[U-Boot] [PATCH] ppc4xx: Fix sending type 1 PCI transactions

[U-Boot] [PATCH] ppc4xx: Fix sending type 1 PCI transactions

[Felix Radensky]

The list of 4xx SoCs that should send type 1 PCI transactions
is not defined correctly. As a result PCI-PCI bridges and devices
behind them are not identified. The following 4xx variants should
send type 1 transactions: 440GX, 440GP, 440SP, 440SPE and all 460s.

Signed-off-by: Felix Radensky <felix@embedded-sol.com>
---
 drivers/pci/pci_indirect.c |    3 ++-
 1 files changed, 2 insertions(+), 1 deletions(-)

diff --git a/drivers/pci/pci_indirect.c b/drivers/pci/pci_indirect.c
index ab51f8d..0419a68 100644
--- a/drivers/pci/pci_indirect.c
+++ b/drivers/pci/pci_indirect.c
@@ -59,7 +59,8 @@ indirect_##rw##_config_##size(struct pci_controller *hose,               \
 	cfg_##rw(val, hose->cfg_data + (offset & mask), type, op);       \
 	return 0;                                                        \
 }
-#elif defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR) || defined(CONFIG_440SPE)
+#elif defined(CONFIG_440GX) || defined(CONFIG_440GP) || defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
+      defined(CONFIG_460EX) || defined(CONFIG_460GT) || defined(CONFIG_460SX)
 #define INDIRECT_PCI_OP(rw, size, type, op, mask)			 \
 static int								 \
 indirect_##rw##_config_##size(struct pci_controller *hose,		 \
-- 
1.5.4.3

[U-Boot] [PATCH] ppc4xx: Fix sending type 1 PCI transactions

[Stefan Roese]

On Thursday 21 January 2010 23:47:21 Felix Radensky wrote:
> The list of 4xx SoCs that should send type 1 PCI transactions
> is not defined correctly. As a result PCI-PCI bridges and devices
> behind them are not identified. The following 4xx variants should
> send type 1 transactions: 440GX, 440GP, 440SP, 440SPE and all 460s.

Applied to u-boot-ppc4xx/master. Thanks.
 
Cheers,
Stefan

--
DENX Software Engineering GmbH,      MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich,  Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-0 Fax: (+49)-8142-66989-80 Email: office at denx.de