[U-Boot] [PATCH 2/2] Support for the Calao TNY-A9260/TNY-A9G20 boards

[Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>]

On 12:37 Fri 07 Aug     , Albin Tonnerre wrote:
> The Calao TNY-A9260 and TNY-9G20 are boards manufactured and sold by
> Calao Systems <http://www.calao-systems.com>. Their components are very
> similar to the AT91SAM9260EK board, so their configuration is based on
> the configuration of this board. There are however some differences:
> different clocks, no LCD, no ethernet. They also can use SPI EEPROM to
> store the environment.
> 
> Signed-off-by: Albin Tonnerre <albin.tonnerre@free-electrons.com>
> ---
>  MAINTAINERS                              |    4 +
>  MAKEALL                                  |    1 +
>  Makefile                                 |   19 ++++
>  board/calao/tny_a9260/Makefile           |   55 ++++++++++
>  board/calao/tny_a9260/config.mk          |    1 +
>  board/calao/tny_a9260/spi.c              |   50 +++++++++
>  board/calao/tny_a9260/tny_a9260.c        |  110 ++++++++++++++++++++
>  cpu/arm926ejs/at91/at91sam9260_devices.c |    2 +-
>  include/configs/tny_a9260.h              |  164 ++++++++++++++++++++++++++++++
>  9 files changed, 405 insertions(+), 1 deletions(-)
>  create mode 100644 board/calao/tny_a9260/Makefile
>  create mode 100644 board/calao/tny_a9260/config.mk
>  create mode 100644 board/calao/tny_a9260/spi.c
>  create mode 100644 board/calao/tny_a9260/tny_a9260.c
>  create mode 100644 include/configs/tny_a9260.h
> 
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

Best Regards,
J.