[U-Boot] [PATCH] galaxy5200: change cs1 configuration

[U-Boot] [PATCH] galaxy5200: change cs1 configuration

[Eric Millbrandt]

Hello Wolfgang,

This patch, from Sept. 25, seems to have gotten lost in the din.  Could you
please pick up this patch?

Thanks
Eric

On Wed, 14 Oct 2009 09:31:45 -0400, Eric Millbrandt wrote
> -----Original Message-----
> From: u-boot-bounces at lists.denx.de [mailto:u-boot-
> bounces at lists.denx.de] On Behalf Of Eric Millbrandt Sent: Friday,
>  September 25, 2009 18:48 To: Wolfgang Denk; Grant Likey Cc:
u-boot at lists.denx.de
> Subject: [U-Boot] [PATCH] galaxy5200: change cs1 configuration
> 
> Correct the chip select configuration for the nand flash chip select.
> 
> Signed-off-by: Eric Millbrandt <emillbrandt@dekaresearch.com>
> ---
>  include/configs/galaxy5200.h |    2 +-
>  1 files changed, 1 insertions(+), 1 deletions(-)
> 
> diff --git a/include/configs/galaxy5200.h b/include/configs/galaxy5200.h
> index 3b67ea9..931acfb 100644
> --- a/include/configs/galaxy5200.h
> +++ b/include/configs/galaxy5200.h
> @@ -210,7 +210,7 @@
>  /* Chip Select configuration for NAND flash */
>  #define CONFIG_SYS_CS1_START           0x20000000
>  #define CONFIG_SYS_CS1_SIZE            0x90000
> -#define CONFIG_SYS_CS1_CFG             0x0002d900
> +#define CONFIG_SYS_CS1_CFG             0x00025b00
> 
>  /* Chip Select configuration for Epson S1D13513 */
>  #define CONFIG_SYS_CS3_START           0x10000000
> --
> 1.6.3.1
> 
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
> 
> 

[U-Boot] [PATCH] galaxy5200: change cs1 configuration

[Eric Millbrandt]

Correct the chip select configuration for the nand flash chip select.

Signed-off-by: Eric Millbrandt <emillbrandt@dekaresearch.com>
---
 include/configs/galaxy5200.h |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/include/configs/galaxy5200.h b/include/configs/galaxy5200.h
index 3b67ea9..931acfb 100644
--- a/include/configs/galaxy5200.h
+++ b/include/configs/galaxy5200.h
@@ -210,7 +210,7 @@
 /* Chip Select configuration for NAND flash */
 #define CONFIG_SYS_CS1_START		0x20000000
 #define CONFIG_SYS_CS1_SIZE		0x90000
-#define CONFIG_SYS_CS1_CFG		0x0002d900
+#define CONFIG_SYS_CS1_CFG		0x00025b00
 
 /* Chip Select configuration for Epson S1D13513 */
 #define CONFIG_SYS_CS3_START		0x10000000
-- 
1.6.3.1

[U-Boot] [PATCH] galaxy5200: change cs1 configuration

[Wolfgang Denk]

Dear "Eric Millbrandt",

In message <20090925224247.M56988@coldhaus.com> you wrote:
> Correct the chip select configuration for the nand flash chip select.
> 
> Signed-off-by: Eric Millbrandt <emillbrandt@dekaresearch.com>
> ---
>  include/configs/galaxy5200.h |    2 +-
>  1 files changed, 1 insertions(+), 1 deletions(-)

Applied, thanks.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"One thing they don't tell you about doing  experimental  physics  is
that sometimes you must work under adverse conditions... like a state
of sheer terror."                                    - W. K. Hartmann