From: Kyungmin Park <kmpark@infradead.org>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] Reduce apollon OneNAND IPL code
Date: Mon, 12 Oct 2009 09:17:49 +0900 [thread overview]
Message-ID: <20091012001749.GA23445@july> (raw)
After OneNAND IPL updated, apollon boot code exceeds 1KiB size,
This patch reduces the apollon boot code
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
---
diff --git a/onenand_ipl/board/apollon/apollon.c b/onenand_ipl/board/apollon/apollon.c
index 4936e00..4d4564c 100644
--- a/onenand_ipl/board/apollon/apollon.c
+++ b/onenand_ipl/board/apollon/apollon.c
@@ -54,7 +54,6 @@ static void muxSetupUART1(void)
/* UART1_RX pin configuration, PIN = T21 */
write_config_reg(CONTROL_PADCONF_UART1_RX, 0);
}
-#endif
/**********************************************************
* Routine: s_init
@@ -63,8 +62,7 @@ static void muxSetupUART1(void)
**********************************************************/
int s_init(int skip)
{
-#ifdef CONFIG_SYS_PRINTF
muxSetupUART1();
-#endif
return 0;
}
+#endif
diff --git a/onenand_ipl/board/apollon/low_levelinit.S b/onenand_ipl/board/apollon/low_levelinit.S
index 205170f..1eb116e 100644
--- a/onenand_ipl/board/apollon/low_levelinit.S
+++ b/onenand_ipl/board/apollon/low_levelinit.S
@@ -64,6 +64,10 @@
#error "Please configure PRCM schecm"
#endif
+/*
+ * r5 has zero always
+ */
+
_TEXT_BASE:
.word TEXT_BASE /* sdram load addr from config.mk */
@@ -87,15 +91,11 @@ lowlevel_init:
#endif
/* Pin muxing for SDRC */
- mov r1, #0x00
- ldr r0, =0x480000A1 /* ball C12, mode 0 */
- strb r1, [r0]
-
- ldr r0, =0x48000032 /* ball D11, mode 0 */
- strb r1, [r0]
-
- ldr r0, =0x480000A3 /* ball B13, mode 0 */
- strb r1, [r0]
+ mov r5, #0x00
+ ldr r0, =0x48000000
+ strb r5, [r0, #0xA1] /* ball C12, mode 0 */
+ strb r5, [r0, #0x32] /* ball D11, mode 0 */
+ strb r5, [r0, #0xA3] /* ball B13, mode 0 */
/* SDRC setting */
ldr r0, =OMAP2420_SDRC_BASE
@@ -129,8 +129,7 @@ lowlevel_init:
ldr r1, =0x00000007
str r1, [r0, #0xA8]
- ldr r1, =0x00000000
- str r1, [r0, #0xA8]
+ str r5, [r0, #0xA8]
ldr r1, =0x00000001
str r1, [r0, #0xA8]
@@ -150,9 +149,8 @@ lowlevel_init:
/* Note: You MUST set EMR values */
/* EMR1 & EMR2 */
- ldr r1, =0x00000000
- str r1, [r0, #0x88]
- str r1, [r0, #0x8C]
+ str r5, [r0, #0x88]
+ str r5, [r0, #0x8C]
#ifdef OLD_SDRC_DLLA_CTRL
/* SDRC_DLLA_CTRL */
@@ -185,6 +183,7 @@ lowlevel_init:
subs r2, r2, #0x1
bne 1b
+#ifdef CONFIG_PRINTF
ldr sp, SRAM_STACK
str ip, [sp] /* stash old link register */
mov ip, lr /* save link reg across call */
@@ -194,6 +193,7 @@ lowlevel_init:
ldr ip, [sp] /* restore save ip */
mov lr, ip /* restore link reg */
+#endif
/* back to arch calling code */
mov pc, lr
next reply other threads:[~2009-10-12 0:17 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-10-12 0:17 Kyungmin Park [this message]
2009-10-12 16:48 ` [U-Boot] [PATCH] Reduce apollon OneNAND IPL code Scott Wood
2009-10-13 1:44 ` Kyungmin Park
2009-11-22 22:56 ` Wolfgang Denk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20091012001749.GA23445@july \
--to=kmpark@infradead.org \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox