* [U-Boot] [PATCH] ARM: DaVinci: DaVinci DM365 SOC specific code
@ 2009-08-15 15:20 s-paulraj at ti.com
2009-08-17 22:01 ` Jean-Christophe PLAGNIOL-VILLARD
0 siblings, 1 reply; 6+ messages in thread
From: s-paulraj at ti.com @ 2009-08-15 15:20 UTC (permalink / raw)
To: u-boot
From: Sandeep Paulraj <s-paulraj@ti.com>
This patch adds support for DaVinci DM365 SOC.
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
---
cpu/arm926ejs/davinci/Makefile | 1 +
cpu/arm926ejs/davinci/dm365.c | 35 +++++++++++++++++++++++++++++++++++
2 files changed, 36 insertions(+), 0 deletions(-)
create mode 100644 cpu/arm926ejs/davinci/dm365.c
diff --git a/cpu/arm926ejs/davinci/Makefile b/cpu/arm926ejs/davinci/Makefile
index e45ad25..7501a85 100644
--- a/cpu/arm926ejs/davinci/Makefile
+++ b/cpu/arm926ejs/davinci/Makefile
@@ -29,6 +29,7 @@ LIB = $(obj)lib$(SOC).a
COBJS-y += cpu.o timer.o psc.o
COBJS-$(CONFIG_SOC_DM355) += dm355.o
+COBJS-$(CONFIG_SOC_DM365) += dm365.o
COBJS-$(CONFIG_SOC_DM644X) += dm644x.o
COBJS-$(CONFIG_DRIVER_TI_EMAC) += lxt972.o dp83848.o
diff --git a/cpu/arm926ejs/davinci/dm365.c b/cpu/arm926ejs/davinci/dm365.c
new file mode 100644
index 0000000..56c1bc0
--- /dev/null
+++ b/cpu/arm926ejs/davinci/dm365.c
@@ -0,0 +1,35 @@
+/*
+ * SoC-specific code for tms320dm365 and similar chips
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <common.h>
+#include <asm/arch/hardware.h>
+
+void davinci_enable_uart0(void)
+{
+ lpsc_on(DAVINCI_LPSC_UART0);
+}
+
+#ifdef CONFIG_DRIVER_DAVINCI_I2C
+void davinci_enable_i2c(void)
+{
+ lpsc_on(DAVINCI_LPSC_I2C);
+}
+#endif
--
1.6.0.4
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [U-Boot] [PATCH] ARM: DaVinci: DaVinci DM365 SOC specific code
2009-08-15 15:20 [U-Boot] [PATCH] ARM: DaVinci: DaVinci DM365 SOC specific code s-paulraj at ti.com
@ 2009-08-17 22:01 ` Jean-Christophe PLAGNIOL-VILLARD
2009-08-18 15:21 ` John Rigby
0 siblings, 1 reply; 6+ messages in thread
From: Jean-Christophe PLAGNIOL-VILLARD @ 2009-08-17 22:01 UTC (permalink / raw)
To: u-boot
On 11:20 Sat 15 Aug , s-paulraj at ti.com wrote:
> From: Sandeep Paulraj <s-paulraj@ti.com>
>
> This patch adds support for DaVinci DM365 SOC.
>
> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
> ---
> cpu/arm926ejs/davinci/Makefile | 1 +
> cpu/arm926ejs/davinci/dm365.c | 35 +++++++++++++++++++++++++++++++++++
> 2 files changed, 36 insertions(+), 0 deletions(-)
> create mode 100644 cpu/arm926ejs/davinci/dm365.c
apply to u-boot-arm next
Best Regards,
J.
^ permalink raw reply [flat|nested] 6+ messages in thread
* [U-Boot] [PATCH] ARM: DaVinci: DaVinci DM365 SOC specific code
2009-08-17 22:01 ` Jean-Christophe PLAGNIOL-VILLARD
@ 2009-08-18 15:21 ` John Rigby
2009-08-18 15:24 ` Paulraj, Sandeep
0 siblings, 1 reply; 6+ messages in thread
From: John Rigby @ 2009-08-18 15:21 UTC (permalink / raw)
To: u-boot
I don't see a next branch in u-boot-arm. Am I missing something?
Thanks
John
On Mon, Aug 17, 2009 at 4:01 PM, Jean-Christophe PLAGNIOL-VILLARD <
plagnioj@jcrosoft.com> wrote:
> On 11:20 Sat 15 Aug , s-paulraj at ti.com wrote:
> > From: Sandeep Paulraj <s-paulraj@ti.com>
> >
> > This patch adds support for DaVinci DM365 SOC.
> >
> > Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
> > ---
> > cpu/arm926ejs/davinci/Makefile | 1 +
> > cpu/arm926ejs/davinci/dm365.c | 35
> +++++++++++++++++++++++++++++++++++
> > 2 files changed, 36 insertions(+), 0 deletions(-)
> > create mode 100644 cpu/arm926ejs/davinci/dm365.c
> apply to u-boot-arm next
>
> Best Regards,
> J.
