[U-Boot] [PATCH] ppc4xx: Reorganize DDR2 ECC handling

[Stefan Roese <sr@denx.de>]

Hi Felix,

On Sunday 27 September 2009 23:56:12 Felix Radensky wrote:
> Reorganize DDR2 ECC handling to use common code for
> SPD DIMMs and soldered SDRAM. Also, use common code
> to display SDRAM info (ECC, CAS latency) for SPD and
> soldered SDRAM variants.

Thanks. This is a first step into consolidation of the PPC4xx ECC handling. 
You didn't include the DDR (non-DDR2) ECC handling though. My understanding 
was that this should be done as well. I tried to merge this stuff today and 
I'll send a patch for this DDR & DDR2 ECC handling merge soon.

Some other minor issues with this patch.

I do get this compilation warning:

Configuring for kilauea board...
44x_spd_ddr2.c:102: warning: 'wait_ddr_idle' defined but not used
44x_spd_ddr2.c:114: warning: 'sdram_memsize' defined but not used
   text    data     bss     dec     hex filename
 286528   20680   46556  353764   565e4 ./u-boot


Additionally the patch has some whitespace problems:

[stefan at stefan-desktop u-boot-ppc4xx (4xx-ecc)]$ git am -s 
patches_misc/\[PATCH\]\ ppc4xx\:\ Reorganize\ DDR2\ ECC\ handling.mbox
Applying: ppc4xx: Reorganize DDR2 ECC handling                                                                                   
/home/stefan/git/u-boot/u-boot-ppc4xx/.git/rebase-apply/patch:77: trailing 
whitespace.                                           
#endif                                                                                                                           
/home/stefan/git/u-boot/u-boot-ppc4xx/.git/rebase-apply/patch:137: trailing 
whitespace.                                          
#if defined(CONFIG_440)                                                                                                          
warning: 2 lines applied after fixing whitespace errors.


No need to clean this up. I already silenced the warnings in my addon patch.

Thanks.

Cheers,
Stefan

--
DENX Software Engineering GmbH,      MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich,  Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-0 Fax: (+49)-8142-66989-80 Email: office at denx.de