From: Alessandro Rubini <rubini-list@gnudd.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [STATUS] Patch status update
Date: Tue, 26 Jan 2010 09:13:43 +0100 [thread overview]
Message-ID: <20100126081343.GA7876@morgana.gnudd.com> (raw)
In-Reply-To: <20100125224448.0FAC9D334C9@gemini.denx.de>
> 4051 11/06 Alessandro Rubini [U-Boot] [PATCH V3] Nomadik: fix reset_timer()
> http://article.gmane.org/gmane.comp.boot-loaders.u-boot/71200
Superseded by V4 below.
> 4940 11/25 Alessandro Rubini [U-Boot] [PATCH V4] Nomadik: fix reset_timer()
> http://article.gmane.org/gmane.comp.boot-loaders.u-boot/72083
This is needed for saveenv to work reliably. I'd like it to be merged
Then there is my sequence of 9 nhk patches. V2 is obsoleted by V3 which
fixed structure definitions and removed a few debugging printf.
So these are obsolete:
> 4930 11/25 Alessandro Rubini [U-Boot] [PATCH V2 0/9] display and keypad support for nhk8815
> http://article.gmane.org/gmane.comp.boot-loaders.u-boot/72073
> 4932 11/25 Alessandro Rubini [U-Boot] [PATCH V2 2/9] video: add amba-clcd prime-cell
> http://article.gmane.org/gmane.comp.boot-loaders.u-boot/72075
> 4933 11/25 Alessandro Rubini [U-Boot] [PATCH V2 3/9] include/nomadik.h: add physical address for cldc
> http://article.gmane.org/gmane.comp.boot-loaders.u-boot/72076
> 4934 11/25 Alessandro Rubini [U-Boot] [PATCH V2 4/9] drivers/misc: add stmpe2401 port extender and keypad controller
> http://article.gmane.org/gmane.comp.boot-loaders.u-boot/72077
> 4935 11/25 Alessandro Rubini [U-Boot] [PATCH V2 5/9] nhk8815.h: define we need stmpe
> http://article.gmane.org/gmane.comp.boot-loaders.u-boot/72078
> 4936 11/25 Alessandro Rubini [U-Boot] [PATCH V2 6/9] lcd: make 16bpp work
> http://article.gmane.org/gmane.comp.boot-loaders.u-boot/72079
> 4937 11/25 Alessandro Rubini [U-Boot] [PATCH V2 7/9] nhk8815: added keypad
> http://article.gmane.org/gmane.comp.boot-loaders.u-boot/72080
> 4938 11/25 Alessandro Rubini [U-Boot] [PATCH V2 8/9] nhk8815: start lower in RAM, so the 800x480 frame buffer fits
> http://article.gmane.org/gmane.comp.boot-loaders.u-boot/72081
> 4939 11/25 Alessandro Rubini [U-Boot] [PATCH V2 9/9] nhk8815: added lcd support
> http://article.gmane.org/gmane.comp.boot-loaders.u-boot/72082
As for V3 this is the status:
> 5259 12/05 Alessandro Rubini [U-Boot] [PATCH V3 0/9] display and keypad support for nhk8815
> http://article.gmane.org/gmane.comp.boot-loaders.u-boot/72395
cover letter, please discard
> 5260 12/05 Alessandro Rubini [U-Boot] [PATCH V3 1/9] nhk8815: change the order of initialization
> http://article.gmane.org/gmane.comp.boot-loaders.u-boot/72396
Needed for correct bringup of diplay in 7/9 and 9/9.
> 5261 12/05 Alessandro Rubini [U-Boot] [PATCH V3 2/9] video: add amba-clcd prime-cell
> http://article.gmane.org/gmane.comp.boot-loaders.u-boot/72397
> 5262 12/05 Alessandro Rubini [U-Boot] [PATCH V3 3/9] include/nomadik.h: add physical address for cldc
> http://article.gmane.org/gmane.comp.boot-loaders.u-boot/72398
These two have been applied to u-boot-video/next by Anatolij (Dec 12). Still in next branch.
> 5263 12/05 Alessandro Rubini [U-Boot] [PATCH V3 4/9] drivers/misc: add stmpe2401 port extender and keypad controller
> http://article.gmane.org/gmane.comp.boot-loaders.u-boot/72399
> 5264 12/05 Alessandro Rubini [U-Boot] [PATCH V3 5/9] nhk8815.h: define we need stmpe
> http://article.gmane.org/gmane.comp.boot-loaders.u-boot/72400
> 5265 12/05 Alessandro Rubini [U-Boot] [PATCH V3 6/9] lcd: make 16bpp work
> http://article.gmane.org/gmane.comp.boot-loaders.u-boot/72401
> 5266 12/05 Alessandro Rubini [U-Boot] [PATCH V3 7/9] nhk8815: added keypad
> http://article.gmane.org/gmane.comp.boot-loaders.u-boot/72402
> 5267 12/05 Alessandro Rubini [U-Boot] [PATCH V3 8/9] nhk8815: start lower in RAM, so the 800x480 frame buffer fits
> http://article.gmane.org/gmane.comp.boot-loaders.u-boot/72403
> 5268 12/05 Alessandro Rubini [U-Boot] [PATCH V3 9/9] nhk8815: added lcd support
> http://article.gmane.org/gmane.comp.boot-loaders.u-boot/72404
These depend on the ones in video/next and apply cleanly to the
master branch as of today. There is one minor delay about
lcd_setfgcolor/lcd_setbgcolor that was sorted out by Anatolij on Dec
12 ("lcd: remove CONFIG_ATMEL_LCD ifdefs from lcd_setfgcolor").
But his patch isn't in master yet nor in the video branches.
Thanks
/alessandro
next prev parent reply other threads:[~2010-01-26 8:13 UTC|newest]
Thread overview: 54+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-01-25 22:44 [U-Boot] [STATUS] Patch status update Wolfgang Denk
2010-01-25 23:05 ` Albin Tonnerre
2010-01-26 16:36 ` Wolfgang Denk
2010-03-13 17:00 ` Albin Tonnerre
2010-01-25 23:13 ` John Rigby
2010-01-25 23:34 ` Scott Wood
2010-01-26 4:03 ` John Rigby
2010-01-26 16:39 ` Wolfgang Denk
2010-01-25 23:18 ` Joakim Tjernlund
2010-01-26 18:32 ` Wolfgang Denk
2010-01-25 23:22 ` Wolfgang Wegner
2010-01-26 19:03 ` Wolfgang Denk
2010-01-25 23:47 ` Mike Frysinger
2010-01-26 18:53 ` Wolfgang Denk
2010-01-26 23:57 ` Mike Frysinger
2010-01-27 19:15 ` Wolfgang Denk
2010-01-25 23:50 ` Scott Wood
2010-01-26 19:03 ` Wolfgang Denk
2010-01-26 19:09 ` Scott Wood
2010-01-26 4:12 ` Kumar Gala
2010-01-26 4:23 ` Li Yang-R58472
2010-01-26 20:26 ` Kumar Gala
2010-01-26 7:52 ` Swarthout Edward L-SWARTHOU
2010-01-26 19:16 ` Wolfgang Denk
2010-01-26 19:07 ` Wolfgang Denk
2010-01-26 20:26 ` Kumar Gala
2010-01-26 21:27 ` Wolfgang Denk
2010-01-26 5:55 ` Peter Tyser
2010-01-26 7:24 ` Anders Darander
2010-01-26 19:12 ` Wolfgang Denk
2010-01-26 8:13 ` Alessandro Rubini [this message]
2010-01-26 8:20 ` [U-Boot] typo ([STATUS] Patch status update) Alessandro Rubini
2010-01-26 19:33 ` [U-Boot] [STATUS] Patch status update Wolfgang Denk
2010-01-26 9:12 ` Ladislav Michl
2010-01-26 19:19 ` Wolfgang Denk
2010-01-26 22:04 ` Paulraj, Sandeep
2010-01-26 22:52 ` Wolfgang Denk
2010-01-27 17:50 ` Ladislav Michl
2010-01-26 9:19 ` Ben Warren
2010-01-26 19:48 ` Wolfgang Denk
2010-01-26 9:26 ` Daniel Gorsulowski
2010-01-26 19:50 ` Wolfgang Denk
2010-01-26 10:02 ` Stefan Roese
2010-01-26 19:52 ` Wolfgang Denk
2010-01-26 13:13 ` Matthias Weißer
2010-01-26 19:53 ` Wolfgang Denk
2010-01-26 14:48 ` Heiko Schocher
2010-01-26 21:19 ` Wolfgang Denk
2010-01-27 7:15 ` Heiko Schocher
2010-01-26 17:03 ` Nick Thompson
2010-01-26 21:21 ` Wolfgang Denk
2010-01-26 18:32 ` Hiremath, Vaibhav
2010-01-26 19:57 ` Kim Phillips
2010-01-29 13:31 ` Minkyu Kang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100126081343.GA7876@morgana.gnudd.com \
--to=rubini-list@gnudd.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox