From: Wolfgang Denk <wd@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] imx27lite: add support for imx27lite board from LogicPD
Date: Wed, 26 Aug 2009 22:14:47 +0200 [thread overview]
Message-ID: <20090826201447.69FB1833DBD2@gemini.denx.de> (raw)
In-Reply-To: <20090814070359.GD11003@game.jcrosoft.org>
Dear Scott,
In message <20090814070359.GD11003@game.jcrosoft.org> Jean-Christophe PLAGNIOL-VILLARD wrote:
> On 02:32 Tue 11 Aug , Ilya Yanok wrote:
> > This patch adds support for i.MX27-LITEKIT development board from
> > LogicPD. This board uses i.MX27 SoC and has 2MB NOR flash, 64MB NAND
> > flash, FEC ethernet controller integrated into i.MX27.
> >
> > Signed-off-by: Ilya Yanok <yanok@emcraft.com>
> > ---
> > MAINTAINERS | 1 +
> > MAKEALL | 1 +
> > Makefile | 3 +
> > board/logicpd/imx27lite/Makefile | 51 ++++++
> > board/logicpd/imx27lite/config.mk | 1 +
> > board/logicpd/imx27lite/imx27lite.c | 73 +++++++++
> > board/logicpd/imx27lite/lowlevel_init.S | 170 +++++++++++++++++++++
> > cpu/arm926ejs/mx27/generic.c | 65 ++++++++
> > include/asm-arm/arch-mx27/imx-regs.h | 12 ++
> > include/configs/imx27lite.h | 252 +++++++++++++++++++++++++++++++
> > 10 files changed, 629 insertions(+), 0 deletions(-)
> > create mode 100644 board/logicpd/imx27lite/Makefile
> > create mode 100644 board/logicpd/imx27lite/config.mk
> > create mode 100644 board/logicpd/imx27lite/imx27lite.c
> > create mode 100644 board/logicpd/imx27lite/lowlevel_init.S
> > create mode 100644 include/configs/imx27lite.h
> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
>
> Scott could you applied on your tree as this one need the nand patch that you
> handle
Could you please run this through your "next" branch and send a pullr
equest? TIA.
Acked-by: Wolfgang Denk <wd@denx.de>
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
A father doesn't destroy his children.
-- Lt. Carolyn Palamas, "Who Mourns for Adonais?",
stardate 3468.1.
next prev parent reply other threads:[~2009-08-26 20:14 UTC|newest]
Thread overview: 70+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-06-08 0:12 [U-Boot] [PATCH 0/7][v3] Support for LogicPD i.MX27-LITEKIT development board Ilya Yanok
2009-06-08 0:12 ` [U-Boot] [PATCH 1/7] mx27: basic cpu support Ilya Yanok
2009-06-20 13:13 ` Jean-Christophe PLAGNIOL-VILLARD
2009-06-08 0:12 ` [U-Boot] [PATCH 2/7] serial_mx31: allow it to work with mx27 too and rename to serial_mxc Ilya Yanok
2009-06-20 13:18 ` Jean-Christophe PLAGNIOL-VILLARD
2009-06-08 0:12 ` [U-Boot] [PATCH 3/7] fec_imx27: driver for FEC ethernet controller on i.MX27 Ilya Yanok
2009-07-17 10:57 ` [U-Boot] [PATCH] fec_mxc: " Ilya Yanok
2009-07-17 14:05 ` Ben Warren
2009-07-21 15:32 ` Ilya Yanok
2009-07-22 22:23 ` Jean-Christophe PLAGNIOL-VILLARD
2009-07-22 23:03 ` Ben Warren
2009-07-23 6:28 ` Ben Warren
