From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefan Roese Date: Fri, 14 Aug 2009 18:26:58 +0200 Subject: [U-Boot] How do you print/view avaliable devices? In-Reply-To: <24974056.post@talk.nabble.com> References: <24943649.post@talk.nabble.com> <24974056.post@talk.nabble.com> Message-ID: <200908141826.58534.sr@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Friday 14 August 2009 17:56:07 dbrazeau wrote: > I working on the Katmai board. I'm trying to run a program in the 16MB > boot flash. The user manual states the U-boot command to load Kozio > diagnostics program is: > => fatload xsa 0x1000000 /mnt-xsa/kdiags.katmai.img That's not boot flash but most likely a CompactFlash connected via the SystemACE. You should use "ace" instead of "xsa" here. Perhaps this will work. Cheers, Stefan -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-0 Fax: (+49)-8142-66989-80 Email: office at denx.de