* [U-Boot] [PATCH 5/7] mpc85xx: Setup QE pinmux for SPI Flash on MPC8569E-MDS boards
@ 2009-08-19 18:37 Anton Vorontsov
0 siblings, 0 replies; 3+ messages in thread
From: Anton Vorontsov @ 2009-08-19 18:37 UTC (permalink / raw)
To: u-boot
SPI Flash (M25P40) is connected to the SPI1 bus, we need a few
qe_iop entries to actually enable SPI1 on these boards.
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
---
board/freescale/mpc8569mds/mpc8569mds.c | 6 ++++++
1 files changed, 6 insertions(+), 0 deletions(-)
diff --git a/board/freescale/mpc8569mds/mpc8569mds.c b/board/freescale/mpc8569mds/mpc8569mds.c
index 7c1aaa5..55e5073 100644
--- a/board/freescale/mpc8569mds/mpc8569mds.c
+++ b/board/freescale/mpc8569mds/mpc8569mds.c
@@ -154,6 +154,12 @@ const qe_iop_conf_t qe_iop_conf_tab[] = {
{5, 10, 2, 0, 3}, /* UART1_CTS_B */
{5, 11, 1, 0, 2}, /* UART1_RTS_B */
+ /* SPI Flash, M25P40 */
+ {4, 27, 3, 0, 1}, /* SPI_MOSI */
+ {4, 28, 3, 0, 1}, /* SPI_MISO */
+ {4, 29, 3, 0, 1}, /* SPI_CLK */
+ {4, 30, 1, 0, 0}, /* SPI_SEL, GPIO */
+
{0, 0, 0, 0, QE_IOP_TAB_END} /* END of table */
};
--
1.6.3.3
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [U-Boot] [PATCH 5/7] mpc85xx: Setup QE pinmux for SPI Flash on MPC8569E-MDS boards
2009-10-15 13:46 [U-Boot] [PATCH 0/7] Some patches for MPC8569E-MDS Anton Vorontsov
@ 2009-10-15 13:47 ` Anton Vorontsov
2009-10-27 15:10 ` Kumar Gala
0 siblings, 1 reply; 3+ messages in thread
From: Anton Vorontsov @ 2009-10-15 13:47 UTC (permalink / raw)
To: u-boot
SPI Flash (M25P40) is connected to the SPI1 bus, we need a few
qe_iop entries to actually enable SPI1 on these boards.
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
---
board/freescale/mpc8569mds/mpc8569mds.c | 6 ++++++
1 files changed, 6 insertions(+), 0 deletions(-)
diff --git a/board/freescale/mpc8569mds/mpc8569mds.c b/board/freescale/mpc8569mds/mpc8569mds.c
index 2d07922..7d1d02e 100644
--- a/board/freescale/mpc8569mds/mpc8569mds.c
+++ b/board/freescale/mpc8569mds/mpc8569mds.c
@@ -154,6 +154,12 @@ const qe_iop_conf_t qe_iop_conf_tab[] = {
{5, 10, 2, 0, 3}, /* UART1_CTS_B */
{5, 11, 1, 0, 2}, /* UART1_RTS_B */
+ /* SPI Flash, M25P40 */
+ {4, 27, 3, 0, 1}, /* SPI_MOSI */
+ {4, 28, 3, 0, 1}, /* SPI_MISO */
+ {4, 29, 3, 0, 1}, /* SPI_CLK */
+ {4, 30, 1, 0, 0}, /* SPI_SEL, GPIO */
+
{0, 0, 0, 0, QE_IOP_TAB_END} /* END of table */
};
--
1.6.3.3
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [U-Boot] [PATCH 5/7] mpc85xx: Setup QE pinmux for SPI Flash on MPC8569E-MDS boards
2009-10-15 13:47 ` [U-Boot] [PATCH 5/7] mpc85xx: Setup QE pinmux for SPI Flash on MPC8569E-MDS boards Anton Vorontsov
@ 2009-10-27 15:10 ` Kumar Gala
0 siblings, 0 replies; 3+ messages in thread
From: Kumar Gala @ 2009-10-27 15:10 UTC (permalink / raw)
To: u-boot
On Oct 15, 2009, at 8:47 AM, Anton Vorontsov wrote:
> SPI Flash (M25P40) is connected to the SPI1 bus, we need a few
> qe_iop entries to actually enable SPI1 on these boards.
>
> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
> ---
> board/freescale/mpc8569mds/mpc8569mds.c | 6 ++++++
> 1 files changed, 6 insertions(+), 0 deletions(-)
applied to 85xx
- k
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2009-10-27 15:10 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-08-19 18:37 [U-Boot] [PATCH 5/7] mpc85xx: Setup QE pinmux for SPI Flash on MPC8569E-MDS boards Anton Vorontsov
-- strict thread matches above, loose matches on Subject: below --
2009-10-15 13:46 [U-Boot] [PATCH 0/7] Some patches for MPC8569E-MDS Anton Vorontsov
2009-10-15 13:47 ` [U-Boot] [PATCH 5/7] mpc85xx: Setup QE pinmux for SPI Flash on MPC8569E-MDS boards Anton Vorontsov
2009-10-27 15:10 ` Kumar Gala
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox