From: Wolfgang Denk <wd@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] Pull request - net/next
Date: Thu, 17 Dec 2009 22:59:57 +0100 [thread overview]
Message-ID: <20091217215957.F06ECD43F21@gemini.denx.de> (raw)
In-Reply-To: <4B29C3A2.6000905@gmail.com>
Dear Ben Warren,
In message <4B29C3A2.6000905@gmail.com> you wrote:
> Wolfgang,
>
> The following changes since commit 4b142febff71eabdb7ddbb125c7b583b24ddc434:
> Heiko Schocher (1):
> common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-net.git next
>
> Ben Warren (1):
> Net: Clean up LAN91C96 Support
>
> John Ogness (1):
> fec_mxc: incomplete error handling
>
> Mike Frysinger (1):
> net: pull CONFIG checks out of source and into makefile
>
> Nishanth Menon (3):
> NET: LAN91C96 CONFIG_NET_MULTIify
> TI OMAP3: SDP3430 FIX NET_MULTI Warning
> LAN91C96: Enable NET_MULTI LAN driver
>
> Reinhard Arlt (1):
> net: e1000: Add support for the Intel 82546GB controller
>
> Remy Bohmer (1):
> Add error codes/handling for TFTP-server
>
> Thomas Weber (1):
> net: dm9000x: fix debug output
>
> board/apollon/apollon.c | 13 +-
> board/assabet/assabet.c | 12 +
> board/dave/B2/B2.c | 12 +
> board/gcplus/gcplus.c | 12 +
> board/logicpd/zoom1/zoom1.c | 12 +
> board/logicpd/zoom2/zoom2.c | 12 +
> board/lubbock/lubbock.c | 12 +
> board/ti/omap1510inn/omap1510innovator.c | 12 +
> board/ti/omap1610inn/omap1610innovator.c | 12 +
> board/ti/omap2420h4/omap2420h4.c | 12 +
> board/ti/omap5912osk/omap5912osk.c | 12 +
> board/ti/omap730p2/omap730p2.c | 12 +
> board/ti/sdp3430/sdp.c | 12 +-
> drivers/net/Makefile | 2 +-
> drivers/net/dm9000x.c | 2 +-
> drivers/net/e1000.c | 1 +
> drivers/net/fec_mxc.c | 1 +
> drivers/net/lan91c96.c | 452 ++++++++++++------------------
> drivers/net/lan91c96.h | 110 ++++----
> include/configs/B2.h | 4 +-
> include/configs/apollon.h | 3 +-
> include/configs/assabet.h | 3 +-
> include/configs/gcplus.h | 3 +-
> include/configs/lubbock.h | 3 +-
> include/configs/omap1510inn.h | 3 +-
> include/configs/omap1610h2.h | 3 +-
> include/configs/omap1610inn.h | 3 +-
> include/configs/omap2420h4.h | 3 +-
> include/configs/omap3_sdp3430.h | 3 +-
> include/configs/omap5912osk.h | 3 +-
> include/configs/omap730p2.h | 3 +-
> include/configs/pleb2.h | 6 +-
> include/netdev.h | 1 +
> include/pci_ids.h | 1 +
> net/Makefile | 12 +-
> net/bootp.c | 4 -
> net/eth.c | 7 +-
> net/net.c | 4 -
> net/nfs.c | 4 -
> net/rarp.c | 4 -
> net/tftp.c | 36 ++-
> 41 files changed, 452 insertions(+), 389 deletions(-)
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Time is fluid ... like a river with currents, eddies, backwash.
-- Spock, "The City on the Edge of Forever", stardate 3134.0
next prev parent reply other threads:[~2009-12-17 21:59 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-12-17 5:37 [U-Boot] Pull request - net/next Ben Warren
2009-12-17 21:59 ` Wolfgang Denk [this message]
-- strict thread matches above, loose matches on Subject: below --
2009-08-25 20:38 Ben Warren
2009-08-25 21:06 ` Wolfgang Denk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20091217215957.F06ECD43F21@gemini.denx.de \
--to=wd@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox