From mboxrd@z Thu Jan  1 00:00:00 1970
From: Dieter Kiermaier <dk-arm-linux@gmx.de>
Date: Wed, 4 Nov 2009 08:14:30 +0100
Subject: [U-Boot] multiple partitions in mtdparts
In-Reply-To: <1257294893.2375.1343441741@webmail.messagingengine.com>
References: <1257292804-10612-1-git-send-email-Tom.Rix@windriver.com>
	<1257292804-10612-3-git-send-email-Tom.Rix@windriver.com>
	<1257294893.2375.1343441741@webmail.messagingengine.com>
Message-ID: <200911040814.33133.dk-arm-linux@gmx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Am Mittwoch 04 November 2009 01:34:53 schrieb myuboot at fastmail.fm:
> Hi, 
> 
> I am trying to define multiple partitions using mtdparts variable. But I
> can't get it set automatically right.
> 
> I defined the set_bootargs as the following:
> set_bootargs=setenv bootargs root=/dev/mtdblock2 rootfs=cramfs,jffs2
> mtdparts=ph
> ysmap-flash.0:256k(u-boot),256k(u-boot-env),7936k(root1),7936k(root2);physmap-fl
> ash.1:16384k(data) console=ttyS0,115200n8
> 
> But when I run set_bootargs, I got the following error - 
> # run set_bootargs
> Unknown command 'physmap-flash.1:16384k(data)' - try 'help'
> Can someone help me with the correct format on mtdparts? thanks a lot.
> 

I don't know the exact format but it looks like the ";" between (root2);physmap-flash1 causes your error?

Dieter

> 
> ====================================================
> mtdparts=mtdparts=physmap-flash.0:256k(u-boot),256k(u-boot-env),7936k(root1),793
> 6k(root2);physmap-flash.1:16384k(data)
> boot=run set_bootargs;chpart nor0,${boot_device};fsload
> boot/uImage;bootm
> mtdids=nor0=physmap-flash.0,nor1=physmap-flash.1
> partition=nor0,2
> mtddevnum=2
> mtddevname=root1
> set_bootargs=setenv bootargs root=/dev/mtdblock2 rootfs=cramfs,jffs2
> mtdparts=ph
> ysmap-flash.0:256k(u-boot),256k(u-boot-env),7936k(root1),7936k(root2);physmap-fl
> ash.1:16384k(data) console=ttyS0,115200n8
> bootargs=root=/dev/mtdblock2 rootfs=cramfs,jffs2
> mtdparts=physmap-flash.0:256k(u
> -boot),256k(u-boot-env),7936k(root1),7936k(root2)
> 
> Environment size: 847/262140 bytes
> # run set_bootargs
> Unknown command 'physmap-flash.1:16384k(data)' - try 'help'
> #
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
>