
board/gdsys/compactcenter/compactcenter.c | 297 ++++++++++++++++++++
board/gdsys/compactcenter/config.mk | 41 +++
board/gdsys/compactcenter/init.S | 97 +++++++
board/gdsys/compactcenter/u-boot.lds | 144 ++++++++++
include/configs/compactcenter.h | 437 +++++++++++++++++++++++++++++
include/configs/kilauea.h | 2 +
13 files changed, 1208 insertions(+), 31 deletions(-)
create mode 100644 board/gdsys/compactcenter/Makefile
create mode 100644 board/gdsys/compactcenter/chip_config.c
create mode 100644 board/gdsys/compactcenter/compactcenter.c
create mode 100644 board/gdsys/compactcenter/config.mk
create mode 100644 board/gdsys/compactcenter/init.S
create mode 100644 board/gdsys/compactcenter/u-boot.lds
create mode 100644 include/configs/compactcenter.h
next reply other threads:[~2009-07-28 5:29 UTC|newest]
Thread overview: 108+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-07-28 5:29 Stefan Roese [this message]
2009-07-29 7:27 ` [U-Boot] Please pull u-boot-ppc4xx/master Wolfgang Denk
-- strict thread matches above, loose matches on Subject: below --
2009-07-30 12:18 Stefan Roese
2009-07-30 12:32 ` Wolfgang Denk
2009-08-18 7:23 Stefan Roese
2009-08-18 11:58 ` Wolfgang Denk
2009-08-18 17:06 ` Stefan Roese
2009-08-18 19:23 ` Wolfgang Denk
2009-08-25 15:47 Stefan Roese
2009-08-25 20:53 ` Wolfgang Denk
2009-08-26 4:30 ` Stefan Roese
2009-09-28 8:56 Stefan Roese
2009-09-30 21:27 ` Wolfgang Denk
2009-10-02 12:03 Stefan Roese
2009-10-03 21:41 ` Wolfgang Denk
2009-10-07 7:38 Stefan Roese
2009-10-07 22:08 ` Wolfgang Denk
2009-10-23 14:20 Stefan Roese
2009-10-24 20:25 ` Wolfgang Denk
2009-11-09 12:34 Stefan Roese
2009-11-11 22:00 ` Wolfgang Denk
2009-11-17 12:40 Stefan Roese
2009-11-17 21:33 ` Wolfgang Denk
2010-01-21 7:47 Stefan Roese
2010-01-21 21:28 ` Wolfgang Denk
2010-01-23 8:20 Stefan Roese
2010-02-03 9:10 Stefan Roese
2010-02-03 19:23 ` Wolfgang Denk
2010-03-04 9:10 Stefan Roese
2010-03-04 20:29 ` Wolfgang Denk
2010-03-24 13:49 Stefan Roese
2010-03-27 23:03 ` Wolfgang Denk
2010-03-30 11:10 Stefan Roese
2010-03-30 20:21 ` Wolfgang Denk
2010-04-14 8:36 Stefan Roese
2010-04-16 9:22 ` Wolfgang Denk
2010-04-19 13:47 Stefan Roese
2010-04-24 19:18 ` Wolfgang Denk
2010-04-29 8:23 Stefan Roese
2010-04-30 22:44 ` Wolfgang Denk
2010-05-17 9:02 Stefan Roese
2010-05-17 21:15 ` Wolfgang Denk
2010-07-01 8:36 Stefan Roese
2010-07-04 21:39 ` Wolfgang Denk
2010-07-23 8:26 Stefan Roese
2010-07-24 18:41 ` Wolfgang Denk
2010-08-09 14:25 Stefan Roese
2010-08-10 20:53 ` Wolfgang Denk
2010-09-03 9:16 Stefan Roese
2010-09-07 19:54 ` Wolfgang Denk
2010-09-22 8:36 Stefan Roese
2010-09-22 20:56 ` Wolfgang Denk
2010-10-04 9:27 Stefan Roese
2010-10-05 12:37 ` Wolfgang Denk
2010-10-20 8:42 Stefan Roese
2010-10-20 19:21 ` Wolfgang Denk
2010-10-21 4:44 ` Stefan Roese
2010-10-21 6:08 ` Wolfgang Denk
2010-10-21 6:21 ` Stefan Roese
2010-10-25 15:32 Stefan Roese
2010-10-26 18:58 ` Wolfgang Denk
2010-11-28 10:34 Stefan Roese
2010-11-28 16:45 ` Wolfgang Denk
2010-12-15 12:42 Stefan Roese
2010-12-16 21:35 ` Wolfgang Denk
2011-01-11 9:41 Stefan Roese
2011-02-07 10:38 Stefan Roese
2011-02-09 19:54 ` Wolfgang Denk
2011-04-21 9:30 Stefan Roese
2011-04-24 22:58 ` Wolfgang Denk
2011-05-12 14:17 Stefan Roese
2011-05-12 17:28 ` Wolfgang Denk
2011-07-28 17:19 Stefan Roese
2011-08-02 19:52 ` Wolfgang Denk
2011-09-19 12:01 Stefan Roese
2011-09-19 21:19 ` Wolfgang Denk
2011-10-12 9:59 Stefan Roese
2011-10-12 20:46 ` Wolfgang Denk
2011-12-01 8:18 Stefan Roese
2011-12-01 23:04 ` Wolfgang Denk
2012-04-30 13:11 Stefan Roese
2012-04-30 14:57 ` Wolfgang Denk
2012-09-03 9:42 Stefan Roese
2012-09-03 19:19 ` Wolfgang Denk
2012-12-06 14:57 Stefan Roese
2012-12-06 15:44 ` Tom Rini
2013-04-22 8:27 Stefan Roese
2013-04-22 17:51 ` Tom Rini
2013-08-19 8:37 Stefan Roese
2013-08-19 13:40 ` Tom Rini
2013-09-07 7:50 Stefan Roese
2013-09-09 14:56 ` Tom Rini
2014-04-24 11:20 Stefan Roese
2014-04-25 19:45 ` Tom Rini
2014-07-25 9:10 Stefan Roese
2014-07-28 21:48 ` Tom Rini
2014-11-05 9:27 Stefan Roese
2014-11-05 15:59 ` Tom Rini
2014-11-19 8:03 Stefan Roese
2014-11-20 14:17 ` Tom Rini
2015-11-30 11:56 Stefan Roese
2015-11-30 20:17 ` Tom Rini
2016-03-21 8:44 Stefan Roese
2016-03-22 14:55 ` Tom Rini
2016-08-09 7:31 Stefan Roese
2016-08-10 0:45 ` Tom Rini
2016-09-27 16:27 Stefan Roese
2016-09-27 21:34 ` Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200907280729.23996.sr@denx.de \
--to=sr@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox