[U-Boot] [PATCH] ppc4xx: Fix building for PLU405 boards

Matthias Fuchs
2010-02-01T12:53:59Z

The init_coupler() function from board/esd/plu405/plu405.c
got lost somehow! This patch readds it.

Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
---
board/esd/plu405/plu405.c | 28 ++++++++++++++++++++++++++++
1 files changed, 28 insertions(+), 0 deletions(-)

diff --git a/board/esd/plu405/plu405.c b/board/esd/plu405/plu405.c
index e385a78..0f7fa69 100644
--- a/board/esd/plu405/plu405.c
+++ b/board/esd/plu405/plu405.c
@@ -46,6 +46,34 @@ const unsigned char fpgadata[] =
*/
#include "../common/fpga.c"

+/*
+ * generate a short spike on the CAN tx line
+ * to bring the couplers in sync
+ */
+void init_coupler(u32 addr)
+{
+ struct sja1000_basic_s *ctrl = (struct sja1000_basic_s *)addr;
+
+ /* reset */
+ out_8(&ctrl->cr, CR_RR);
+
+ /* dominant */
+ out_8(&ctrl->btr0, 0x00); /* btr setup is required */
+ out_8(&ctrl->btr1, 0x14); /* we use 1Mbit/s */
+ out_8(&ctrl->oc, OC_TP1 | OC_TN1 | OC_POL1 |
+ OC_TP0 | OC_TN0 | OC_POL0 | OC_MODE1);
+ out_8(&ctrl->cr, 0x00);
+
+ /* delay */
+ in_8(&ctrl->cr);
+ in_8(&ctrl->cr);
+ in_8(&ctrl->cr);
+ in_8(&ctrl->cr);
+
+ /* reset */
+ out_8(&ctrl->cr, CR_RR);
+}
+
int board_early_init_f(void)
{
/*
--
1.6.1