* [U-Boot] [PATCH] ppc4xx: Add support for PPC460EX/460GT rev B chip to AMCC Canyonlands
@ 2009-07-29 14:26 Stefan Roese
2009-07-30 12:13 ` Stefan Roese
0 siblings, 1 reply; 2+ messages in thread
From: Stefan Roese @ 2009-07-29 14:26 UTC (permalink / raw)
To: u-boot
This patch is based on a diff created by Phong Vo from AMCC.
Signed-off-by: Phong Vo <pvo@amcc.com>
Signed-off-by: Stefan Roese <sr@denx.de>
---
board/amcc/canyonlands/canyonlands.c | 26 +++++++++++++++++---------
1 files changed, 17 insertions(+), 9 deletions(-)
diff --git a/board/amcc/canyonlands/canyonlands.c b/board/amcc/canyonlands/canyonlands.c
index 5071c8d..710a0af 100644
--- a/board/amcc/canyonlands/canyonlands.c
+++ b/board/amcc/canyonlands/canyonlands.c
@@ -94,13 +94,23 @@ static inline void board_cpld_write(int offset, int data)
out_8((void *)(CONFIG_SYS_CPLD_ADDR), offset);
out_8((void *)(CONFIG_SYS_CPLD_DATA), data);
}
+#else
+static int pvr_460ex(void)
+{
+ u32 pvr = get_pvr();
+
+ if ((pvr == PVR_460EX_RA) || (pvr == PVR_460EX_SE_RA) ||
+ (pvr == PVR_460EX_RB))
+ return 1;
+
+ return 0;
+}
#endif /* defined(CONFIG_ARCHES) */
int board_early_init_f(void)
{
#if !defined(CONFIG_ARCHES)
u32 sdr0_cust0;
- u32 pvr = get_pvr();
#endif
/*
@@ -175,7 +185,7 @@ int board_early_init_f(void)
mtdcr(AHB_TOP, 0x8000004B);
mtdcr(AHB_BOT, 0x8000004B);
- if ((pvr == PVR_460EX_RA) || (pvr == PVR_460EX_SE_RA)) {
+ if (pvr_460ex()) {
/*
* Configure USB-STP pins as alternate and not GPIO
* It seems to be neccessary to configure the STP pins as GPIO
@@ -234,17 +244,16 @@ int get_cpu_num(void)
int checkboard(void)
{
char *s = getenv("serial#");
- u32 pvr = get_pvr();
- if ((pvr == PVR_460GT_RA) || (pvr == PVR_460GT_SE_RA)) {
- printf("Board: Glacier - AMCC PPC460GT Evaluation Board");
- gd->board_type = BOARD_GLACIER;
- } else {
+ if (pvr_460ex()) {
printf("Board: Canyonlands - AMCC PPC460EX Evaluation Board");
if (in_8((void *)(CONFIG_SYS_BCSR_BASE + 3)) & CONFIG_SYS_BCSR3_PCIE)
gd->board_type = BOARD_CANYONLANDS_PCIE;
else
gd->board_type = BOARD_CANYONLANDS_SATA;
+ } else {
+ printf("Board: Glacier - AMCC PPC460GT Evaluation Board");
+ gd->board_type = BOARD_GLACIER;
}
switch (gd->board_type) {
@@ -498,7 +507,6 @@ int misc_init_r(void)
{
u32 sdr0_srst1 = 0;
u32 eth_cfg;
- u32 pvr = get_pvr();
u8 val;
/*
@@ -513,7 +521,7 @@ int misc_init_r(void)
/* Set the for 2 RGMII mode */
/* GMC0 EMAC4_0, GMC0 EMAC4_1, RGMII Bridge 0 */
eth_cfg &= ~SDR0_ETH_CFG_GMC0_BRIDGE_SEL;
- if ((pvr == PVR_460EX_RA) || (pvr == PVR_460EX_SE_RA))
+ if (pvr_460ex())
eth_cfg |= SDR0_ETH_CFG_GMC1_BRIDGE_SEL;
else
eth_cfg &= ~SDR0_ETH_CFG_GMC1_BRIDGE_SEL;
--
1.6.3.4
^ permalink raw reply related [flat|nested] 2+ messages in thread
* [U-Boot] [PATCH] ppc4xx: Add support for PPC460EX/460GT rev B chip to AMCC Canyonlands
2009-07-29 14:26 [U-Boot] [PATCH] ppc4xx: Add support for PPC460EX/460GT rev B chip to AMCC Canyonlands Stefan Roese
@ 2009-07-30 12:13 ` Stefan Roese
0 siblings, 0 replies; 2+ messages in thread
From: Stefan Roese @ 2009-07-30 12:13 UTC (permalink / raw)
To: u-boot
On Wednesday 29 July 2009 16:26:11 Stefan Roese wrote:
> This patch is based on a diff created by Phong Vo from AMCC.
>
> Signed-off-by: Phong Vo <pvo@amcc.com>
> Signed-off-by: Stefan Roese <sr@denx.de>
Applied to u-boot-ppc4xx/master. Thanks.
Best regards,
Stefan
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2009-07-30 12:13 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-07-29 14:26 [U-Boot] [PATCH] ppc4xx: Add support for PPC460EX/460GT rev B chip to AMCC Canyonlands Stefan Roese
2009-07-30 12:13 ` Stefan Roese
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox