[U-Boot] Please pull u-boot-i2c.git updated v2

[Wolfgang Denk <wd@denx.de>]

Dear Heiko Schocher,

In message <4A7003A4.2050605@denx.de> you wrote:
> Hello Wolfgang,
> 
> Heiko Schocher wrote:
> > Wolfgang Denk wrote:
> >> In message <4A6ED511.6010107@denx.de> you wrote:
> >>> Hello Wolfgang,
> >>>
> >>> The following changes since commit 94978e19f31d225b4f7d97c4acbac1ecfaeb8f69:
> >>>   Wolfgang Denk (1):
> >>>         Prepare 2009.08-rc1 (again, after fixing last minute issues).
> >>>
> >>> are available in the git repository at:
> >>>
> >>>   git://git.denx.de/u-boot-i2c.git master
> >>>
> >>> Alessandro Rubini (2):
> >>>       arm nomadik: add gpio support
> >>>       arm nomadik: add i2c
> >>>
> >>> Heiko Schocher (2):
> >>>       arm, i2c: added support for the TWSI I2C Interface
> >>>       Because twl4030 now has its own device files, move exiting
> >> Not pulled again because of this obscure commit.
> > 
> > Hups ... Sorry ... I look for this issue ...
> 
> Here comes the right version ... sorry for the confusion.
> 
> The following changes since commit 94978e19f31d225b4f7d97c4acbac1ecfaeb8f69:
>   Wolfgang Denk (1):
>         Prepare 2009.08-rc1 (again, after fixing last minute issues).
> 
> are available in the git repository at:
> 
>   git://git.denx.de/u-boot-i2c.git master
> 
> Alessandro Rubini (2):
>       arm nomadik: add gpio support
>       arm nomadik: add i2c
> 
> Heiko Schocher (1):
>       arm, i2c: added support for the TWSI I2C Interface
> 
> Tom Rix (6):
>       OMAP I2C Fix the sampling clock.
>       TWL4030 Add initial support
>       TWL4030 Add power reset button
>       OMAP3 Move twl4030 power and led functions
>       OMAP3 Move twl4030 mmc function
>       OMAP3 Remove twl4030 defines
> 
>  Makefile                                       |    1 +
>  board/omap3/beagle/beagle.c                    |    4 +-
>  board/omap3/common/power.c                     |   74 ----
>  board/omap3/overo/overo.c                      |    4 +-
>  board/omap3/pandora/pandora.c                  |    4 +-
>  board/omap3/zoom1/zoom1.c                      |   12 +-
>  board/omap3/zoom2/zoom2.c                      |   17 +-
>  board/st/nhk8815/nhk8815.c                     |   16 +-
>  cpu/arm926ejs/nomadik/Makefile                 |    2 +-
>  cpu/arm926ejs/nomadik/gpio.c                   |   99 +++++
>  drivers/i2c/Makefile                           |    1 +
>  drivers/i2c/kirkwood_i2c.c                     |  484 ++++++++++++++++++++++++
>  drivers/i2c/omap24xx_i2c.c                     |   74 ++++-
>  drivers/misc/Makefile                          |    1 +
>  drivers/misc/twl4030_led.c                     |   52 +++
>  drivers/mmc/omap3_mmc.c                        |   13 +-
>  {board/omap3/common => drivers/power}/Makefile |   25 +-
>  drivers/power/twl4030.c                        |  115 ++++++
>  include/asm-arm/arch-nomadik/gpio.h            |   42 ++
>  include/asm-arm/arch-omap24xx/i2c.h            |   44 +++
>  include/asm-arm/arch-omap3/i2c.h               |   70 +++-
>  include/asm-arm/arch-omap3/omap3.h             |   35 --
>  include/configs/nhk8815.h                      |   18 +-
>  include/configs/omap3_beagle.h                 |    6 +
>  include/configs/omap3_evm.h                    |    5 +
>  include/configs/omap3_overo.h                  |    6 +
>  include/configs/omap3_pandora.h                |    6 +
>  include/configs/omap3_zoom1.h                  |    6 +
>  include/configs/omap3_zoom2.h                  |    6 +
>  include/twl4030.h                              |  401 ++++++++++++++++++++
>  30 files changed, 1484 insertions(+), 159 deletions(-)
>  delete mode 100644 board/omap3/common/power.c
>  create mode 100644 cpu/arm926ejs/nomadik/gpio.c
>  create mode 100644 drivers/i2c/kirkwood_i2c.c
>  create mode 100644 drivers/misc/twl4030_led.c
>  rename {board/omap3/common => drivers/power}/Makefile (67%)
>  create mode 100644 drivers/power/twl4030.c
>  create mode 100644 include/asm-arm/arch-nomadik/gpio.h
>  create mode 100644 include/twl4030.h

Applied, thanks.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
KLB is an acronym for `Known Lazy Bastard', aka non-FAQ  reader,  aka
person  who  would  rather  make  someone  take their time to explain
something basic than look it up in a  FAQ.
         -- Tom Christiansen in <6aq547$mnr$2@csnews.cs.colorado.edu>