From: Matt Waddel <mwaddel@control4.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] TI: DaVinci DM365: Enabling net support on DM365
Date: Mon, 14 Sep 2009 15:43:28 -0600 [thread overview]
Message-ID: <200909141543.28989.mwaddel@control4.com> (raw)
In-Reply-To: <1252955798-31840-1-git-send-email-s-paulraj@ti.com>
Hi Sandeep,
Is there another part to this patch still coming or did I miss a patch
along the way? This patch as-is doesn't compile:
...
dm365evm.c: In function ?board_eth_init?:
dm365evm.c:47: error: ?GIO_DIR01? undeclared (first use in this function)
dm365evm.c:47: error: (Each undeclared identifier is reported only once
dm365evm.c:47: error: for each function it appears in.)
dm365evm.c:52: error: ?GIO_OUT_DATA01? undeclared (first use in this function)
Best regards,
Matt
On Monday 14 September 2009 01:16:38 pm s-paulraj at ti.com wrote:
> From: Sandeep Paulraj <s-paulraj@ti.com>
>
> This patch enables EMAC on the DM365 EVM.
>
> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
> ---
> board/davinci/dm365evm/dm365evm.c | 38 +++++++++++++++++++++++++++++++++++++
> 1 files changed, 38 insertions(+), 0 deletions(-)
>
> diff --git a/board/davinci/dm365evm/dm365evm.c b/board/davinci/dm365evm/dm365evm.c
> index 99392b3..2092324 100644
> --- a/board/davinci/dm365evm/dm365evm.c
> +++ b/board/davinci/dm365evm/dm365evm.c
> @@ -17,9 +17,11 @@
>
> #include <common.h>
> #include <nand.h>
> +#include <asm/io.h>
> #include <asm/arch/hardware.h>
> #include <asm/arch/emif_defs.h>
> #include <asm/arch/nand_defs.h>
> +#include <netdev.h>
> #include "../common/misc.h"
>
> DECLARE_GLOBAL_DATA_PTR;
> @@ -32,6 +34,42 @@ int board_init(void)
> return 0;
> }
>
> +#ifdef CONFIG_DRIVER_TI_EMAC
> +int board_eth_init(bd_t *bis)
> +{
> + uint8_t eeprom_enetaddr[6];
> + int i;
> +
> + /* Configure PINMUX 3 to enable EMAC pins */
> + writel((readl(PINMUX3) | 0x1affff), PINMUX3);
> +
> + /* Configure GPIO20 as output */
> + writel((readl(GIO_DIR01) & 0xffefffff), GIO_DIR01);
> +
> + /* Toggle GPIO 20 */
> + for (i = 0; i < 20; i++) {
> + /* GPIO 20 low */
> + writel((readl(GIO_OUT_DATA01) & 0xffefffff), GIO_OUT_DATA01);
> +
> + udelay(1000);
> +
> + /* GPIO 20 high */
> + writel((readl(GIO_OUT_DATA01) | 0x00100000), GIO_OUT_DATA01);
> + }
> +
> + /* Configure I2C pins so that EEPROM can be read */
> + writel((readl(PINMUX3) | 0x01400000), PINMUX3);
> +
> + /* Read Ethernet MAC address from EEPROM */
> + if (dvevm_read_mac_address(eeprom_enetaddr))
> + dv_configure_mac_address(eeprom_enetaddr);
> +
> + davinci_emac_initialize();
> +
> + return 0;
> +}
> +#endif
> +
> #ifdef CONFIG_NAND_DAVINCI
> static void nand_dm365evm_select_chip(struct mtd_info *mtd, int chip)
> {
> --
> 1.6.0.4
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
>
next prev parent reply other threads:[~2009-09-14 21:43 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-09-14 19:16 [U-Boot] [PATCH] TI: DaVinci DM365: Enabling net support on DM365 s-paulraj at ti.com
2009-09-14 21:43 ` Matt Waddel [this message]
2009-09-14 22:20 ` Paulraj, Sandeep
2009-09-18 21:06 ` Paulraj, Sandeep
2009-09-22 20:24 ` Wolfgang Denk
2009-09-22 20:23 ` Wolfgang Denk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200909141543.28989.mwaddel@control4.com \
--to=mwaddel@control4.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox