From: Scott Wood <scottwood@freescale.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] uboot.bin for smdkc100_config fails to boot from NAND
Date: Wed, 13 Jan 2010 12:19:09 -0600 [thread overview]
Message-ID: <20100113181909.GA14386@loki.buserror.net> (raw)
In-Reply-To: <ef0d8a251001130151o4a287779vf728a65db1631ce@mail.gmail.com>
On Wed, Jan 13, 2010 at 03:21:50PM +0530, Naveen Krishna Ch wrote:
> Hi All,
>
> I have a SMDKC100 boards with Single chip NAND
>
> Built the mainline uboot for
>
> Das U-Boot# smdkc100_config; make
>
> i use a In-Circuit Debugger to flash the uboot.bin
> to the NAND.
>
> I checked the dip switches & Jumpers are proper.
>
> The In-Circuit Debugger shows "Emulation running"
> But, nothing comes up on the UART0
>
> What could be the problem, Any pointers..
Does this chip/board have special hardware/ROM to load a full u-boot image
out of NAND into somewhere it can execute?
If not, you'll need nand_spl support for this board.
-Scott
prev parent reply other threads:[~2010-01-13 18:19 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-01-13 9:51 [U-Boot] uboot.bin for smdkc100_config fails to boot from NAND Naveen Krishna Ch
2010-01-13 18:19 ` Scott Wood [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100113181909.GA14386@loki.buserror.net \
--to=scottwood@freescale.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox