[U-Boot] [PATCH] ppc4xx: Fix building for PLU405 boards

[U-Boot] [PATCH] ppc4xx: Fix building for PLU405 boards

[Matthias Fuchs]

The init_coupler() function from board/esd/plu405/plu405.c
got lost somehow! This patch readds it.

Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
---
 board/esd/plu405/plu405.c |   28 ++++++++++++++++++++++++++++
 1 files changed, 28 insertions(+), 0 deletions(-)

diff --git a/board/esd/plu405/plu405.c b/board/esd/plu405/plu405.c
index e385a78..0f7fa69 100644
--- a/board/esd/plu405/plu405.c
+++ b/board/esd/plu405/plu405.c
@@ -46,6 +46,34 @@ const unsigned char fpgadata[] =
  */
 #include "../common/fpga.c"
 
+/*
+ * generate a short spike on the CAN tx line
+ * to bring the couplers in sync
+ */
+void init_coupler(u32 addr)
+{
+	struct sja1000_basic_s *ctrl = (struct sja1000_basic_s *)addr;
+
+	/* reset */
+	out_8(&ctrl->cr, CR_RR);
+
+	/* dominant */
+	out_8(&ctrl->btr0, 0x00); /* btr setup is required */
+	out_8(&ctrl->btr1, 0x14); /* we use 1Mbit/s */
+	out_8(&ctrl->oc, OC_TP1 | OC_TN1 | OC_POL1 |
+	      OC_TP0 | OC_TN0 | OC_POL0 | OC_MODE1);
+	out_8(&ctrl->cr, 0x00);
+
+	/* delay */
+	in_8(&ctrl->cr);
+	in_8(&ctrl->cr);
+	in_8(&ctrl->cr);
+	in_8(&ctrl->cr);
+
+	/* reset */
+	out_8(&ctrl->cr, CR_RR);
+}
+
 int board_early_init_f(void)
 {
 	/*
-- 
1.6.1

[U-Boot] [PATCH] ppc4xx: Fix building for PLU405 boards

[Stefan Roese]

On Monday 01 February 2010 13:53:59 Matthias Fuchs wrote:
> The init_coupler() function from board/esd/plu405/plu405.c
> got lost somehow! This patch readds it.

Applied to u-boot-ppc4xx/master. Thanks.

Cheers,
Stefan

--
DENX Software Engineering GmbH,      MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich,  Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-0 Fax: (+49)-8142-66989-80 Email: office at denx.de