From mboxrd@z Thu Jan 1 00:00:00 1970 From: Anton Vorontsov Date: Thu, 8 Oct 2009 20:19:54 +0400 Subject: [U-Boot] [PATCH 2/7] mpc85xx: Add eSDHC support for MPC8569E-MDS boards In-Reply-To: <964055EB-4E38-4A73-8D40-BE68C9047694@kernel.crashing.org> References: <20090819183716.GB779@oksana.dev.rtsoft.ru> <2D00857B-1E15-45C7-AB4A-2EB951CF168A@kernel.crashing.org> <964055EB-4E38-4A73-8D40-BE68C9047694@kernel.crashing.org> Message-ID: <20091008161954.GA14639@oksana.dev.rtsoft.ru> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Thu, Oct 08, 2009 at 10:52:08AM -0500, Kumar Gala wrote: > > On Sep 15, 2009, at 11:15 PM, Kumar Gala wrote: > > > > >On Aug 19, 2009, at 1:37 PM, Anton Vorontsov wrote: > > > >>eSDHC is mutually exlusive with UART0* and I2C2. When eSDHC is > >>used, we should switch u-boot console to UART1, and make the > >>proper device-tree fixups. > >> > >>* Actually, according to User's Guide we can use eSDHC in serial > >>(1-bit) mode without disabling UART0, but for me it doesn't work > >>on prototype boards. > >> > >>Signed-off-by: Anton Vorontsov > >>--- > >>board/freescale/mpc8569mds/mpc8569mds.c | 85 ++++++++++++++++++++++ > >>+++++++++ > >>cpu/mpc85xx/speed.c | 2 + > >>include/asm-ppc/global_data.h | 3 +- > >>include/configs/MPC8569MDS.h | 16 ++++++ > >>4 files changed, 105 insertions(+), 1 deletions(-) > > Did you have any plans on updating these patches? I'll resend the whole series soon... Thanks, -- Anton Vorontsov email: cbouatmailru at gmail.com irc://irc.freenode.net/bd2