* [U-Boot] SPI support for Sequoia board
@ 2009-12-16 5:50 Zaahir Khan
2009-12-16 8:03 ` Stefan Roese
0 siblings, 1 reply; 2+ messages in thread
From: Zaahir Khan @ 2009-12-16 5:50 UTC (permalink / raw)
To: u-boot
Hello All,
I am using AMCC sequoia board.
using u-boot version U-Boot 1.3.4
Need to implement SPI based RTC chip.
I find some problem in implementing SPI, is some patch there?
Any support appreciated.
Thanks & regards,
Zaahir Khan
^ permalink raw reply [flat|nested] 2+ messages in thread
* [U-Boot] SPI support for Sequoia board
2009-12-16 5:50 [U-Boot] SPI support for Sequoia board Zaahir Khan
@ 2009-12-16 8:03 ` Stefan Roese
0 siblings, 0 replies; 2+ messages in thread
From: Stefan Roese @ 2009-12-16 8:03 UTC (permalink / raw)
To: u-boot
On Wednesday 16 December 2009 06:50:22 Zaahir Khan wrote:
> I am using AMCC sequoia board.
>
> using u-boot version U-Boot 1.3.4
That's old. I recommend to update to the latest version.
> Need to implement SPI based RTC chip.
>
> I find some problem in implementing SPI, is some patch there?
>
> Any support appreciated.
No, I'm not aware of any PPC4xx SPI support. It shouldn't be too hard though
to implement this.
Cheers,
Stefan
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-0 Fax: (+49)-8142-66989-80 Email: office at denx.de
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2009-12-16 8:03 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-12-16 5:50 [U-Boot] SPI support for Sequoia board Zaahir Khan
2009-12-16 8:03 ` Stefan Roese
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox