From mboxrd@z Thu Jan  1 00:00:00 1970
From: Scott Wood <scottwood@freescale.com>
Date: Tue, 16 Feb 2010 12:35:14 -0600
Subject: [U-Boot] [PATCH] add explicit bbt creation to commandline
In-Reply-To: <27571823.post@talk.nabble.com>
References: <27558231.post@talk.nabble.com>
	<20100212170411.GA21800@loki.buserror.net>
	<27566937.post@talk.nabble.com> <4B759454.8070906@freescale.com>
	<27567768.post@talk.nabble.com> <4B75A3BA.8000501@freescale.com>
	<27568153.post@talk.nabble.com> <27568365.post@talk.nabble.com>
	<4B75C6C0.8020706@freescale.com> <27571823.post@talk.nabble.com>
Message-ID: <20100216183514.GA26893@loki.buserror.net>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On Fri, Feb 12, 2010 at 06:14:51PM -0800, Steven Zedeck wrote:
> Its in board/atmel/at91sam9rlek/nand.c
> 
> It doesn't do much but set up the various GPIO connections. Here's the
> function:
> 
> int board_nand_init(struct nand_chip *nand)
> {
> 	nand->ecc.mode = NAND_ECC_SOFT;
> #ifdef CFG_NAND_DBW_16
> 	nand->options = NAND_BUSWIDTH_16;
> #endif
> 	nand->cmd_ctrl = at91sam9rlek_nand_hwcontrol;
> 	nand->dev_ready = at91sam9rlek_nand_ready;
> 	nand->chip_delay = 20;
> 
> 	return 0;
> }

Add "nand->options |= NAND_USE_FLASH_BBT;".

-Scott