2009-06-08 0:12 ` [U-Boot] [PATCH 4/7] mxc_nand: add nand driver for MX2/MX3 Ilya Yanok
2009-06-20 13:22 ` Jean-Christophe PLAGNIOL-VILLARD
2009-06-22 23:43 ` Scott Wood
2009-06-23 20:03 ` Magnus Lilja
2009-07-03 19:03 ` Paul Thomas
2009-07-03 19:11 ` Paul Thomas
2009-07-17 10:48 ` Ilya Yanok
2009-07-17 10:53 ` [U-Boot] [PATCH] " Ilya Yanok
2009-07-22 21:33 ` Jean-Christophe PLAGNIOL-VILLARD
2009-07-28 22:37 ` Scott Wood
2009-08-03 1:45 ` Ilya Yanok
2009-08-04 23:32 ` Scott Wood
2009-08-10 22:32 ` Ilya Yanok
2009-08-11 22:53 ` Scott Wood
2009-08-03 2:01 ` Ilya Yanok
2009-08-03 16:58 ` Scott Wood
2009-07-17 16:00 ` [U-Boot] [PATCH 4/7] " Scott Wood
2009-06-08 0:12 ` [U-Boot] [PATCH 5/7] mxc-mmc: sdhc host driver for MX2 and MX3 proccessor Ilya Yanok
2009-06-21 11:04 ` Jean-Christophe PLAGNIOL-VILLARD
2009-06-23 23:02 ` alfred steele
2009-08-07 20:13 ` Jean-Christophe PLAGNIOL-VILLARD
2009-06-08 0:12 ` [U-Boot] [PATCH 6/7] arm: add support for CONFIG_GENERIC_MMC Ilya Yanok
2009-06-20 13:20 ` Jean-Christophe PLAGNIOL-VILLARD
2009-06-08 0:12 ` [U-Boot] [PATCH 7/7] imx27lite: add support for imx27lite board from LogicPD Ilya Yanok
2009-06-21 11:21 ` Jean-Christophe PLAGNIOL-VILLARD
2009-06-23 16:55 ` Detlev Zundel
2009-07-07 19:24 ` Wolfgang Denk
2009-07-17 11:00 ` [U-Boot] [PATCH] " Ilya Yanok
2009-07-22 21:37 ` Jean-Christophe PLAGNIOL-VILLARD
2009-07-22 22:17 ` Ilya Yanok
2009-07-23 21:37 ` Jean-Christophe PLAGNIOL-VILLARD
2009-08-03 1:46 ` Ilya Yanok
2009-08-03 5:32 ` Jean-Christophe PLAGNIOL-VILLARD
2009-08-03 8:19 ` Wolfgang Denk
2009-08-03 12:17 ` Jean-Christophe PLAGNIOL-VILLARD
2009-08-03 14:35 ` Wolfgang Denk
2009-08-05 10:09 ` javier Martin
2009-08-05 12:30 ` javier Martin
2009-08-05 12:45 ` Wolfgang Denk
2009-08-05 14:17 ` javier Martin
2009-08-05 14:21 ` Wolfgang Denk
2009-08-05 15:01 ` javier Martin
2009-08-06 20:10 ` Wolfgang Denk
2009-08-07 7:18 ` javier Martin
2009-08-07 9:13 ` Wolfgang Denk
2009-08-06 19:29 ` [U-Boot] [PATCH] ARM EABI: add new helper functions resp. function names Wolfgang Denk
2009-08-08 6:50 ` Dirk Behme
2009-08-08 7:16 ` Wolfgang Denk
2009-08-08 7:39 ` Dirk Behme
2009-08-09 21:28 ` Wolfgang Denk
2009-08-10 22:32 ` [U-Boot] [PATCH] imx27lite: add support for imx27lite board from LogicPD Ilya Yanok
2009-08-11 18:47 ` Fabio Estevam
2009-08-11 19:12 ` Ilya Yanok
2009-08-14 7:03 ` Jean-Christophe PLAGNIOL-VILLARD
2009-08-26 20:14 ` Wolfgang Denk [this message]
2009-08-26 20:43 ` Scott Wood
2009-09-01 20:10 ` Jean-Christophe PLAGNIOL-VILLARD
2009-06-28 9:52 ` [U-Boot] [PATCH 0/7][v3] Support for LogicPD i.MX27-LITEKIT development board Jean-Christophe PLAGNIOL-VILLARD
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090826201447.69FB1833DBD2@gemini.denx.de \
--to=wd@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox