[U-Boot] [PATCH v8] Support for the Calao TNY-A9260/TNY-A9G20 boards

[Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>]

On 16:04 Thu 20 Aug     , Albin Tonnerre wrote:
> The Calao TNY-A9260 and TNY-9G20 are boards manufactured and sold by
> Calao Systems <http://www.calao-systems.com>. Their components are very
> similar to the AT91SAM9260EK board, so their configuration is based on
> the configuration of this board. There are however some differences:
> different clocks, no LCD, no ethernet. They also can use SPI EEPROM to
> store the environment.
> 
> Signed-off-by: Albin Tonnerre <albin.tonnerre@free-electrons.com>
> ---
>  Changes in v7:
>   - As per Jean-Christophe's commentes, fix long lines and use uppercase for
>     defines in include/configs/tny_a9260.h. Slightly rework the ifdef logic in
>     the process
>   - Add an entry in MAINTAINERS for the tny_a9g20 as weel, since both 9260 and
>     9g20 are supported
> 
>  Changes in v8:
>   - Update MAKEALL to reflect the changes in Makefile, and add the tny_a9g20
> 
>  MAINTAINERS                              |    5 +
>  MAKEALL                                  |    2 +
>  Makefile                                 |   10 ++
>  board/calao/tny_a9260/Makefile           |   55 ++++++++++
>  board/calao/tny_a9260/config.mk          |    1 +
>  board/calao/tny_a9260/spi.c              |   50 +++++++++
>  board/calao/tny_a9260/tny_a9260.c        |  110 +++++++++++++++++++
>  cpu/arm926ejs/at91/at91sam9260_devices.c |    2 +-
>  include/configs/tny_a9260.h              |  172 ++++++++++++++++++++++++++++++
>  9 files changed, 406 insertions(+), 1 deletions(-)
>  create mode 100644 board/calao/tny_a9260/Makefile
>  create mode 100644 board/calao/tny_a9260/config.mk
>  create mode 100644 board/calao/tny_a9260/spi.c
>  create mode 100644 board/calao/tny_a9260/tny_a9260.c
>  create mode 100644 include/configs/tny_a9260.h
> 
applied to u-boot-arm

but merged manually

please next time when you add different board does it as a patch series
to avoid the manual merge

Best Regards,
J.