From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefan Roese Date: Fri, 23 Oct 2009 15:56:08 +0200 Subject: [U-Boot] [PATCH 2/2 v3] ppc4xx: Update flash size in reg property of the NOR flash node In-Reply-To: <1256124314-8927-1-git-send-email-sr@denx.de> References: <1256124314-8927-1-git-send-email-sr@denx.de> Message-ID: <200910231556.08794.sr@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Wednesday 21 October 2009 13:25:14 Stefan Roese wrote: > Till now only the ranges in the ebc node are updated with the values > currently configured in the PPC4xx EBC controller. With this patch now > the NOR flash size is updated in the device tree blob as well. This is > done by scanning the compatible nodes "cfi-flash" and "jedec-flash" > for the correct chip select number. > > This size fixup is enabled for all AMCC eval board right now. Other > 4xx boards may want to enable it as well, if this problem with multiple > NOR FLASH sizes exists. Applied to u-boot-ppc4xx/master. Thanks. Cheers, Stefan -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-0 Fax: (+49)-8142-66989-80 Email: office at denx.de