[U-Boot] [PATCH] TI: OMAP3: Overo Tobi ethernet support

[Olof Johansson <olof@lixom.net>]

On Tue, Sep 22, 2009 at 09:41:42PM +0200, Wolfgang Denk wrote:

> Please use "git format-patch" / "git send-email" to create and submit
> patches. For example, it is always nice to see a file statistics in
> the patch.

k.

> > + MUX_VAL(CP(GPMC_CLK),		(IDIS | PTU | EN  | M0)) /*GPMC_CLK*/\
> > + MUX_VAL(CP(GPMC_WAIT2),	(IEN  | PTU | EN  | M4)) /*GPIO_64*/\
> > +							 /* - SMSC911X_NRES*/\
> > + MUX_VAL(CP(MCSPI1_CS2),	(IEN  | PTU | DIS | M4)) /*GPIO_176 */\
> > +							 /* - LAN_INTR */\
> 
> Please use either no indentatioin at all, or indent by a multiple of
> TAB characters.

So no aligning with spaces at the end of a run of tabs to make them line
up? Ok, if you prefer so.

> > diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h
> > index 07a031b..6616b55 100644
> > --- a/include/configs/omap3_overo.h
> > +++ b/include/configs/omap3_overo.h
> > @@ -28,7 +28,8 @@
> >  #define CONFIG_OMAP		1	/* in a TI OMAP core */
> >  #define CONFIG_OMAP34XX		1	/* which is a 34XX */
> >  #define CONFIG_OMAP3430		1	/* which is in a 3430 */
> > -#define CONFIG_OMAP3_OVERO		1	/* working with overo */
> > +#define CONFIG_OMAP3_OVERO	1	/* working with overo */
> > +//#define CONFIG_OMAP3_OVERO_TOBI	1	/* overo mounted on tobi */
> 
> Please do not use an C++ comments, and do not add dead code.

What is the preferred way to show that the option is available but not enabled
by default?

> > +#if !defined(CONFIG_OMAP3_OVERO_TOBI)
> > +#undef CONFIG_CMD_NET		/* bootp, tftpboot, rarpboot	*/
> > +#endif
> > +
> > +
> 
> Only one blank line, please.
> 
> > +#endif /* (CONFIG_CMD_NET) */
> > +
> > +
> 
> Ditto.

Sure (on both).

This patch has been applied and pulled though. I'll submit an incremental patch to address the above.


-Olof