[U-Boot] [PATCH 1/1][Net] Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API

[Wolfgang Denk <wd@denx.de>]

Dear Ben Warren,

I wrote:

> Note however that your modification was probably not the (only)
> culprit. With current mainline version I get this:
> 
> TRAB # run load
> TFTP from server 192.168.1.1; our IP address is 192.168.3.68
> Filename 'trab/u-boot.bin-wd'.
> Load address: 0xc100000
> Loading: T T T T T T T T T T 
> Retry count exceeded; starting again
> TFTP from server 192.168.1.1; our IP address is 192.168.3.68
> Filename 'trab/u-boot.bin-wd'.
> Load address: 0xc100000
> Loading: T T T T T T T T T T 
> Retry count exceeded; starting again
> TFTP from server 192.168.1.1; our IP address is 192.168.3.68
> Filename 'trab/u-boot.bin-wd'.
> Load address: 0xc100000
> Loading: T T T T T T T T T T 
> Retry count exceeded; starting again
> 
> with the timeouts being *way* too fast.
> 
> It seems that 1.2.0 was the last version that has been actually
> tested on trab / SMDK2400.
> 
> I'll try to run a git bisect tomorrow; need to get some sleep now.

Please ignore me:

U-Boot 2009.08-rc2-00016-g253cb83-dirty (Aug 13 2009 - 00:42:59)

I2C:   ready
DRAM:  32 MB
Flash:  8 MB
USB:   scanning bus for devices... 1 USB Device(s) found
0 Storage Device(s) found

Enter password - autoboot in 5 sec...
TRAB # run load
TFTP from server 192.168.1.1; our IP address is 192.168.3.68
Filename 'trab/u-boot.bin-wd'.
Load address: 0xc100000
Loading: ################
done
Bytes transferred = 233844 (39174 hex)
TRAB # 

So currrent mainline *is* working fine.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Any sufficiently advanced  technology  is  indistinguishable  from  a
rigged demo.                              - Andy Finkel, computer guy