From mboxrd@z Thu Jan  1 00:00:00 1970
From: Stefan Roese <sr@denx.de>
Date: Fri, 23 Oct 2009 16:03:49 +0200
Subject: [U-Boot] [PATCH 1/4] ppc4xx: Add function to check and
	dynamically change PCI sync clock
In-Reply-To: <1255961762-5790-1-git-send-email-sr@denx.de>
References: <1255961762-5790-1-git-send-email-sr@denx.de>
Message-ID: <200910231603.50001.sr@denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On Monday 19 October 2009 16:16:02 Stefan Roese wrote:
> PPC440EP(x)/PPC440GR(x):
> In asynchronous PCI mode, the synchronous PCI clock must meet
> certain requirements. The following equation describes the
> relationship that must be maintained between the asynchronous PCI
> clock and synchronous PCI clock. Select an appropriate PCI:PLB
> ratio to maintain the relationship:
> 
> AsyncPCIClk - 1MHz <= SyncPCIclock <= (2 * AsyncPCIClk) - 1MHz
> 
> This patch now adds a function to check and reconfigure the sync
> PCI clock to meet this requirement. This is in preparation for
> some AMCC boards (Sequoia/Rainier and Yosemite/Yellowstone) using this
> function to not violate the PCI clocking rules.

Patch series (1...4) applied to u-boot-ppc4xx/master. Thanks.

Cheers,
Stefan

--
DENX Software Engineering GmbH,      MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich,  Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-0 Fax: (+49)-8142-66989-80 Email: office at denx.de