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
>
^ permalink raw reply [flat|nested] 6+ messages in thread
* [U-Boot] [PATCH] ARM: DaVinci: DaVinci DM365 SOC specific code
2009-08-18 15:21 ` John Rigby
@ 2009-08-18 15:24 ` Paulraj, Sandeep
2009-08-18 21:15 ` Wolfgang Denk
0 siblings, 1 reply; 6+ messages in thread
From: Paulraj, Sandeep @ 2009-08-18 15:24 UTC (permalink / raw)
To: u-boot
John,
Yesterday night after J-C mentioned that he applied 2 of my patches to u-boot-arm next I tried to checkout that branch
to add some more stuff on top of my Dm365 patches.
I could not see it either. But I have used that branch in the recent past. I don't know what is wrong.
Thanks,
Sandeep
________________________________
From: John Rigby [mailto:jcrigby at gmail.com]
Sent: Tuesday, August 18, 2009 11:21 AM
To: Jean-Christophe PLAGNIOL-VILLARD
Cc: Paulraj, Sandeep; u-boot at lists.denx.de
Subject: Re: [U-Boot] [PATCH] ARM: DaVinci: DaVinci DM365 SOC specific code
I don't see a next branch in u-boot-arm. Am I missing something?
Thanks
John
On Mon, Aug 17, 2009 at 4:01 PM, Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com<mailto:plagnioj@jcrosoft.com>> wrote:
On 11:20 Sat 15 Aug , s-paulraj at ti.com<mailto:s-paulraj@ti.com> wrote:
> From: Sandeep Paulraj <s-paulraj at ti.com<mailto:s-paulraj@ti.com>>
>
> This patch adds support for DaVinci DM365 SOC.
>
> Signed-off-by: Sandeep Paulraj <s-paulraj at ti.com<mailto:s-paulraj@ti.com>>
> ---
> cpu/arm926ejs/davinci/Makefile | 1 +
> cpu/arm926ejs/davinci/dm365.c | 35 +++++++++++++++++++++++++++++++++++
> 2 files changed, 36 insertions(+), 0 deletions(-)
> create mode 100644 cpu/arm926ejs/davinci/dm365.c
apply to u-boot-arm next
Best Regards,
J.
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de<mailto:U-Boot@lists.denx.de>
http://lists.denx.de/mailman/listinfo/u-boot
^ permalink raw reply [flat|nested] 6+ messages in thread
* [U-Boot] [PATCH] ARM: DaVinci: DaVinci DM365 SOC specific code
2009-08-18 15:24 ` Paulraj, Sandeep
@ 2009-08-18 21:15 ` Wolfgang Denk
2009-08-19 22:38 ` Jean-Christophe PLAGNIOL-VILLARD
0 siblings, 1 reply; 6+ messages in thread
From: Wolfgang Denk @ 2009-08-18 21:15 UTC (permalink / raw)
To: u-boot
Dear "Paulraj, Sandeep",
In message <0554BEF07D437848AF01B9C9B5F0BC5D7E996378@dlee01.ent.ti.com> you wrote:
>
> Yesterday night after J-C mentioned that he applied 2 of my patches to u-bo
> ot-arm next I tried to checkout that branch
> to add some more stuff on top of my Dm365 patches.
>
> I could not see it either. But I have used that branch in the recent past.
> I don't know what is wrong.
Unfortunately the U-Boot ARM repository is in a really poor state.
Commits and branches come and go more or less at ramdom.
I apologize for the inconveninces caused by that.
Jean-Christophe, we really need more consistency here.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
The nice thing about standards is that there are so many to choose
from. - Andrew S. Tanenbaum
^ permalink raw reply [flat|nested] 6+ messages in thread
* [U-Boot] [PATCH] ARM: DaVinci: DaVinci DM365 SOC specific code
2009-08-18 21:15 ` Wolfgang Denk
@ 2009-08-19 22:38 ` Jean-Christophe PLAGNIOL-VILLARD
0 siblings, 0 replies; 6+ messages in thread
From: Jean-Christophe PLAGNIOL-VILLARD @ 2009-08-19 22:38 UTC (permalink / raw)
To: u-boot
On 23:15 Tue 18 Aug , Wolfgang Denk wrote:
> Dear "Paulraj, Sandeep",
>
> In message <0554BEF07D437848AF01B9C9B5F0BC5D7E996378@dlee01.ent.ti.com> you wrote:
> >
> > Yesterday night after J-C mentioned that he applied 2 of my patches to u-bo
> > ot-arm next I tried to checkout that branch
> > to add some more stuff on top of my Dm365 patches.
> >
> > I could not see it either. But I have used that branch in the recent past.
> > I don't know what is wrong.
>
> Unfortunately the U-Boot ARM repository is in a really poor state.
> Commits and branches come and go more or less at ramdom.
>
> I apologize for the inconveninces caused by that.
>
> Jean-Christophe, we really need more consistency here.
>
I'm rebase the next now so yes I remove the old one
which was for the precedent merge
Best Regards,
J.
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2009-08-19 22:38 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-08-15 15:20 [U-Boot] [PATCH] ARM: DaVinci: DaVinci DM365 SOC specific code s-paulraj at ti.com
2009-08-17 22:01 ` Jean-Christophe PLAGNIOL-VILLARD
2009-08-18 15:21 ` John Rigby
2009-08-18 15:24 ` Paulraj, Sandeep
2009-08-18 21:15 ` Wolfgang Denk
2009-08-19 22:38 ` Jean-Christophe PLAGNIOL-VILLARD
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox