[U-Boot] [PATCH ARM] Update the s3c2410 nand driver from linux-2.6.31.5

[Scott Wood <scottwood@freescale.com>]

On Thu, Nov 05, 2009 at 08:53:36AM +0000, kevin.morfitt at fearnside-systems.co.uk wrote:
> This patch updates the s3c2410 nand driver from that of linux 2.6.31.5, 
> modified to make it work in the u-boot mtd nand architecture and to allow
> setting the flash timing parameters from a board config file instead of
> being hard coded. Note that this modified driver supports s3c2410 and 
> s3c2440.
> 
> Signed-off-by: Kevin Morfitt <kevin.morfitt@fearnside-systems.co.uk>
> ---
> 
> checkpatch.pl shows no errors or warnings, and MAKEALL ARM9 shows no new
> errors or warnings.
> 
> Tested on an Embest SBC2440-II Board with local s3c2440 patches as I don't
> have an s3c2410 board.
> 
>  drivers/mtd/nand/s3c2410_nand.c        |  134 +++++++++++++++++--------------
>  include/asm-arm/arch-s3c24x0/s3c2410.h |   25 ++++++
>  2 files changed, 98 insertions(+), 61 deletions(-)

It looks like this got missed, probably because it either depended on
something in (or destined for) the ARM tree, or I just assumed that because
of the "PATCH ARM".

Unfortunately, it doesn't apply cleanly anymore.  Could you resend, if it's
still needed?

-Scott